Instruction/ maintenance manual of the product P73309 Belkin
Go to page of 11
USB Serial Adapter User Manual F5U103 P73309.
.
Compatible Devices MODEM.CPL, a component of Windows ® 98. The easiest solution to this problem is to attach the USB Serial Adapter to either the root hub (a USB port on the back of your PC) or to a hub that is connected to the root hub.
5. T roubleshooting 5. T roubleshooting 5.1. Port unavailable If the installation of the USB Serial Adapter has been completed but the port is unavailable to applications, follow the instructions below to diagnose the problem: 1. Check the LEDs on the USB Serial Adapter .
1. Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2 2. Device Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2 2.1. Environmental Conditions . . . . . . . . . . . . . . .
1. Introduction 1. Introduction The USB Serial Adapter provides a standard serial interface to a PC equipped with USB without requiring an add-in card.
4.2. Adding Non-Plug-and-Play (Legacy) Devices Non-Plug-and-Play devices must be added through the “Add New Hardware Wizard” in the “Control Panel”. Using this wizard, follow the installation instructions that came with your device. 4.3. LED Indicator Lights There are three LEDs on the USB Serial Adapter .
4. Using the USB Serial Adapter 3.4. Uninstalling the USB Serial Adapter Drivers 1. Unplug all USB Serial Adapter devices from the USB ports. 2. Open the “ Control Panel” and double-click on “ Add/Remove Programs” . 3. On the Install/Uninstall page, click on “ USB Serial Adapter” software from the list box and click “ Add/Remove” .
3. Installation 3. Installation 3.1. Installing Windows ® 98 Drivers 1. Insert the CD labeled “ USB Serial Adapter Installation” into your CD drive (typically drive D:). 2. Insert the flat (type A) connector into an available USB port on your PC or USB hub attached to your PC.
3.2. Installing Windows ® 95 Drivers 1. Insert the CD labeled “ USB Serial Adapter Installation” into your CD drive (typically drive D:). 2. Insert the flat (type A) connector into an available USB port on your PC or USB hub attached to your PC. 3.
3.3. Adding DOS Box Support (Optional) DOS Box support for the USB Serial Adapter is useful if you intend to use DOS applications, but not necessary for Windows ® applications . If you are using only Windows ® applications, it is recommended that you do not install this feature as it uses resources.
An important point after buying a device Belkin P73309 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Belkin P73309 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Belkin P73309 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Belkin P73309 you will learn all the available features of the product, as well as information on its operation. The information that you get Belkin P73309 will certainly help you make a decision on the purchase.
If you already are a holder of Belkin P73309, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Belkin P73309.
However, one of the most important roles played by the user manual is to help in solving problems with Belkin P73309. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Belkin P73309 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
