Instruction/ maintenance manual of the product SC 8630 Whirlpool
Go to page of 5
IMPORTANT: Read and save these instructions. IMPORTANT: Installer: Leave Installation Instructions with the homeowner, Homeowner: Keep Installation Instructions for future reference. Save Installation Instructions for local electrical inspector’s use.
Before you start... This cooktop is not approved for use with downdraft Proper installation is your responsibility. Make vent systems. sure you have everything necessary for correct installation. It is the responsibility of the installer to comply with the installation clearances specified on the serial/rating plate.
Tools needed for installation: ipe wrench flat-blade screwdriver ’ adjustable !?” wrench tape measure/ruler Gas supply requirements Observe all governing codes and ordinances. Fire Hazard l Cooktop must be connected to a regulated gas supply. l Do Not use an open flame to test for leaks from gas connections.
Numbers correst3ond to 5 n Insert cooktop into cutout while aligning rear of cooktop with pencil line. Check that cooktop is parallel to the front edge of countertop. Lift the entire cooktop to make adjustments so that the foam tape can seal properly.
If cooktop does not operate... Check that the circuit breaker is not tripped or house fuse blown. Check that power supply cord is plugged into wall receptacle. Check that gas valves are turned to the “ON” position. A more detailed troubleshooting checklist is provided in the Use and Care Guide, If you need asshtance.
An important point after buying a device Whirlpool SC 8630 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Whirlpool SC 8630 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Whirlpool SC 8630 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Whirlpool SC 8630 you will learn all the available features of the product, as well as information on its operation. The information that you get Whirlpool SC 8630 will certainly help you make a decision on the purchase.
If you already are a holder of Whirlpool SC 8630, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Whirlpool SC 8630.
However, one of the most important roles played by the user manual is to help in solving problems with Whirlpool SC 8630. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Whirlpool SC 8630 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center