EN
ViewSonic logo
Official user manual

ViewSonic P95f+

19 pages·840 KB·Computer Monitor·PDF·ENDEFRITNLJA
ViewSonic P95f+
Table of Contents 39 sections P95f+P95f +B · Color Monitor · User Guide · User Guide · … ShowHide
Page 1 of the ViewSonic P95f+ user manual — Guía del usuario
Page 1 · click to enlarge
Page 1

P95f+P95f +B

Color Monitor

User Guide

User Guide

Bedienungsanleitung

ViewSonic P95f+ — User Guide diagram (page 1)
Fig. 1 · User Guide

Guía del usuario

Guida dell'utente

Guia do usuário

Användarhandbok

Käyttöopas

Instrukcja obs à ugi

With Plug & Play

19" (18.0" Viewable Diagonal)

Ɋɭɤɨɜɨɞɫɬɜɨ ɩɨɥɶɡɨɜɚɬɟɥɹ

Page 2 of the ViewSonic P95f+ user manual — P95f+P95f +B
Page 2 · click to enlarge
Page 2
Page 2 of the ViewSonic P95f+ user manual — P95f+P95f +B
Page 3 of the ViewSonic P95f+ user manual — Product registration
Page 3 · click to enlarge
Page 3

Copyright © ViewSonic Corporation, 2002. All rights reserved.

Macintosh and Power Macintosis are registered trademarks of Apple Computer, Inc.

Microsoft, Windows, Windows NT and the logo of Windows are registered trademarks of Microsoft Corporation in the United States and other countries.

ViewSonic and the logo of all three birds, as well as OnView, ViewMatch and ViewMeter are registered trademarks of ViewSound Corporation.

VESA is a registered trademark of Video Electronics Standards Association. DPMS and DDC are trademarks of VESA.

ENERGY STAR® is a registered trademark of the American Environmental Protection Agency (EPA).

As a partner of ENERGY STAR®, ViewSonic Corporation states that this product complies with the Energy Efficiency Guidelines for ENERGY STAR.

Disclaimer: ViewSonic Corporation disclaims any liability for technical or printing errors, as well as omissions in this manual, and direct or indirect damages resulting from the delivery, performance or use of this product.

In the interests of continuous improvement, ViewSonic reserves the right to modify product characteristics without prior notice. The information contained in this document may change without notice.

Any representation or reproduction, in whole or in part, by any process without the consent of ViewSonic Corporation is unlawful.

Product registration

To enable us to meet your needs and if you wish to obtain further information on the development of this product, please register your product via Internet at: www.viewsonic.com. The ViewSonic® Wizard CD-ROM (ViewSonic Assistant) also allows you to print the registration form, which can be sent by email or fax to ViewSound.

Product Name: Model Number: Document Number: Serial Number: Purchase Date:

ViewSonic P95f+ / P95e+B VCDTS23956-1/VCDTS23966-2 A-CD-P95e + / P 95e+ B-1

Disposal of product at the end of its useful life ViewSonic is concerned about environmental protection. Please remove this product at the end of its useful life. For more information, contact your local waste disposal company.

For reference

Page 4 of the ViewSonic P95f+ user manual — Precautions for use
Page 4 · click to enlarge
Page 4

Starting

Thank you for choosing a ViewSonic® color monitor. Important: Keep the original package. It may be reused subsequently in the event of transport of equipment.

  • Your product contains the following:
  • Colour Monitor
  • DB-15 video cable (connected)
  • Power cable
  • ViewSonic Wizard CD-ROM (ViewSonic Assistant)

NOTES: The CD cover contains the Handheld Guide, and the CD includes PDF files from the User's Guide and INF/ICM view optimization files. The INF file ensures compatibility with Windows operating systems and the ICM (Image Color Matching) file guarantees precise screen colors. ViewSonic advises you to install both files.

