Instruction/ maintenance manual of the product CZ80CPU Xilinx
Go to page of 2
December 2007 CZ80CPU 8-Bit Microprocessor Core The CZ80CPU i mplements a fast, fully-functional, single-chip, 8-bit microprocessor w ith the same instruction set as the Z80. The core has a 16 -bit address bus capable of directly accessing 64kB of memory space.
CAST, Inc. 11 Stonewall Court Woodcliff Lake, NJ 07677 USA tel 201- 391 -8300 fax 201- 391 -8694 Copyright © CAST, Inc. 2007, All Rights Reserved. Contents subject to change without notice. Trademarks are the property of their respective owners. This core developed by the processor experts at Evatronix SA.
An important point after buying a device Xilinx CZ80CPU (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Xilinx CZ80CPU yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Xilinx CZ80CPU - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Xilinx CZ80CPU you will learn all the available features of the product, as well as information on its operation. The information that you get Xilinx CZ80CPU will certainly help you make a decision on the purchase.
If you already are a holder of Xilinx CZ80CPU, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Xilinx CZ80CPU.
However, one of the most important roles played by the user manual is to help in solving problems with Xilinx CZ80CPU. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Xilinx CZ80CPU along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center