
Guide de l’utilisateur

Guia do usuário
With Plug & Play ✘
19" (18.0" Viewable Diagonal)



Copyright © ViewSonic Corporation, 2002. All rights reserved.
Macintosh and Power Macintosh are registered trademarks of Apple Computer, Inc.
Microsoft, Windows, Windows NT, and the Windows logo are registered trademarks of Microsoft Corporation in the United States and other countries.
ViewSonic, the three birds logo, OnView, ViewMatch, ViewMeter, and PerfectFlat are registered trademarks of ViewSonic Corporation.
VESA is a registered trademark of the Video Electronics Standards Association. DPMS and DDC are trademarks of VESA.
ENERGY STAR® is a registered trademark of the U.S. Environmental Protection Agency (EPA).
As an ENERGY STAR® partner, ViewSonic Corporation has determined that this product meets the ENERGY STAR® guidelines for energy efficiency.
Disclaimer: ViewSonic Corporation shall not be liable for technical or editorial errors or omissions contained herein; nor for incidental or consequential damages resulting from furnishing this material, or the performance or use of this product.
In the interest of continuing product improvement, ViewSonic Corporation reserves the right to change product specifications without notice. Information in this document may change without notice.
No part of this document may be copied, reproduced, or transmitted by any means, for any purpose without prior written permission from ViewSonic Corporation.
To meet your future needs, and to receive any additional product information as it becomes available, please register your product on the Internet at: www.viewsonic.com. The ViewSonic Wizard CD-ROM also provides an opportunity for you to print the registration form, which you may mail or fax to ViewSonic.
ViewSonic A90f+-1 VCDTS23307-2 A-CD-A90f+-1
Product disposal at end of product life ViewSonic is concerned about the preservation of our environment. Please dispose of this product properly at the end of its useful life. Your local waste disposal company may provide information about proper disposal.

Congratulations on your purchase of a ViewSonic® color monitor. Important! Save the original box and all packing material for future shipping needs.

1 Connect power cord Connect the power cord to a properly grounded AC outlet. 2 Connect video cable Make sure both the monitor and computer are turned OFF. Connect the video cable to the computer.
(2) Wait for the CD-ROM to auto-start. NOTE: If the CD-ROM does not auto-start: double-click on the CD-ROM icon in Windows Explorer, then double-click on viewsonic.exe. (3) Follow the on-screen instructions. 5 Windows users: Set the Timing Mode (resolution and refresh rate) Example: 1024 X 768 @ 75 Hz. For instructions on changing the resolution and refresh rate, see the graphic card’s user guide. Installation is complete. Enjoy your new ViewSonic color monitor. To be best prepared for any future customer service needs: print this user guide and write the serial number in “For Your Records” on page 2. (See back of monitor.) To register your product go online to www.viewsonic.com. The ViewSonic Wizard CD-ROM also provides an opportunity for you to print the registration form which you may mail or fax to ViewSonic.
Macintosh® users: Models older than G3 require a Macintosh adapter. Attach the adapter to the computer and plug the video cable into the adapter.
To order a ViewSonic® Macintosh adapter, contact ViewSonic. See “Customer Support” on page 13. 3 Turn ON monitor and computer Turn ON the monitor, then turn ON the computer. This sequence (monitor before computer) is very important. NOTE: At this point Windows users may receive a message asking them to install the INF file. 4 Install Display Optimization files (INF and ICM files) (1) Insert the ViewSonic Wizard CD-ROM into your computer’s CD-ROM drive. NOTE: If your computer does not have a CD-ROM drive, see “Cutomer Support” on page 13.

Power cord to monitor
Video cable from monitor to computer
Power cord to computer

Setting the Timing Mode
Setting the timing mode is important for maximizing the quality of the screen image and minimizing eye strain. The timing mode consists of the resolution (example 1024 x 768) and refresh rate (or vertical frequency; example 75 Hz). After setting the timing mode, use the OnView® controls to adjust the screen image.
For the best picture quality set your monitor timing mode to: VESA 1280 x 1024 @ 75 Hz.
To set the Resolution:
1 Right-click on the Windows desktop. 2 Click Properties on the drop-down menu. 3 Click the Settings tab. 4 Move the slider pointer which displays in the Desktop area or Screen area in the window.
You have the option of using the OSD Lock feature to prevent current image adjustments from being changed.