Precautions for use

  • For optimal vision conditions, place at least 45 cm away from the monitor.
  • AVOID TOUCHING THE SCREEN WITH YOUR FINGERS. Fingerprints are hard to remove.
  • NEVER PULL UP THE BACK PANEL. The monitor contains high voltage electrical components. If you touch them, you may electrocute.
  • Avoid exposing the monitor to direct sunlight or any other heat source, including open flame. To reduce the reflections, avoid placing the monitor in front of a direct light source.
  • Take the necessary precautions when moving your monitor.
  • Place your monitor in a well ventilated area. Do not place any objects on your monitor that would prevent the proper dissipation of heat.
  • Make sure the monitor is in a clean, moisture-free location.
  • Keep the monitor away from magnets, motors, transformers, speakers and TV sets.
  • Do not place heavy objects on the monitor, video cable or power cable.
  • If there is smoke, abnormal noise or suspicious smell, turn off the monitor immediately and contact your dealer or ViewSonic. Use under such conditions would be dangerous.
Page 5 of the ViewSonic P95f+ user manual — Fast installation
Page 5 · click to enlarge
Page 5

Fast installation

1 Connection of the power cable Connect the power cable to a plug with grounding. 2 Connection of the video cable Make sure the monitor and computer are turned ON OUT OFTENSION. • Connect the video cable to your computer. Users of Macintosh®: Macintosh adapter is required if you are using a computer prior to the G3 model. Attach the adapter to your computer, then connect the video cable to the adaptor. To order a Macintosh Viewsonic® adapter, contact Viewsonian. See "Customer Support" on page 13. 3 Start of monitor and computer First turn on the monitor, then the computer. This order (a monitor before computer) is very important. NOTES: At this point, it is possible that Windows users will see a message appear asking them to install the INF file. 4 Installation of display optimization files (INF and ICM) (1) Insert ViewSonic Wizard CD-ROM (ViewSonic Assistant) into your computer's CD-Rom drive. NOTES: If your computer does not have a CD-ROM player, see the "Customer Support" section on page 13.

(2) Wait for the CD-ROM to start automatically. NOTES: if the CD-ROM does not start automatically: double click on the icon of the CD ROM in Windows Explorer, then on the executable file viewsonic.exe. (3) Follow the instructions displayed on screen. 5 Windows users: configure mode synchronization (resolution and update frequency) Example: 1280 x 1024 to 75 Hz. For instructions on changing resolution and updating frequency, see the user guide to your graphics card. Installation is complete. Enjoy your new ViewSonic color monitor. In case you need to contact customer service, prepare the following: Print this user guide and report serial number (inscribed on your monitor's back) in section "For reference" on page 2. To register your product online access www.viewsonic.com. The ViewSonic Wizard CD-ROM (ViewSonic Assistant) also allows you to print the registration form, which can be sent by email or fax to ViewSound.

ViewSonic P95f+ — Fast installation diagram (page 5)
Fig. 2 · Fast installation

d-power supply Alternative wall power outlet

(continued) · Cable · Video cable

Page 6 of the ViewSonic P95f+ user manual — OSD Lock Settings (OSD Lock Options)
Page 6 · click to enlarge
Page 6

Use of the monitor

Configuring the sync mode

It is important to configure the synchronization mode in order to optimize image quality and reduce eye fatigue. The sync mode includes the resolution (e.g. 1280 x 1024) and the frequency of updating (or vertical frequency, e.g. 75 Hz). After setting the sync mode, use OnView® to set the image.

For better image quality, configure the synchronization of your monitor as follows: VESA 1280 x 1024 to 75 Hz or VESA 1600 x 1200 to 75 Hz.

To resolve the resolution, proceed as follows:

1 Right click from Windows desktop. 2 In the drop-down menu that appears, click on Properties. 3 Click on the tab Parameters. 4 Drag the pointer that indicates Office area or Area of the crane.

OSD Lock Settings (OSD Lock Options)

You can use the OSD (On Screen Display - On-screen display) lock function, OSD LOCK, to avoid changes in current image settings.

