Instruction/ maintenance manual of the product Series 97 Watlow Electric
Go to page of 4
SERIES 97 An Over -temperature Limit Contr oller With User Defined Messages W atlow’ s SERIES 97 is a microprocessor-based controller with a single input, second auxiliar y input and f our outputs. Input one is used to measure temperature from a sensor .
Specifications Controller • Microprocessor-based • Universal input 1, auxiliary input 2, 4 outputs • Input sample period; Single input 10Hz (100 msec), dual input 5Hz (200 msec) digital filter.
Thermocouple Inputs • Calibration accuracy ±0.1 percent of span ±1˚C at standard conditions Exceptions: T ype T; 0.12 percent of span for -200°C to -50°C (-328°F to -58°F) T ypes R and S; 0.15 percent of span f or 0°C to 100°C (32°F to 212°F) T ypes B; 0.
Ordering Inf ormation SERIES 97 9 7 - - Microprocessor-based 1 ⁄ 16 DIN with universal input 1, thermocouple and RTD . Options include: softw are, power supply , input 2, four outputs and displa y c.
An important point after buying a device Watlow Electric Series 97 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Watlow Electric Series 97 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Watlow Electric Series 97 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Watlow Electric Series 97 you will learn all the available features of the product, as well as information on its operation. The information that you get Watlow Electric Series 97 will certainly help you make a decision on the purchase.
If you already are a holder of Watlow Electric Series 97, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Watlow Electric Series 97.
However, one of the most important roles played by the user manual is to help in solving problems with Watlow Electric Series 97. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Watlow Electric Series 97 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