Use the buttons on the front control panel to display and adjust the OnView® controls which display on the screen. The OnView controls are explained at the top of the next page and are defined in “Main Menu Controls” on page 8.

Main Menu With OnView controls Main Menu
Switches between Normal and UltraBrite modes. "NORMAL: TEXT/SPREADSHEET": When selected, this brightness level setting
displays a standard CRT brightness of 120 nits for text and spreadsheet applications.
Displays the highlighted option or toggles between options
displays up to 300 nits of brightness for optimum display performance of grapics and video applications and games.
One Touch Auto Adjust
Automatically adjusts horizontal and vertical size and position of the screen image.

Displays the Main Menu or exits and saves
Scrolls through options or adjusts settings
Front Control Panel · Power button

1 To display the Main Menu, press button [1].

2 To select a control you want to adjust, press the arrow buttons on the front control panel of your monitor and scroll through the choices. When the control you want is highlighted, press button [2].
3 To adjust the selected control, such as CONTRAST in the sample below, press the arrow buttons.
4 To save the control setting and Exit the menu press button [1] twice.

Adjust the menu items shown below by using the up and down buttons.
Contrast adjusts the difference between the image background (black level) and the foreground (white level).
Brightness adjusts the background black level of the screen image.
H. Size (Horizontal Size) adjusts width of the screen image.
H. Position (Horizontal Position) moves the screen image left or right.
V. Size (Vertical Size) adjusts the height of the screen image.
V. Position (Vertical Position) moves the screen image up or down.
Zoom expands and contracts the entire screen image.
Pincushion curves the vertical edges of the screen image.
Pin Balance curves the vertical edges of the screen image to the left or right.

Trapezoid adjusts the top and bottom of the screen image until they have equal width.
Parallelogram slants the vertical edges of the screen image until they are parallel.
Rotation rotates the entire screen image.
Degauss removes the build-up of magnetic fields that can cause irregular colors to appear around the edges of screen images. There are two ways to degauss the display: automatically by turning the monitor on, or manually by selecting the DEGAUSS control from the menu. To degauss the monitor manually, select DEGAUSS from the menu and press button [2]. Important: Do not degauss repeatedly. Doing so can be harmful to the display. Wait at least 20 minutes before selecting this control again.
ViewMatch® Color provides several color options: three preset color temperatures and User Color. The factory setting for this product is 9300K (9300° Kelvin). 9300K — Adds blue to the screen image for cooler white (used in most office settings with fluorescent lighting). 6500K — Adds red to the screen image for warmer white and richer red. 5000K — Adds blue and green to the screen image for a darker color. User Color — Individual adjustments for red and blue (green is fixed).
OSD Position (On Screen Display) allows you to move the menus and control screens.
Moire Reduction reduces interference patterns that appear as ripples, waves, or unwanted background color textures. Interference patterns of this type are most noticeable when viewing images having closely spaced lines or finely detailed patterns.
Language allows you to choose from among several languages for the menus and control screens: English, French, German, Italian, and Spanish.

Memory Recall returns adjustments to the original factory settings if the display is operating in a factory preset timing mode listed in this user guide. Exception: This control does not affect changes made with the User Color control.
ViewMeter® displays information regarding the current input signal coming from the graphics card of the computer.

Specifications
Full 19” (18.0” viewable diagonal area), 0.21 mm Horizontal, 0.14 mm Vertical, and 0.25 mm diagonal dot pitch, 90° deflection
RGB P22 medium/short persistence TM = 52.6%, anti-static, anti-reflection
Input Signal Video Sync
RGB Analog (0.7Vp-p, 75 Ohms) fH: 30-86 kHz, fv: 50-150 Hz HV Separate (TTL), Composite Sync
Compatibility PC Macintosh1
VGA up to 1600 x 1200 Power Macintosh® G3, G4 (from 640 x 480 to 1024 x 768; may require Macintosh cable adapter)
Resolution Recommended and supported
1600 x 1200 @ 60 Hz (VESA) 1280 x 1024 @ 75 Hz (VESA) 1024 x 768 @ 60, 75, 85 Hz (VESA) 800 x 600 @ 75, 85 Hz (VGA) 640 x 480 @ 60 Hz (VGA) 640 x 400 @ 70 Hz (VGA) 640 x 480 @ 67 Hz (Mac) 832 x 624 @ 75 Hz (Mac) 1024 x 768 @ 74.9 Hz (Mac)
Power Voltage AC 100-240 V 50/60 (+/- 3)Hz
Display Area Default Full scan
352 mm (H) x 264 mm (V) (typical) 360 mm (H) x 270 mm (V) (depends on signal timing)
+32° F to +104° F (+0° C to +40° C) 5% to 95% (no condensation) To 9,000 feet
-40° F to +140° F (-40° C to +60° C) 5% to 95% (no condensation) To 39,000 feet
463.5 mm (W) x 491.5 mm (H) x 470 mm (D) 18.2” (W) x 19.4” (H) x 18.6” (D)
Weight Net (monitor only) 22 kg (48.5 lb)
Regulations UL/cUL, FCC-B, DHHS, ICES-003, EPA-Energy Star, CB, MPR-II
< 110 W maximum (Green LED) < 3 W (Orange LED)
1Macintosh models prior to G3 require a Macintosh adapter. To order a ViewSonic Macintosh adapter, contact Customer Support. You will need to provide the product serial number.


