Instruction/ maintenance manual of the product Trans-X Waves
Go to page of 8
Waves Trans-X software guide page 1 of 8 W a v es – T r ans-X Softw ar e Audio Processor User’ s Guide.
Waves Trans-X software guide page 2 of 8 Chapter 1 – Introduction and Overview The Waves Trans-X transient processor is a special breed of dynamics processor designed specifically for det ecting and shaping the transient attacks of audio signals. This is useful for adding or reducing the punch or pluck of a certain instrument.
Waves Trans-X software guide page 3 of 8 The Multiband plug-in splits the progr am to four bands by engaging three phase-compensated crossovers. The cro ssover design is identical to the Waves C4. In the multiband component you can specify a dedicated range and sensitivity for each band.
Waves Trans-X software guide page 4 of 8 Chapter 2 – Using the Trans-X Although using the Trans-X is easy (there are only a few controls to set), there is still a range of subtle nuances and gener al functionality that gives complex results.
Waves Trans-X software guide page 5 of 8 Note! When boosting the range, it is important to anticipate the drop in overall track level. You may then use the Auto Trim button to bring the output level back up to just below clipping. Moderate the range to fit your needs.
Waves Trans-X software guide page 6 of 8 Chapter 3 – Controls and displays T RANS -X C ONTROLS R ANGE : +18 to –24dB. Default: +6dB. The range control defines the maximu m gain adjustment possible. When set to +18dB, it means that it will boost up to 18dB more and never go over the range limit.
Waves Trans-X software guide page 7 of 8 R ELEASE : 0.50 to 500ms. Default:10.02ms. This is the release time for the gain adj ustment. Once the detected transient is over, this is the time it will take the gain adjustment to settle back to 0dB.
Waves Trans-X software guide page 8 of 8 T RANS -X D ISPLAYS G AIN A DJUSTMENT METERS : The Trans-X Wide shows a gain adjust ment meter where the range is indicated by purple shading and a yello w line represents t he gain adjustment within the range.
An important point after buying a device Waves Trans-X (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Waves Trans-X yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Waves Trans-X - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Waves Trans-X you will learn all the available features of the product, as well as information on its operation. The information that you get Waves Trans-X will certainly help you make a decision on the purchase.
If you already are a holder of Waves Trans-X, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Waves Trans-X.
However, one of the most important roles played by the user manual is to help in solving problems with Waves Trans-X. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Waves Trans-X along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
