Instruction/ maintenance manual of the product ICE-100S Whynter
Go to page of 8
SNO 3 IN 1 ICE MAKER, CRUSHER & WATER DISPENSER MODEL: ICE-100S.
Introduction Thank you for purchasing this SN O 3 IN 1 ICE MAKER, CRUSHER AND WATER DISPENSER by Whynter. To ensure that you enjoy years of trouble-free oper ation, please read and follow the instruct ions contained in this manual. Please retain these instructions for future reference.
Controls Please refer to the diagrams below and famil iaris e yourself with the operatin g buttons. [ON/OFF] Power switch [START] Starts ice/iced water production [STOP] Stops the ice /iced wate r pro.
Installation Instructions 1) As with all refrigeration equipment, this appliance should be settled for at least five hours prior to swit ching on the appl iance. 2) The power supply must be an earthed 110V AC 60Hz mains supply. 1) Choose your required wat er supply method: a.
2) Using the ON/OFF sw itch (1) at the side of the unit, switch the power ON. The POW ER light (8) on the top of the u nit will i lluminate red. 3) Pre ss the START button (2) at the top of the unit. The water level will be automatically ch ecked and, if correctly f illed, the red light will turn green.
Main tena nce 1) Do not use any commercial chemical cleaning agent, acidic agent, naphtha decontami nation powders, etc to clean the machine. Our recommended cleaning agent is vinegar and water solution. 2) Cleaning agent must be added through the ma nu al fill compartment (10) only.
2. Unit needs to be rest arte d. 3. Insufficient water pressure. 4. Bottle has a cap or seal. facing front and center. 2. Turn of f the unit for a minute and turn ba ck on then push St ar t butto n. 3. Tak e of f th e bot t le an d manual fill the unit with wat e r .
ONE YEAR LIMITED WARRANTY This WHYNTER SNO 3 in 1 ice maker is warranted, to the original owner within the 48 continental states, for one year from the date of purchase against defects in material and workm anship under normal use and service.
An important point after buying a device Whynter ICE-100S (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Whynter ICE-100S yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Whynter ICE-100S - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Whynter ICE-100S you will learn all the available features of the product, as well as information on its operation. The information that you get Whynter ICE-100S will certainly help you make a decision on the purchase.
If you already are a holder of Whynter ICE-100S, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Whynter ICE-100S.
However, one of the most important roles played by the user manual is to help in solving problems with Whynter ICE-100S. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Whynter ICE-100S along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