  • OSD Lock (OSD lock): Press the buttons [1] and [ ▼ ] on the front of the monitor for 5 seconds. The "OSD LOCK" message will then briefly display to indicate that the OSD settings of the image are now locked.
  • OSD Unlock (OSD unlocking): Press the buttons [1] and [ ▼ ] again for 5 seconds. The "OSD UNLOCK" message will then briefly display to indicate that the OSD settings in the image are now unlocked.
Page 7 of the ViewSonic P95f+ user manual — Setting the image to screen
Page 7 · click to enlarge
Page 7

Setting the image to screen

Use the front control panel buttons to display and adjust the OnView® controls that appear on the screen. OnView commands are described on the next page and are defined in "Main Menu Commands" on page 8.

ViewSonic P95f+ — Setting the image to screen diagram (page 7)
Fig. 3 · Setting the image to screen

Allows you to switch from normal Brightness mode to UltraBrite and vice versa.

Show the main menu (main menu); saves changes / leaves the main Menu

Scroll menu options to set the selected command

Display the control setting screen selected (or torque of controls). Also passes from one control to the other on a few adjustment screens

Page 8 of the ViewSonic P95f+ user manual — To set the image to screen, proceed as follows:
Page 8 · click to enlarge
Page 8

To set the image to screen, proceed as follows:

1 To display the Main Menu (Main menu), press the button [1].

ViewSonic P95f+ — To set the image to screen, proceed as follows: diagram (page 8)
Fig. 4 · To set the image to screen, proceed as follows:
ViewSonic P95f+ — To set the image to screen, proceed as follows: diagram (page 8)
Fig. 5 · To set the image to screen, proceed as follows:

2 To select the control to be set, press the arrow buttons on your monitor's frontal control panel and scroll through the options. When the desired command is selected, press the button [2].

3 To set the selected command, such as CONTRAST (Contrast) in the example below, press the arrow buttons.

ViewSonic P95f+ — To set the image to screen, proceed as follows: diagram (page 8)
Fig. 6 · To set the image to screen, proceed as follows:

4 Press twice on the button [1] to save changes and exit the menu.

Page 9 of the ViewSonic P95f+ user manual — Control Explanation
Page 9 · click to enlarge
Page 9

Hand menu commands (main menu)

Set the menu items described below, using both high and low buttons.

Control Explanation

Contrast (Contrast) allows to adjust the difference between background (black level) and foreground (white level) of image.

Brightness allows to adjust the level of black from background image to screen.

Zoom allows to enlarge and reduce the size of the image on screen.

Horizontal Position (horizontal position) allows to move the image left or right.

Horizontal Size allows to adjust the width of the image.

Vertical Position allows to move the image up or down.

Vertical Size allows to adjust the height of the image.

Pincushion (Cushion effect) allows to bend the vertical sides of the image on screen.

Pin Balance (parallel cushion effect) allows to bend the vertical edges of the image on screen to left or right.

Trapezoid (Trapeze) allows to adjust the top and bottom of the image on screen until they are equal in width.

Parallel (Parallelogram) allows to tilt the vertical edges of the image on screen until they are parallel.

Tilt allows to rotate the entire image.

Page 10 of the ViewSonic P95f+ user manual — Control Explanation
Page 10 · click to enlarge
Page 10

Control Explanation

Degauss (Demagnetization) eliminates the accumulation of magnetic fields that can cause irregular colors to appear around the edges of images. There are two ways to demagnetize the display: automatically, by turning on the monitor or manually, selecting Degauss (Demagnetization) from the menu. To manually demagnetize your monitor, select the Degauss command (Demagnetization) from the menu and then press the [2] button. Important: Do not demagnetize repeatedly. This could be detrimental to the health of people. Wait at least 20 minutes before selecting this command again.

ViewMatch® Color (ViewMatch color) offers several color options: multiple predefined colour temperatures and User Color (User colors) which allows you to adjust red (red - R) and blue (blue - B). NOTE: Green (G) is fixed. The factory setting for this product is 9300K (9,300° Kelvin). 9300K — Adds blue to the image for a colder white (used in most office configurations with fluorescent lighting). 6500K — Add red to the image to get a white with warmer shades and richer red. 5000K — Add blue and green to the image to get a darker color. User Color — Individual settings for red and blue. NOTES: the green is fixed.

