EN
ViewSonic logo
Official user manual

ViewSonic Graphics Series Monitor (A91f+)

19 pages·625 KB·Computer Monitor·PDF·ENDEFRITNLJA
ViewSonic Graphics Series Monitor (A91f+)
Table of Contents 40 sections Color Monitor A91f+ · User Guide · Guide de l’utilisateur · Bedienungsanleitung · … ShowHide
Page 1 of the ViewSonic Graphics Series Monitor (A91f+) user manual — Guía del usuario
Page 1 · click to enlarge
Page 1

Color Monitor A91f+

User Guide

Guide de l’utilisateur

Bedienungsanleitung

ViewSonic Graphics Series Monitor (A91f+) — User Guide diagram (page 1)
Fig. 1 · User Guide

Guía del usuario

Guida dell'utente

With Plug & Play ✘

19" (18.0" Viewable Diagonal)

Page 2 of the ViewSonic Graphics Series Monitor (A91f+) user manual — Compliance Information
Page 2 · click to enlarge
Page 2

Compliance Information

For U.S.A. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy, and if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

  • Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and receiver.
  • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
  • Consult the dealer or an experienced radio/TV technician for help.

FCC Warning To assure continued FCC compliance, the user must use grounded power supply cord and the cables which are included with the equipment or specifi ed. Also, any unauthorized changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate this device.

For Canada This Class B digital apparatus meets all requirements of the Canadian Interference-Causing Equipment Regulations. Cet appareil numeique de la Classe B repecte toutes les exigences du Reglement sur le materiel brouilleur du Canada.

CE Conformity for European Countries

The device complies with the requirements of the EEC directive 89/336/EEC as amended by 92/31/EEC and 93/68/EEC Art.5 with regard to “Electromagnetic compatibility,” and 73/23/EEC as amended by 93/68/EEC Art.13 with regard to “Safety.”

User Information for all Countries Notice: Use the cables which are included with the unit or specifi ed.

CE Conformity

Page 3 of the ViewSonic Graphics Series Monitor (A91f+) user manual — Important Safety Instructions
Page 3 · click to enlarge
Page 3

Important Safety Instructions

1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use this unit near water.
6. Clean only with dry cloth.
7. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.
8. Do not install near any heat sources such as radiators, heat registers, stoves, or other devices (including amplifi ers) that produce heat.
9. Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.
10. Protect the power cord from being walked on or pinched particularly at plugs. Convenience receptacles and the point where they exit from the unit. Be sure that the power outlet is located near the unit so that it is easily accessible.
11. Only use attachments/accessories specifi ed by the manufacturer.
12. Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the unit. When a cart is used, use caution when moving the cart/unit combination to avoid injury from tip-over
13. Unplug this unit when unused for long periods of time.
14. Refer all servicing to qualifi ed service personnel. Servicing is required when the unit has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the unit, the unit has been exposed to rain or moisture, does not operate normally, or has been dropped.
Page 4 of the ViewSonic Graphics Series Monitor (A91f+) user manual — Important Safety Instructions
Page 4 · click to enlarge
Page 4
Page 4 of the ViewSonic Graphics Series Monitor (A91f+) user manual — Important Safety Instructions
Page 5 of the ViewSonic Graphics Series Monitor (A91f+) user manual — For Your Records
Page 5 · click to enlarge
Page 5

Copyright© ViewSonic Corporation, 2004. All rights reserved.

Macintosh and Power Macintosh are registered trademarks of Apple Computer, Inc.

Microsoft, Windows, Windows NT, and the Windows logo are registered trademarks of Microsoft Corporation in the United States and other countries.

ViewSonic, the three birds logo, OnView, ViewMatch, and ViewMeter are registered trademarks of ViewSonic Corporation.

VESA is a registered trademark of the Video Electronics Standards Association. DPMS and DDC are trademarks of VESA.

Disclaimer: ViewSonic Corporation shall not be liable for technical or editorial errors or omissions contained herein; nor for incidental or consequential damages resulting from furnishing this material, or the performance or use of this product.

In the interest of continuing product improvement, ViewSonic Corporation reserves the right to change product specifications without notice. Information in this document may change without notice.

No part of this document may be copied, reproduced, or transmitted by any means, for any purpose without prior written permission from ViewSonic Corporation.