For technical support or product service, see the table below or contact your reseller.
Web site T = Telephone F = FAX
viewsonic.com/ support
viewsonic.com/ support
service.ca@ viewsonic.com
service.eu@ viewsoniceurope.com
Europe, Middle East, Baltic countries, and North Africa
viewsoniceurope.com Contact your reseller
service.eu@ viewsoniceurope.com
Australia and New Zealand
service.au@ viewsonic.com
Singapore/India and Southeast Asia
service.sg@ viewsonic.com
service.ap@ viewsonic.com
service.ap@ viewsonic.com
United States · Canada · Other Asia/Pacific countries

1 Wipe the screen with a clean, soft, lint-free cloth. This removes dust and other particles. 2 If still not clean, apply a small amount of non-ammonia, non-alcohol based glass cleaner onto a clean, soft, lint-free cloth, and wipe the screen.
1 Use a soft, dry cloth. 2 If still not clean, apply a small amount of a non-ammonia, non-alcohol based, mild non-abrasive detergent onto a clean, soft, lint-free cloth, then wipe the surface.
ViewSonic® does not recommend the use of any ammonia or alcohol-based cleaners on the monitor screen or case. Some chemical cleaners have been reported to damage the screen and/or case of the monitor. ViewSonic will not be liable for damage resulting from use of any ammonia or alcohol-based cleaners.

What the warranty covers: ViewSonic warrants its products to be free from defects in material and workmanship during the warranty period. If a product proves to be defective in material or workmanship during the warranty period, ViewSonic will, at its sole option, repair or replace the product with a like product. Replacement product or parts may include remanufactured or refurbished parts or components.
How long the warranty is effective:
ViewSonic® color CRT monitors, including the display tubes, are warranted for three (3) years for all parts and three (3) years for all labor from the date of the first consumer purchase.
Who the warranty protects: This warranty is valid only for the first consumer purchaser.
What the warranty does not cover: 1. Any product on which the serial number has been defaced, modified or removed. 2. Damage, deterioration or malfunction resulting from: a. Accident, misuse, neglect, fire, water, lightning, or other acts of nature, unauthorized product
modification, or failure to follow instructions supplied with the product. b. Repair or attempted repair by anyone not authorized by ViewSonic. c. Any damage of the product due to shipment. d. Removal or installation of the product. e. Causes external to the product, such as electrical power fluctuations or failure. f. Use of supplies or parts not meeting ViewSonic’s specifications. g. Normal wear and tear. h. Any other cause which does not relate to a product defect. 3. Removal, installation, and set-up service charges.
How to get service: 1. For information about receiving service under warranty, contact ViewSonic Customer Support. You will need to provide your product's serial number. 2. To obtain service under warranty, you will be required to provide (a) the original dated sales slip, (b) your name, (c) your address, (d) a description of the problem, and (e) the serial number of the product. 3. Take or ship the product freight prepaid in the original container to an authorized ViewSonic service center or ViewSonic. 4. For additional information or the name of the nearest ViewSonic service center, contact ViewSonic.
Limitation of implied warranties: THERE ARE NO WARRANTIES, EXPRESS OR IMPLIED, WHICH EXTEND BEYOND THE DESCRIPTION CONTAINED HEREIN INCLUDING THE IMPLIED WARRANTY OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.
Exclusion of damages: VIEWSONIC'S LIABILITY IS LIMITED TO THE COST OF REPAIR OR REPLACEMENT OF THE PRODUCT. VIEWSONIC SHALL NOT BE LIABLE FOR: 1. DAMAGE TO OTHER PROPERTY CAUSED BY ANY DEFECTS IN THE PRODUCT, DAMAGES BASED UPON INCONVENIENCE, LOSS OF USE OF THE PRODUCT, LOSS OF TIME, LOSS OF PROFITS, LOSS OF BUSINESS OPPORTUNITY, LOSS OF GOODWILL, INTERFERENCE WITH BUSINESS RELATIONSHIPS, OR OTHER COMMERCIAL LOSS, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. 2. ANY OTHER DAMAGES, WHETHER INCIDENTAL, CONSEQUENTIAL OR OTHERWISE. 3. ANY CLAIM AGAINST THE CUSTOMER BY ANY OTHER PARTY. Effect of state law: This warranty gives you specific legal rights, and you may also have other rights which vary from state to state. Some states do not allow limitations on implied warranties and/or do not allow the exclusion of incidental or consequential damages, so the above limitations and exclusions may not apply to you.
Sales outside the U.S.A. and Canada: For warranty information and service on ViewSonic products sold outside of the U.S.A. and Canada, contact ViewSonic or your local ViewSonic dealer.
ViewSonic CRT Monitor Warranty (V3.0) Release Date: 03-26-2002

