Instruction/ maintenance manual of the product ZBC 402 B/W Zanussi
Go to page of 12
CERAMIC BUILT-IN HOBS GB ZBC 402 B/W Operating and assembly instructions.
2 WARNINGS It is most important that this instruction book should be retained with the appliance for future reference. Should the appliance be sold or transferred to another owner, or should you move .
3 Warnings .............................................................. 2 Specifications ....................................................... 4 In st al la ti on ............................................................. 4 Electrical Connections .
4 SPECIFICATIONS Dimensions: ZBC 402 B/W Length 57 2 mm Width 5 0 2 m m Height 4 9 mm Cut Out dimensions Length 56 0 mm Width 4 9 0 m m Vo lt a ge 240 V ~ 50 Hz Total Power 5.
5 INSTALLATION Fig.2 sealing ceramic worktop When the cut out to the worktop is complete, lower the hob into position to ensure that fits. Remove the hob from the worktop and carry out the electrical connection as described under the Electrical Connection section.
6 ELECTRICAL CONNECTIONS Fig.1 Electrical connection Supply system 123 45 Single Phase LN Note: This appliance must be connected to a separate 30 AMP switch outlet. WARNING: TH IS APPLIANCE MUST BE EARTHED. The manufacturer declines any liability should this safety measure not be observed.
7 OPERATION Cooking Zones The hob has 4 ceramic cooking zones. All 4 cooking zones feature variable settings which are represented by numbered graduations on each control knob. Heat Control Knobs The control knobs enable the regulation from 1-9 of the heating capacity.
8 1. Before using your hob, always ensure that the sur- face of the cooking areas and the saucepans are clean and dry. Never cook directly on the cooking zones without using a cooking vessel. 2. Place the saucepans with contents onto the cooking area and turn the control knob to an appropriate setting.
9 COOKING EQUIPMENT Saucepans The heating zones are fitted with thermal limiters, which are a safety device to prevent the ceramic glass over- heating, larger pans can be used - up to 230 mm (9") base diameter on a nominal 180 mm (7") heated area - providing they do not overlap the hob trims.
10 MAINTENANCE AND CLEANING Before carrying out any maintenance and cleaning operations, make sure that the appliance is ISOLA- TED from the electricity supply.
11 PEACE OF MIND FOR 24 MONTHS Zanussi Standard Guarantee Conditions This guarantee is in addition to your statutory and other legal rights which will not be excluded or in any way diminished by the return of this guarantee card.
09.93 374 1043-05.
An important point after buying a device Zanussi ZBC 402 B/W (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Zanussi ZBC 402 B/W yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Zanussi ZBC 402 B/W - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Zanussi ZBC 402 B/W you will learn all the available features of the product, as well as information on its operation. The information that you get Zanussi ZBC 402 B/W will certainly help you make a decision on the purchase.
If you already are a holder of Zanussi ZBC 402 B/W, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Zanussi ZBC 402 B/W.
However, one of the most important roles played by the user manual is to help in solving problems with Zanussi ZBC 402 B/W. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Zanussi ZBC 402 B/W along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