Moire (Moor) reduces interference patterns that result in undulations, waves or color anomalies in background textures. The interference patterns of this type are particularly noticeable when you observe images with sparsely spaced lines or finely detailed motifs.

Language selects the language used in menus and setting screens: English (English), French (French), German (German), Italian (Italian) or Spanish (Spanish).

Horizontal Convergence allows to adjust the vertical alignment of colors. Vertical Convergence allows to adjust horizontal alignment of colors. NOTES: Use these commands when red or blue edges appear around horizontal or vertical segments of black letters on white background.

Page 11 of the ViewSonic P95f+ user manual — Control Explanation
Page 11 · click to enlarge
Page 11

Control Explanation

Purity allows you to adjust the color irregularities on screen. For example, if one area appears darker than another, first use the DEGAUSS function (Demagnetization). If the colors are still irregular, use PURITY (Purity) command.

Memory Recall allows you to return to the factory settings if the display works in predefined synchronization mode mentioned in this guide. Exception: this command does not affect the modifications made with the help of the control User Color.

ViewMeter® allows to display the frequencies (horizontal and vertical) of the computer graphics card.

Page 12 of the ViewSonic P95f+ user manual — Further information
Page 12 · click to enlarge
Page 12

Further information

Characteristics

CRT Type Not Phosphorus Glass surface

19" (visible diagonal of 18.0"), 90° 0.25 mm deflection (centre), 0.27 mm (coin) RGB (RGB) B22, short/medium persistence TM~38%, anti-reflective, antistatic with AR film

Inlet signal Synchr video.

Analog RGB (RGB) (0.7/1.0Vp-p, 75 Ohms) fH: 30-110 kHz, Fv: 50-160 Hz Separate HV (TTL), Composite

Compatibility PC Macintosh1

VGA up to 1856 x 1392 Compatible with Power Macintosh from 640 x 480 to 1600 x 1200 (may require a Macintosh adapter)

Resolution Recommended and compatible

1280 x 1024 to 75 Hz 1600 x 1200 to 75, 85 Hz 1024 x 768 to 75 and 85 H 800 x 600 to 85 HZ 640 x 480 to 60 Hz 640 X 400 to 70 Hz MAC 640 × 480 at 67 Hz Mac 832 x 624 to 75% Hz MAC 1024 X 768 at 75 HZ MAC 1152 x 870 at 75Hz

Food CA voltage 90-264 VAC (automatic switch) 50/60 (+/- 3) Hz

Display area Default Full Scan

353 mm (H) x 265 mm (V) (standard) 360 mm (W) x 270 mm (D) (depending on signal synchronization)

0° C to +40° C (+32° F to +104° F) 5 % to 95 % (without condensation) Up to 3,000 meters (10,000 feet)

-40° to +60°C (-40° to +140°F) 5 % to 95 % (without condensation) Up to 12,000 meters (40,000 feet)

460 mm (L) x 458 mm (H) x 470 mm (P) 18,1" (L) x 18,0" (H) x 18,5" (P)

Weight Net 23.5 kg (51.7 pounds) (monitor only)

Standards UL 1950, CUL, DHHS, FCC, CB, DOC, ICES-003, Class B, (EPA) ENERGY STAR®, NAME, CE, PCBC, TUV/GS, VCCI, BSMI, CEAA, C-Tick, TUV/Ergo, Energy (Swiss), NEMKO, SEMKO , DEMKO, FIMKO, GOST-R, PSB, TCO99, Argentina-TUV/S

< 97W STANDARD (voyant vert) < 5W (voyant orange)

1 Macintosh adapter is required for pre-G3 Macintosoh computers. To order a Macintosh Viewsonic® adapter, contact Customer Support. You will need to indicate the serial number of your product.