Product Registration To meet your future needs, and to receive any additional product information as it becomes available, please register your product on the Internet at: www.viewsonic.com The ViewSonic® Wizard CD-ROM also provides an opportunity for you to print the registration form, which you may mail or fax to ViewSonic.

For Your Records

Product Name:

A91f+ ViewSonic 19” Color Monitor VCDTS23283-1 A91f+-1_UG_ENG Rev. 1B 12-08-04

Model NumberDocument Number: Serial Number: Purchase Date:

Product disposal at end of product life ViewSonic is concerned about the preservation of our environment. Please dispose of this product properly at the end of its useful life. For TCO’03 recycling information, please refer to our website:

3. Taiwan: recycle.epa.gov.tw
Page 6 of the ViewSonic Graphics Series Monitor (A91f+) user manual — Precautions
Page 6 · click to enlarge
Page 6

Getting Started

Congratulations on your purchase of a ViewSonic® color monitor. Important! Save the original box and all packing material for future shipping needs.

Package Contents

  • Your package includes:
  • Color monitor
  • DB-15 video cable (attached)
  • Power cord
  • ViewSonic Wizard CD-ROM

Precautions

  • For best viewing conditions sit at least 18" from the monitor.
  • AVOID TOUCHING THE SCREEN WITH YOUR FINGERS. Oils from the skin are difficult to remove.
  • NEVER REMOVE THE REAR COVER. The monitor contains high voltage parts. You may suffer serious injury if you touch these parts.
  • Avoid exposing the monitor to direct sunlight or another heat source, including an open flame. The monitor should be facing away from direct sunlight to reduce glare.
  • Always handle your monitor with care when moving it.
  • Place your monitor in a well ventilated area. Do not place anything on the monitor that prevents adequate dissipation of heat.
  • Ensure the area around the monitor is clean and free of moisture.
  • Keep the monitor away from magnets, motors, transformers, speakers, and televisions.
  • Do not place heavy objects on the monitor, video cable, or power cord.
  • If smoke, abnormal noise, or strange odor is present, immediately switch the monitor off and call your dealer or ViewSonic. It is dangerous to continue using the monitor.
Page 7 of the ViewSonic Graphics Series Monitor (A91f+) user manual — Quick Installation
Page 7 · click to enlarge
Page 7

Quick Installation

1 Connect power cord Connect the power cord to a properly grounded AC outlet. 2 Connect video cable Make sure both the monitor and computer are turned OFF. • Connect the video cable to the computer. Macintosh® users: Models older than G3 require a Macintosh adapter. Attach the adapter to the computer and plug the video cable into the adapter.

(2) Wait for the CD-ROM to auto-start. NOTE: If the CD-ROM does not auto-start: double-click on the CD-ROM icon in Windows Explorer, then double-click on viewsonic.exe. (3) Follow the on-screen instructions. 5 Windows users: Set the Timing Mode (resolution and refresh rate) Example: 1280 X 1024 @ 75Hz. For instructions on changing the resolution and refresh rate, see the graphic card’s user guide. Installation is complete. Enjoy your new ViewSonic color monitor. To be best prepared for any future customer service needs: print this user guide and write the serial number in “For Your Records” on page 2. (See back of monitor.) To register your product go online to www.viewsonic.com. The ViewSonic Wizard CD-ROM also provides an opportunity for you to print the registration form which you may mail or fax to ViewSonic.

To order a ViewSonic® Macintosh adapter, contact ViewSonic. See “Customer Support” on page 13. 3 Turn ON monitor and computer Turn ON the monitor, then turn ON the computer. This sequence (monitor before computer) is very important. NOTE: At this point Windows users may receive a message asking them to install the INF file. 4 Install Display Optimization files (INF and ICM files) (1) Insert the ViewSonic Wizard CD-ROM into your computer’s CD-ROM drive. NOTE: If your computer does not have a CD-ROM drive, see “Customer Support” on page 13.

