Instruction/ maintenance manual of the product ZGW 1302 X Zanussi
Go to page of 11
GLASKERAMIK-KOCHFLÄCHEN D CERAMIC BUILT-IN HOBS GB ZG 1 102 / ZGW 1302 / ZGW 1302 X Gebrauchs- und Einbauanweisung Operating and assembly instructions ZANUSSI.
10 We congratulate you on choosing a ceramic hob of ZANUSSI. Thus you chose quality, innovation and durability. These operating and assembly instructions will allow you to become acquainted with the appliance and to do everything within its possibilities.
11 Content Please note in particular ........................................ 1 2 Unpacking and control ........................................... 1 3 Description of appliances ...................................... 1 3 Technical data ...............
12 The ceramic hob surface is resistant to extreme temperatures. Neither cold nor heat can harm it. Avoid to drop anything on the hob. Punctiform impacts, e.g. by the fall of a salt shaker, can cause fissures and cracks. If any cracks appear on the hob surface, the hob has to be switched off immediately.
13 Please examine the appliance for any damage sustained during transportation! If the appliance is damaged please immediately inform the forwarding company before the appliance is connected.
14 Cooking zones The cooking zones are clearly marked on the ceramic surface. They are operated by the corres- ponding switch box or built-in oven. The dimensions of the cooking zones are such that they accommo- date standard sized saucepans.
15 The maintenance remains the same for glass and ceramic hobs. Never use aggressive detergents or scou- ring powder and sponges with abrasive surfaces. Cleaning after each use Slight, not burnt soiling has to be wiped off with a damp cloth without using detergents.
16 Cut out worktop to prescribed measurements of templates (saw exactly along the scribing). Check seal for perfect fit and overall cover (see detail A). Lower the ceramic hob into place and align correctly. Fastening according to Fig. 1 Tighten bracket against the underside of the worktop.
17 You are able to clear the following defects: When the cooking zone does not heat up after you switched it on? = > Make sure that the fuse is turned on. You hear a buzzing when you heat up a zone? = > This is no defect. It stops with increasing heat.
ZG 1102 / ZGW1302 / ZGW 1302 X HN / HNW 112 H N 112 X HN / HNW 114 H N 114 X.
ZANUSSI Haushaltsgeräte GmbH Tel. : (0222) 79503-Serie Kundendienst-Zentrale Fa x : (0222) 7 9 8 0 1 6 3 ( 0222) 795 0322 (Geräteverkauf) Markhofgasse 19 (0222) 795 0323 (Ersatzteilverkauf) 1034 Wien Telex : 132 157 D A ZANUSSI Elektrogeräte GmbH Tel.
An important point after buying a device Zanussi ZGW 1302 X (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Zanussi ZGW 1302 X yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Zanussi ZGW 1302 X - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Zanussi ZGW 1302 X you will learn all the available features of the product, as well as information on its operation. The information that you get Zanussi ZGW 1302 X will certainly help you make a decision on the purchase.
If you already are a holder of Zanussi ZGW 1302 X, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Zanussi ZGW 1302 X.
However, one of the most important roles played by the user manual is to help in solving problems with Zanussi ZGW 1302 X. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Zanussi ZGW 1302 X along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