Show 7 more labels / short text on this page
Operating conditions · Temperature Hygrometry Altitude · Storage conditions · Temperature Hygrometry Altitude · Dimensions Physical (monitor) · Energy saving modes · March Stop
Page 13 of the ViewSonic P95f+ user manual — Troubleshooting
Page 13 · click to enlarge
Page 13

Troubleshooting

  • No power supply
  • Make sure the power switch (or switch) is in a ON position.
  • Make sure the power cable is properly connected to the monitor's back and plugged into a power outlet.
  • Connect another electrical device (e.g. radio) to the power outlet to check that voltage is correct. Monitor energized but no image on screen
  • Make sure that the video cable provided with the monitor is well connected to the video output port located on the back of the computer. If the other end of the video cable is not permanently connected to the monitor, connect it properly.
  • Adjust the brightness and contrast.
  • Check if you need to use an adapter in order to ensure the signal continuity between the graphics card and monitor. Scintilling
  • Insufficient food. Connect the monitor to another power outlet. If you use a parasurcharger, reduce the number of devices connected to it.
  • Make sure that the rate of refreshment (vertical frequency) indicated by ViewMeter in the main menu is equal to or greater than 75 Hz. See "Features" on page 11.
  • Keep away any magnetic elements from your monitor (radios, parasurtensors, unprotected speakers, fluorescent lights, power converters, office fans, etc.).
  • Make sure that your computer's graphics card can use a non-interlaced mode at the desired frequencies. To allow your graphics card to support higher discount frequencies, try selecting less colors or running lower resolutions. Unexpected colors
  • If one of the colours (red, green or blue) is missing, check that the video cable is properly connected. If the cable pins are misinserted or damaged, the connection may be defective.
  • Connect the monitor to another computer.
  • Select the Degauss command from the main menu. N-Do this operation only once.
  • If your graphics card is old, contact ViewSonic ® Customer Support. The whole image moves vertically
  • Make sure that the video input signals are within the specified frequency range of the monitor.
  • Test the monitor with another power source, graphics card or computer system.
  • Connect the video cable correctly. The adjustment buttons do not work
  • Press one button at a time.
Page 14 of the ViewSonic P95f+ user manual — T : (800) 688-6688 F : (909) 468-1202
Page 14 · click to enlarge
Page 14

Customer support

For technical support or product services, see the table below or contact your dealer.

Country / Region Website T = Telephone F = FAX

E-mail

France and other French-speaking countries in Europe

viewsoniceurope.com T(01) 41.47.49.30 F : (01) 41.47.49.10

service.eu@ viewsoniceurope.com

Canada viewsonic.com/ support

T : (800) 688-6688 F : (909) 468-1202

service.ca@ viewsonic.com

Page 15 of the ViewSonic P95f+ user manual — DISCHARGE OF RESPONSIBILITY
Page 15 · click to enlarge
Page 15

Monitor cleaning

  • MAKE SURE THE MONITOR IS OFF.
  • NEVER SPRAY OR POUR LIQUID DIRECTLY ONTO THE MONITOR'S SCREEN AND/OR ENCLOSURE.

To clean the screen, proceed as follows:

1 Wipe the screen with a clean, soft and non-leazy cloth to remove any trace of dust or other particles. 2 If there are still traces, apply a little glass product without ammonia and alcohol to a clean cloth, soft and non-leazy, then wipe the screen.

To clean the housing, proceed as follows:

1 Use a soft, dry cloth. 2 If there are still traces, apply a little ammonia-free, alcohol-free and non-abrasive detergent to a clean cloth, soft and unleashed, then pass it on the surface to be cleaned.

DISCHARGE OF RESPONSIBILITY

ViewSonic strongly recommends against using ammonia or alcohol based cleaning products on the monitor's screen or enclosure. We have been informed that some chemical maintenance products may damage the monitor's screen and/or enclosure. ViewSonic declines any liability for damage caused by the use of ammonia-based maintenance products or alcohol.