IMPORTANT NOTICE CONCERNING POWER CORD SELECTION The power cord set for this unit has been enclosed and has been selected according to the country of destination and must be used to prevent electric shock. Use the following guidelines if it is necessary to replace the original cord set, or if the cord set is not enclosed. The female receptacle of the cord set must meet IEC-60320 requirements and may look like (Figure A1 below):
Figure A1 Figure A2
For the United States and Canada In the United States and Canada the male plug is a NEMA5-15 style (Figure A2), UL Listed, and CSA Labeled. For units which are mounted on a desk or table, type SVT or SJT cord sets may be used. For units which sit on the floor, only SJT type cord sets may be used. The cord set must be selected according to the current rating for your unit. Please consult the table below for the selection criteria for power cords used in the United States and Canada.
10 Amps 12 Amps 12 Amps
SVT 18 AWG 17 AWG 10 Amps 12 Amps
For European Countries In Europe you must use a cord set which is appropriate for the receptacles in your country. The cord set is HAR- Certified, and a special mark that will appear on the outer sheath, or on the insulation of one of the inner conductors. AC PLUG CORD PRECAUTIONS FOR THE UNITED KINGDOM FOR YOUR SAFETY PLEASE READ THE FOLLOWING TEXT CAREFULLY. IF THE FITTED MOULDED PLUG IS UNSUITABLE FOR THE SOCKET OUTLET THEN THE PLUG SHOULD BE CUT OFF AND DISPOSED OF SAFELY. THERE IS A DANGER OF SEVERE ELECTRICAL SHOCK IF THE CUT OFF PLUG IS INSERTED INTO AN APPROPRIATE SOCKET. If a new plug is to be fitted, please observe the wiring code as shown below. If in any doubt, please consult a qualified electrician.
Green-and-Yellow: Earth Blue: Neutral Brown: Live If the coloured wires of the mains lead of this appliance do not correspond with the coloured markings identifying the terminals in your plug, proceed as follows: The wire which is coloured GREEN-AND-YELLOW must be connected to the terminal in the plug which is marked by the letter E or by the Earth symbol or coloured GREEN or GREEN-AND-YELLOW. The wire which is coloured BLUE must be connected to the terminal in the plug which is marked with the letter N or coloured BLACK. The wire which is coloured BROWN must be connected to the terminal in the plug which is marked with the letter L or coloured RED. If you have any questions concerning which proper power cord to use, please consult with the dealer from whom you have purchased the product.

Compliance Information for U.S.A.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy, and if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
FCC Warning To assure continued FCC compliance, the user must use grounded power supply cord and the provided shielded video interface cable with bonded ferrite cores. If a BNC cable is going to be used, use only a shielded BNC(5) cable. Also, any unauthorized changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this device.
The device complies with the requirements of the EEC directive 89/336/EEC as amended by 92/31/EEC and 93/68/EEC Art.5 with regard to “Electromagnetic compatibility”, and 73/ 23/EEC as amended by 93/68/EEC Art.13 with regard to “Safety.”

Pages referenced in this manual — manufacturer, support and downloads.
Owners and our team usually reply within a day — and your question helps the next person too.
Be the first to ask — other owners or our team will answer.