Instruction/ maintenance manual of the product 590-00 Xantech
Go to page of 8
127 Controllers INST ALLA TION INSTRUCTIONS 590-00 PROGRAMMABLE CONTROLLER FRONT PANEL The front panel of the 590 is made of acrylic plastic. It should be cleaned with a soft cloth as it scratches easily. Behind the panel are five red LEDs and an infrared sensor.
128 590-00 SCREW TERMINALS Opto-Isolator Inputs - 16 pairs of positive and negative terminals, isolated from ground. O - Infrared Output - Positive terminal for the IR output signal.
129 Controllers 590-00 3. Press and hold down the key for the 590 input into which you wish to store the command. Remember, the " key " may be a contact closure push-button device, such as the Xantech 598 keypad (Fig.
130 short tap for its command to be properly executed, then only a short burst of it should be stored in the 590. Step 4 would, therefore, be modified as follows: 4.
131 Controllers 590-00 A sequence is completed. You may now test it by pressing the ON/OFF key (bank 1). It should now send the three commands to turn the AM/FM receiver ON, turn the VCR ON and select the VCR Input on the receiver, in that order.
132 • By plugging the Model 781C-00 power supply into the switched AC outlet on the back of a stereo receiver, a constant 12V DC is applied to the 599. The 599 generates a short pulse (+12V, 100 mSec) at its ON terminal when it first sees +5 to +30V DC at its IN+ and IN– terminals (the stereo receiver is turned on).
133 Controllers The circuit below, Fig. 1, shows a simple means of using a door chime or door bell to activate one of the inputs on a Xantech Model 590 Programmable Controller, to initiate a system function or functions.
134.
An important point after buying a device Xantech 590-00 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Xantech 590-00 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Xantech 590-00 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Xantech 590-00 you will learn all the available features of the product, as well as information on its operation. The information that you get Xantech 590-00 will certainly help you make a decision on the purchase.
If you already are a holder of Xantech 590-00, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Xantech 590-00.
However, one of the most important roles played by the user manual is to help in solving problems with Xantech 590-00. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Xantech 590-00 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
