Instruction/ maintenance manual of the product ZGG649 Zanussi
Go to page of 12
EN User manual Gas hob ZGG649 IL.
Contents Safety information _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 2 Installation _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 4 Product description _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 7 Operation _ _ _ _ _ _.
Installatio n • You must read these instructions. The manufacturer is not responsible for any injury to persons and pets or damage to property caused by failure to obey these re- quirements.
– Speak to your local authorised facilities for disposal of your appliance. Installation Warning! The following instructions about installation, connection and maintenance must be carried out by qualified personnel in compliance with standards and local regulations in force.
Adjustment of minimum level To adjust the minimum level of the burners: 1. Light the burner. 2. Turn the knob on the minimum position. 3. Remove the control knob. 4. With a thin screwdriver, adjust the by-pass screw po- sition. If you change from natural gas 20 mbar to liq- uid gas, fully tighten the adjustment screw in.
A B A - supplied seal B - supplied brackets Possibilities for inserti on Kitchen unit with door The panel installed below the hob must be easy to remove and let an easy access in case a technical assistance inter- vention is necessary.
Product description Cooking surface la yout 2 1 5 4 3 1 Semi-rapid burner 2 Semi-rapid burner 3 Control knobs 4 Auxiliary burner 5 Rapid burner Control knobs Symbol Description no gas supply / off pos.
Important! In the absence of electricity you can ignite the burner without electrical device; in this case approach the burner with a flame, push the relevant knob down and turn it counter-clockwise to maximum gas release position.
• Make sure you position the pa n supports correctly after cleaning. • To make burners work correctly, make sure that the arms of the pan supports are in the centre of the burn- er. • Be very careful when you replace the pan supports to prevent the hob top from damage.
If there is a fault, first try to find a solution to the problem yourself. If you cannot find a solution to the problem yourself, speak your dealer or the local Service Force Centre.
Appliance class: 3 By-pass diameters Burner Ø By-pass in 1/100 mm Auxiliary 28 Burner Ø By-pass in 1/100 mm Semi-rapid 35 Rapid 45 Gas burners BURNER NORMAL POWER NORMAL POWER LPG (Butane/Propane) G30/31 (3B/P) 30/30 mbar kW kcal/h inj. 1/100 mm g/h Auxiliary burner 0.
www.zanussi.com/shop 397195501-B-2010.
An important point after buying a device Zanussi ZGG649 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Zanussi ZGG649 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Zanussi ZGG649 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Zanussi ZGG649 you will learn all the available features of the product, as well as information on its operation. The information that you get Zanussi ZGG649 will certainly help you make a decision on the purchase.
If you already are a holder of Zanussi ZGG649, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Zanussi ZGG649.
However, one of the most important roles played by the user manual is to help in solving problems with Zanussi ZGG649. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Zanussi ZGG649 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
