Instruction/ maintenance manual of the product HK-102 Worksaver
Go to page of 12
ST A TEMENT OF POLICY It is the policy of Worksaver , Inc. to improve its products where it is possible and practical to do so. Worksaver , Inc. reserves the right to make changes or improvements in design and construction at any time, without incurring the oblig- ation to make these changes on previously manufactured units.
REF . P ART NO. NO. NO. DESCRIPTION REQ. 1 865104 Main Frame Weldment (HK-102) 1 2 2504049 Drive Zerk 5 / 16 ” 1 3 2503002 Bolt 3 / 4 ” – 10 NC x 2” Hex Head 2 4 590072 T op Link, Cat.
2 9 All equipment is potentially hazardous. There is no substitute for a cautious, safe-minded operator who recognizes potential hazards and follows reasonable safety practices.
3 8 When maneuvering close to buildings or passing through narrow areas, be sure to allow sufficient clearance for the implement. Do not operate close to ditches or creeks. Slow down when operating over rough ground. Always be sure the implement is in the fully raised position when in transport.
7 TRACTOR PREP A R A TION Be sure tires and rims are in good condition. Inflate tires to the proper recommended air pressure. Check the tractor ’s hydraulic system. Refer to your tractor operator ’s manual or dealer for any adjustments necessary to put the hydraulic system in good working order .
5 ASSEMBL Y (continued) Attach the two lift control arms (slotted end goes to the hitch main frame) to the hydraulic lift quadrant on the tractor . Using one of the 5 / 8 ” – 1 1 x 2 1 / 4 ” hex head bolts, 2 flat washers, and locknut, attach the other end to the upright arm on the main frame (arm without ball socket).
5 ASSEMBL Y (continued) Attach the two lift control arms (slotted end goes to the hitch main frame) to the hydraulic lift quadrant on the tractor . Using one of the 5 / 8 ” – 1 1 x 2 1 / 4 ” hex head bolts, 2 flat washers, and locknut, attach the other end to the upright arm on the main frame (arm without ball socket).
7 TRACTOR PREP A R A TION Be sure tires and rims are in good condition. Inflate tires to the proper recommended air pressure. Check the tractor ’s hydraulic system. Refer to your tractor operator ’s manual or dealer for any adjustments necessary to put the hydraulic system in good working order .
3 8 When maneuvering close to buildings or passing through narrow areas, be sure to allow sufficient clearance for the implement. Do not operate close to ditches or creeks. Slow down when operating over rough ground. Always be sure the implement is in the fully raised position when in transport.
2 9 All equipment is potentially hazardous. There is no substitute for a cautious, safe-minded operator who recognizes potential hazards and follows reasonable safety practices.
REF . P ART NO. NO. NO. DESCRIPTION REQ. 1 865104 Main Frame Weldment (HK-102) 1 2 2504049 Drive Zerk 5 / 16 ” 1 3 2503002 Bolt 3 / 4 ” – 10 NC x 2” Hex Head 2 4 590072 T op Link, Cat.
ST A TEMENT OF POLICY It is the policy of Worksaver , Inc. to improve its products where it is possible and practical to do so. Worksaver , Inc. reserves the right to make changes or improvements in design and construction at any time, without incurring the oblig- ation to make these changes on previously manufactured units.
An important point after buying a device Worksaver HK-102 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Worksaver HK-102 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Worksaver HK-102 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Worksaver HK-102 you will learn all the available features of the product, as well as information on its operation. The information that you get Worksaver HK-102 will certainly help you make a decision on the purchase.
If you already are a holder of Worksaver HK-102, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Worksaver HK-102.
However, one of the most important roles played by the user manual is to help in solving problems with Worksaver HK-102. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Worksaver HK-102 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