Page 16 of the ViewSonic P95f+ user manual — Monitor cleaning
Page 16 · click to enlarge
Page 16

Limited warranty VIEWSONIC CRT MONITOR Warranty Coverage: ViewSonic ensures that its products are free from manufacturing defects or malpractice throughout the warranty period. If a product has material or malpractice defects during that period, ViewSonic shall, at its discretion, repair or replace the product with a similar product. The replacement product or spare parts used for repair may include recycled or rehabilitated components. Duration of the guarantee: Colour monitors ViewSonic® CRT, as well as cathode tubes, are guaranteed for a period of three (3) years for parts and three (3) year for labour from the date of purchase by the original purchaser. Guarantee protection: This guarantee applies only to the first purchaser. Exclusions from the guarantee: 1. Any product on which the serial number has been deleted, modified or removed. 2. Damage, damage or malfunction caused by: a. Accident, misuse, negligence, fire, water damage, lightning

or any other natural disaster, or resulting from unauthorized modification of the product or failure to comply with instructions provided with equipment. b. Repairs or attempts to repair by personnel not approved by the

ViewSonic. c. Any damage caused by the transport. d. A non-compliant movement or installation of the product. e. Any external causes, such as electrical fluctuations or failure of the product

current. f. Use of supplies or parts that do not meet specifications ViewSonic. g. Normal wear. h. Any other cause that cannot be attributed to a product defect. 3. Travel, installation and commissioning costs. Assistance: 1. For information on the service under warranty, please contact ViewSonic Customer Support. You will need to provide the serial number of your product. 2. To qualify for the warranty, you will need to provide (a) your original purchase voucher dated, (b) your name, (c) your address, (d) a description of the problem encountered and (e) serial number of the product. 3. Please bring or send the equipment (paid shipping costs) in its original packaging to your maintenance centre approved by ViewSonic or to ViewSonic. 4. For further information or contact details of the maintenance centre ViewSonic nearest, contact ViewSonic. Limitation of implied guarantees: THERE IS NO GUARANTEE, EXPRESS OR IMPLIED, WHICH GOES BEYOND THE DESCRIPTIONS CONTAINED IN THIS DOCUMENT INCLUDING IMPLICIT WARRANTY OF MARKETING AND ADAPTATION TO A PARTICULAR USE. Exclusion of damage: THE RESPONSIBILITY FOR VIEWSONIC IS LIMITED TO THE COST OF REPAIR OR REPLACEMENT OF THE PRODUCT. THE SOCIETY VIEWSONIC CANNOT BE HELD RESPONSIBLE: 1. DAMAGE CAUSED TO OTHER PROPERTY BY REASON OF A DEFECT IN THE PRODUCT, DAMAGES RESULTING FROM DISCOMFORT, IMPOSSIBILITY OF USING THE PRODUCT OR LOSS OF TIME, PROFITS, COMMERCIAL OPPORTUNITIES OR GOODWILL, IMPACT ON TRADE RELATIONS OR ANY OTHER BUSINESS NUISANCE EVEN IF IT IS WARNED THAT SUCH HARM WILL OCCUR. 2. ANY DIRECT, INDIRECT OR OTHER DAMAGE. 3. ANY COMPLAINT MADE TO THE CUSTOMER BY A THIRD PARTY. Effect of State law: This guarantee grants you specific legal rights, but you can also enjoy other rights that vary according to the legislation of each country. Some countries do not allow limits on implied guarantees and/or do not accept exclusion of direct or indirect damages. As a result, the exclusions outlined above may not apply to you. Sales outside the United States and Canada: For more information on the guarantee and services offered for products ViewSonic sold outside the United States or Canada, please contact ViewSonic or your dealer ViewSonic - I'm fine. Monitor Guarantee ViewSonic CRT (V3.0) Release Date: 03-26-2002

Page 17 of the ViewSonic P95f+ user manual — SJT 18 AWG 16 AWG 14 AWG
Page 17 · click to enlarge
Page 17

Annex Safety instructions

USA UL Canada CSA Germany VDE

Switzerland SEV Great Britain BASE/BS Japan Electric Appliance Control Act

IMPORTANT INFORMATION REGARDING THE CHOICE OF POWER CABLE The power cable for this unit has been supplied and selected according to the country of destination and should be used to avoid any risk of electrocution. Follow the following instructions in case you should replace or if not supplied with original cable. The female plug of the cable shall comply with IEC-60320 and be similar to the illustration below (Figure A1):

Figure A1 Figure A2

For the United States and Canada In the United States and Canada, male catch is NEMA5-15 (Figure A2), UL listed and CSA marked. For units installed on a desk or table, SVT or SJT cables may be used. For ground-based units, only SJT cables can be used. The cable must be selected according to the nominal current for your unit. Please refer to the table below for criteria for selecting power cables used in the United States and Canada.