ViewSonic Graphics Series Monitor (A91f+) — Quick Installation diagram (page 7)
Fig. 2 · Quick Installation
Show 4 more labels / short text on this page
(Continued) · Power cord · AC wall outlet · Video cable
Page 8 of the ViewSonic Graphics Series Monitor (A91f+) user manual — OSD Lock Settings
Page 8 · click to enlarge
Page 8

Using the Monitor

Setting the Timing Mode

Setting the timing mode is important for maximizing the quality of the screen image and minimizing eye strain. The timing mode consists of the resolution (example 1280 x 1024) and refresh rate (or vertical frequency; example 75 Hz). After setting the timing mode, use the OnView® controls to adjust the screen image.

For the best picture quality set your monitor timing mode to: VESA 1280 x 1024 @ 75 Hz.

To set the Resolution:

1 Right-click on the Windows desktop. 2 Click Properties on the drop-down menu. 3 Click the Settings tab. 4 Move the slider pointer which displays in the Desktop area or Screen area in the window.

OSD Lock Settings

You have the option of using the On Screen Display (OSD) locking feature, OSD LOCK, to prevent unwanted changes to the current image settings.

  • OSD Lock: Press and hold the [1] and [ ▼ ] buttons on the face of the monitor for 5 seconds. The message “OSD LOCK” will then display briefly, indicating that the OSD image settings are now locked.
  • OSD Unlock: Press and hold the [1] and [ ▼ ] buttons again for 5 seconds. The message “OSD UNLOCK” will then display briefly, indicating that the OSD image settings are now unlocked.
Page 9 of the ViewSonic Graphics Series Monitor (A91f+) user manual — Adjusting the Screen Image
Page 9 · click to enlarge
Page 9

Adjusting the Screen Image

Use the buttons on the front control panel to display and adjust the OnView® controls which display on the screen. The OnView controls are explained at the top of the next page and are defined in “Main Menu Controls” on page 8.

ViewSonic Graphics Series Monitor (A91f+) — Adjusting the Screen Image diagram (page 9)
Fig. 3 · Adjusting the Screen Image

Main Menu With OnView controls

Switches between Normal, UltraBrite 3x and UltraBrite 5x modes.

"NORMAL: TEXT/SPREADSHEET": When selected, this brightness level setting display a standard CRT brightness of 120 nits for next and spreadsheet applications.

"ULTRABRITE 3x: GRAPHICS/GAME": When selected, this UltraBrite™ setting displays up to 260 nits of brightness for optimum display performance of graphics applications and games .

"ULTRABRITE 5x: VIDEO/MOVIE/DVD": When selected, this UltraBrite™ setting displays up to 450 nits of brightness for optimized display performance of video applications.

Displays the highlighted option or toggles between options

ViewSonic Graphics Series Monitor (A91f+) — Adjusting the Screen Image diagram (page 9)
Fig. 4 · Adjusting the Screen Image

Displays the Main Menu or exits and saves

Scrolls through options or adjusts settings

Power lightgreen = on orange = power save
Show 4 more labels / short text on this page
Front Control Panel · Power button · ViewSonic 6 · A91f+
Page 10 of the ViewSonic Graphics Series Monitor (A91f+) user manual —
Page 10 · click to enlarge
Page 10

Do the following to adjust the screen image:

1 To display the Main Menu, press button [1].

ViewSonic Graphics Series Monitor (A91f+) — Do the following to adjust the screen image: diagram (page 10)
Fig. 5 · Do the following to adjust the screen image:
ViewSonic Graphics Series Monitor (A91f+) — Do the following to adjust the screen image: diagram (page 10)
Fig. 6 · Do the following to adjust the screen image:

2 To select a control you want to adjust, press the arrow buttons on the front control panel of your monitor and scroll through the choices. When the control you want is highlighted, press button [2].

3 To adjust the selected control, such as CONTRAST in the sample below, press the arrow buttons.

ViewSonic Graphics Series Monitor (A91f+) — Do the following to adjust the screen image: diagram (page 10)
Fig. 7 · Do the following to adjust the screen image:

4 To save the control setting and Exit the menu press button [1] twice.

ViewSonic 7 · A91f+

Page 11 of the ViewSonic Graphics Series Monitor (A91f+) user manual — Control Explanation
Page 11 · click to enlarge
Page 11

Main Menu Controls

Adjust the menu items shown below by using the up and down buttons.

Control Explanation

Contrast adjusts the difference between the image background (black level) and the foreground (white level).

