Instruction/ maintenance manual of the product RC8200XK Whirlpool
Go to page of 8
01 ELECTRIC COOKTOP lModil RC8200XK Copy Your Model and Serial Numbers Here If you need service, or call with a ques- tion, have this information ready: Q 1. Complete Model and Serial Num- Model Number bers. [Remove the right front surface unit and reflector bowl to see the plate on the right inside wall of your T cooktop.
Your responsibilities.. l Installation and proper, safe use are your personal responsibilities. Read this “Use and Care Guide“ and the “Cooking Guide” carefully for important use and safety information. You must be sure your cooktop is... l installed and leveled in a countertop and cabinet that’ .
.
Using your cooktop Control knobs must be pushed in before turning them to a setting. They can be set anywhere between HI and OFF. PUSH IN. Turn to setting. en a SUI Vace ff when you a not cooking. Until you get used to the settings, use the following as a guide.
Cleaning and caring for your cooktop CONTROL PANEL AND KNOBS / Y Pull knobs straight off. First make sure thev are set on OFF. - Use warm soapy water and a soft cloth to wipe the panel. Rinse and wipe dry. Wash knobs in warm soapy water. Rinse well and dry.
1. Be sure surface unit controls are OFF. Receptacle Bowl Opening 2. Line up opening in the reflector bowl with the surface unit receptacle. Terminal ptacle 3. Hold the surface unit as level as possible with the terminal just started into the receptacle.
Accessory Canning Kit (Part No. 242905) The large diameter of most water-bath or pressure canners combined with high heat settings for long periods of time can shorten the life of regular surface units and cause damage to the cooktop. If you plan to use the cooktop for canning, we recommend the installation of a Canning Kit.
FSP IS a registered trademark of Whirlpool Corporation for 0 quallty’prts. Look for this FSP symbol of quality whenever you need a replacement par1 8 for your Whirlpool appliance FSP replacement parts will fll right and work right, because they are made to the same exacting specifications used to build every new Whlrlpml appliance.
An important point after buying a device Whirlpool RC8200XK (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Whirlpool RC8200XK yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Whirlpool RC8200XK - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Whirlpool RC8200XK you will learn all the available features of the product, as well as information on its operation. The information that you get Whirlpool RC8200XK will certainly help you make a decision on the purchase.
If you already are a holder of Whirlpool RC8200XK, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Whirlpool RC8200XK.
However, one of the most important roles played by the user manual is to help in solving problems with Whirlpool RC8200XK. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Whirlpool RC8200XK along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
