Instruction/ maintenance manual of the product ZEL 640 Zanussi
Go to page of 24
ZEL 640 Electric hob Instruction booklet.
2 Thank you for selecting our appliance We wish you lots of enjoyment with your new appliance and we hope that you will consider our brand again when purchasing household appliances. Please read this user manual carefully and keep it throughout the product life cycle as a reference document.
3 Description of the Hob ....................................................................................... 3 Important Safety Information .............................................................................. 4 Before the First Use of the Appliance .
4 You MUST read these warnings carefully before installing or using the hob. If you need assistance, contact our Customer Care Department on 08445 612 612. Important Safety Information Installation • This hob must be installed by qualified personnel, according to the manufactur er’ s instructions and to the relevant British Standards.
5 Environmental information • All the materials used are environmentally friendly and recyclable. Please make your contribution to safeguarding the environment by using the special differentiated waste collection channels. • Appliances that are no longer used or unusable are not worthless waste.
6 Electric Hotplates To switch on a hotplate, turn the relevant control knob anticlockwise or clockwise to the required heat setting. The control knob is numbered 1 - 6 0 - OFF 1 - Minimum 6 - Maximum.
7 a red dot, and will heat up more quickly than a normal plate. As the red dots are painted on the plate, they may deteriorate during use and even disappear completely after a period of time.
8 For the correct use of the hot- plates For better efficiency of the electric hotplates and lower electricity consumption: • switch on the hotplates only after placing the pots on them. • For cooking on the electric hotplates it is advisable to use triple-bottom pots of the same width as the cooking zone, or slightly larger (Figure).
9 • Do not leave a hotplate switched on without a pot or with an empty pot. • Do not place a pot on a cold hotplate or leave it to cool on a switched-off hotplate.
10 Maintenance and Cleaning Before any maintenance or cleaning can be carried out, you must DISCONNECT the hob from the electricity supply . This appliance cannot be cleaned with steam or with a steam cleaning machine. The hob is best cleaned whilst it is still warm, as spillage can be removed more easily than if it is left to cool.
11 Something Not W orking? If the hob is not working correctly, please carry out the following checks before contacting your local Service Force Centre. IMPORTANT: If you call out an engineer to a fault listed below, or to repair a fault caused by incorrect use or installation, a charge will be made even if the appliance is under guarantee.
12 Engineers technical data Heating elements ratings Rapid front left hotplate Ø 180 mm 1500 W Rapid back left hotplate Ø 145 mm 1000 W Rapid front right hotplate Ø 145 mm 1500 W Rapid back right h.
13 Important safety requirements This hob must be installed in accordance with the IEE Wiring Regulations (Current Edition). Detailed recommendations are contained in the following British Standards Codes Of Practice: B.S. 6172/ B.S. 5440, Par. 2 and B.
14 Electrical Connections Any electrical work required to install this hob should be carried out by a qualified electrician or competent person, in accordance with the current regulations. THIS HOB MUST BE EARTHED. The manufacturer declines any liability should these safety measures not be observed.
15 similar characteristics: H05 V2V2-F. The cable has three wires. The earth wire is yellow/green and must be approx. 2 cm longer than the phase and neutral wires (Figure). Fit the cable with a plug suitable for the load and connect it to a suitable safety socket.
16 Electrical connection to the ter - minal box The appliance is fitted with a three pole terminal box whose cables are predisposed for a 230 V monophase function (Figure). The earth wire should be connected to the terminal marked by the sign . After having connected the wire to the terminal secure it with a cable clip.
17 Installation The hob must be installed according to the instructions supplied. The hob must be installed by qualified personnel qualified personnel qualified personnel qualified personnel qualified personnel to the relevant British Standards.
18 diagram. When the screws have been tightened, the excess seal can be removed. The edge of the hob forms a double seal which prevents the ingress of liquids.
19 ON/OFF SWITCH FLEX OUTLET 2 Building over a kitchen unit with door Proper arrangements must be taken in designing the furniture unit, in order to avoid any contact with the bottom of the hob which can be heated when it is operated. The recommended solution is shown in diagram 3.
20 Guarantee/Customer Service Standard guarantee conditions Standard guarantee conditions Standard guarantee conditions Standard guarantee conditions Standard guarantee conditions We, Zanussi-Electrol.
21 Service and Spare Parts Service and Spare Parts Service and Spare Parts Service and Spare Parts Service and Spare Parts In the event of your appliance requiring service, or if you wish to purchase .
22 This appliance is guaranteed by Electrolux in each of the countries listed at the back of this user manual, for the period specified in the appliance guarantee or otherwise by law.
23.
39715-6901 02/10 R.A www .zanussi.co.uk.
An important point after buying a device Zanussi ZEL 640 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Zanussi ZEL 640 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Zanussi ZEL 640 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Zanussi ZEL 640 you will learn all the available features of the product, as well as information on its operation. The information that you get Zanussi ZEL 640 will certainly help you make a decision on the purchase.
If you already are a holder of Zanussi ZEL 640, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Zanussi ZEL 640.
However, one of the most important roles played by the user manual is to help in solving problems with Zanussi ZEL 640. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Zanussi ZEL 640 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