Brightness adjusts the background black level of the screen image.

Horizontal Size adjusts width of the screen image.

Horizontal Position moves the screen image left or right.

Vertical Size adjusts the height of the screen image.

Vertical Position moves the screen image up or down.

Zoom expands and contracts the entire screen image.

Pincushion curves the vertical sides of the screen image.

Pin Balance curves the vertical edges of the screen image to the left or right.

Trapezoid adjusts the top and bottom of the screen image until they have equal length.

Parallel slants the vertical edges of the screen image until they are parallel.

Top Hook adjusts the top corners of the screen image.

Bottom Hook adjusts the bottom corners of the screen image.

Page 12 of the ViewSonic Graphics Series Monitor (A91f+) user manual — Control Explanation
Page 12 · click to enlarge
Page 12

Control Explanation

Tilt rotates the entire screen image.

Degauss removes the build-up of magnetic fields that can cause irregular colors to appear around the edges of screen images. There are two ways to degauss the display: automatically by turning the monitor on, or manually by selecting the Degauss control from the menu. With Degauss selected from the menu, press button [2] to degauss the monitor manually. Important: Do not degauss repeatedly. Doing so can be harmful to the display. Wait at least 20 minutes before selecting this control again.

V. Moire (Vertical Moire) reduces horizontal interference patterns that appear as ripples, waves, or unwanted background color textures. Interference patterns of this type are most noticeable when viewing images having closely spaced lines or finely detailed patterns.

H. Moire (Horizontal Moire) reduces vertical interference patterns that appear as ripples, waves, or unwanted background color textures. Interference patterns of this type are most noticeable when viewing images having closely spaced lines or finely detailed patterns.

ViewMatch Color provides several color options: several preset color temperatures and User Color which allows you to adjust red (R), green (G), and blue (B). The factory setting for this product is 9300K (9300°Kelvin).

9300K — Adds blue to the screen image for cooler white (used in most office settings with fluorescent lighting).

6500K — Adds red to the screen image for warmer white and richer red.

5000K — Adds blue and green to the screen image for a darker color.

User Color — Individual adjustments for red, green, and blue.

Page 13 of the ViewSonic Graphics Series Monitor (A91f+) user manual — Control Explanation
Page 13 · click to enlarge
Page 13

Control Explanation

Input Level displays the voltage level of the video signal. NOTE: the default selection is 0.7V.

Language allows you to choose from among several languages for the menus and control screens: English, French, German, Italian, Spanish, Traditional Chinese, Simplified Chinese, and Japanese.

OSD Position allows you to move the on-screen display menus and control screens.

ViewMeter® displays the frequencies (horizontal and vertical) coming from the graphics card of the computer.

Memory Recall returns adjustments to the original factory settings if the display is operating in a factory preset timing mode listed in this user guide. Exception: This control does not affect changes made with the User Color control.

of the screen image. Auto Adjust automatically adjusts horizontal and vertical size

ViewSonic 10 · A91f+

Page 14 of the ViewSonic Graphics Series Monitor (A91f+) user manual — Other Information
Page 14 · click to enlarge
Page 14

Other Information

Specifications

CRT Type Dot Pitch Phosphor Glass surface

19" (18.0" viewable diagonal area), 90o deflection, 0.25 mm dot pitch, RGB medium/short persistence P22 TM~52.6%, anti-reflection and anti-static

Input Signal Video Sync

RGB Analog (0.7/1.0Vp-p, 75 Ohms fH: 30-86 kHz, fv: 50-180 Hz H/V Separate (TTL), Composite

Compatibility PC Macintosh1

VGA up to 1792 x 1344 Power Macintosh compatible from 640 x 480 to 1152 x 870 (may require Macintosh cable adapter)

Resolution Recommended and supported

1600 x 1200 @ 60 Hz (VESA) 1280 x 1024 @ 75 Hz (VESA) 1024 x 768 @ 75, 85 Hz (VESA) 800 x 600 @ 75, 85 Hz (VESA)

640 x 480 @ 75, 85 Hz (VESA)

640 x 480 @ 60 Hz (VGA) 640 x 400 @ 70 Hz (VGA) 832 x 624 @ 75 Hz (Mac) 1024 x 768 @ 74.9 Hz (Mac)