Cable type Tailus cable conductors Maximum electrical intensity of unit

SJT 18 AWG 16 AWG 14 AWG

10 Amps 12 Amp 12 Aamps

SVT 18 AWG 17 AWG 10 Amps 12 Amps

For European countries In Europe, you must use a cable corresponding to your country's female power outlets. The cable is certified as HAR and a special mark must appear on the outer protective sleeve or insulation of one of the internal conductors. CABLE CONNECTION PRECAUTIONS FOR THE UNITED KINGDOM FOR YOUR SAFETY PLEASE READ THE FOLLOWING TEXT CAREFULLY.

IF THE FITTED MUSTED PLUG IS UNSUITABLE FOR THE SOCKET OUTPUT THEN THE PLUG SHOULD BE CUT OFF AND DISPOSED OF SAFELY.

THERE IS A DANGER OF SEVERAL ELECTRICAL SHOCK IF THE CUT OFF PLUG IS INSERTED INTO AN APPROPRIATE SOCKET.

If a new plug is to be fitted, please observe the wire code as shown below.

If in any doubt, please consult qualified electrician.

Green-and-YellowEarth Blue: Neutral Brown: Live

If the co-ordinated wires of the hands lead of this application do not correspond with the Coloured Markings identifying the terminals in your plug, process as follows: The wireless which is co-bound GREEN-AND-YELLOW must be connected to the terminal in the plug which is marked by the letter E or by the Earth symbol or columned GREEN or GREEN AND YELOW.

The wire which is co-ordinated BLUE must be connected to the terminal in the plug which is marked with the letter N or colored BLACK. The wire which is colored BROWN must be connected to the terminal in the plug which is marked with the letter L or colorred RED. If you have any questions concerning which own power cord to use, please consult with the dealer from whom you have purchased the product.

Page 18 of the ViewSonic P95f+ user manual — Compliance information for the United States
Page 18 · click to enlarge
Page 18

Compliance information for the United States

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reliable protection against aggressive interference in a residential installation. This equipment generators, uses, and can radiate radio frequency energy, and if not installed and used in accordance with the instructions, may cause hormful interference to radio communications. However, there is no guarantee that interference will not occupy in a particular installation. If this equipment does cause aggressive interference to radio or television reception, which can be determined by accounting for the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measurements:

  • Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and receiver.
  • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
  • Consult the dealer or an experienced radio/TV technician for help.

FCC Warning To ensure continued FCC compliance, the user must use grounded power supply cord and the provided shielded video interface cable with bonded ferrite cores. If a BNC cable is going to be used, use only a shielded BNC(5) cable. Also, any unauthorised changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this device.

EC compliance for Europe

This apparatus complies with the requirements of EC Directive 89/336/EEC, as amended by Article 5 of Directives 92/31/EEC and 93/68/EEC on "electromagnetic compatibility" and the requirements in Directive 73/23/EEC, amended by article 13 of Directive 93/68/EC concerning "safety".

Page 19 of the ViewSonic P95f+ user manual — ViewSonic Corporation
Page 19 · click to enlarge
Page 19

ViewSonic Corporation

Sources

References & links

Pages referenced in this manual — manufacturer, support and downloads.

Ask about the ViewSonic P95f+

Owners and our team usually reply within a day — and your question helps the next person too.

Add your email to get notified when it’s answered — no spam, ever.

0 questions
No questions yet about the ViewSonic P95f+

Be the first to ask — other owners or our team will answer.

Original document

ViewSonic P95f+ manual PDF

19 pages·840 KB·Computer Monitor·PDF
Click any page above to open it here
Page 1 / …
100%
Loading pages…