1152 x 870 @ 75 Hz (Mac)

Power Voltage AC 100-240 VAC 50/60 (+/- 3) Hz

352 mm (H) x 264 mm (V) (typical) 360 mm (H) x 270 mm (V) (depends on signal timing)

Display Area Default Full scan

+32° F to +104° F (0° C to +40° C) 5% to 95% (no condensation) To 9,000 feet

-40° F to +140° F (-40° C to +60° C) 5% to 95% (no condensation) To 39,000 feet

445 mm (W) x 456 mm (H) x 456 mm (D) 17.52" (W) x 17.95" (H) x 17.95" (D)

19.2 kg (42.24 lb) (monitor only)

Regulations MPR II, Tuv-S, UL/cUL, FCC-B, DHHS, ICES-Class B, NOM

< 110W TYPICAL (Green LED) < 3W (Orange LED)

1Macintosh models prior to G3 require a Macintosh adapter. To order a ViewSonic® Macintosh adapter, contact Customer Support. You will need to provide the product serial number.

Show 10 more labels / short text on this page
Operating Conditions · Temperature Humidity Altitude · Storage Conditions · Temperature Humidity Altitude · Dimensions Physical (monitor) · Weight Net · Power Saving Modes · On Off · ViewSonic 11 · A91f+
Page 15 of the ViewSonic Graphics Series Monitor (A91f+) user manual — Control buttons do not work
Page 15 · click to enlarge
Page 15

Troubleshooting

No power

  • Make sure power button (or switch) is ON.
  • Make sure A/C power cord is securely connected to the back of the monitor and to a power outlet.
  • Plug another electrical device (like a radio) into the power outlet to verify that the outlet is supplying proper voltage.

Power is ON but no screen image • Make sure the video cable supplied with the monitor is tightly secured to the video output port on the back of the computer. If the other end of the video cable is not attached permanently to the monitor, tightly secure it to the monitor.

  • Adjust brightness and contrast.
  • Verify whether an adapter is required for proper signal continuity between graphics card and monitor.

Flickering • Not enough power supplied. Connect the monitor to a different outlet. If using a surge protector, reduce the number of devices plugged in.

  • Check the ViewMeter from the main menu to verify the refresh rate (vertical frequency) is 75 Hz or higher. See “Specifications” on page 11.
  • Remove any devices from the area around the monitor that emit magnetic fields such as radios, surge protectors, unshielded speakers, fluorescent lights, AC power converters, desk fans, etc.
  • Make sure the graphics card in your computer can use non-interlaced mode at the desired frequencies. To enable your graphics card to support higher refresh rates, try selecting fewer colors or running lower resolutions.

Wrong or abnormal colors • If any colors (red, green, or blue) are missing, check the video cable to make sure it is securely connected. Loose or broken pins in the cable connector could cause an improper connection.

  • Connect the monitor to another computer.
  • Select Degauss from the Main Menu. Do this only once.
  • If you have an older graphics card, contact ViewSonic ® Customer Support.

Entire screen image rolls vertically

  • Make sure video input signals are within the monitor's specified frequency range.
  • Try the monitor with another power source, graphics card, or computer system.
  • Connect the video cable securely.

Control buttons do not work

  • Press only one button at a time.
Page 16 of the ViewSonic Graphics Series Monitor (A91f+) user manual — T: 65 273 4018 F: 65 273 1566
Page 16 · click to enlarge
Page 16

Customer Support

For technical support or product service, see the table below or contact your reseller.

Country/ Region

Web site T = Telephone F = FAX

Email

www.viewsonic.com/

T: (800) 688-6688 F: (909) 468-1202

service.us@ viewsonic.com

www.viewsonic.com/

T: (800) 688-6688 F: (909) 468-1202

service.ca@ viewsonic.com

United Kingdom T0800 833 648 F: (01293) 643910

www.viewsoniceurope.com

service.eu@ viewsoniceurope.com

Europe, Middle East, Baltic countries, and North Africa

www.viewsoniceurope.com

service.eu@ viewsoniceurope.com

Australia and New Zealand

www.viewsonic.com.au

T: +61 2 9906 6277 F: +61 2 9906 6377

service@au. viewsonic.com

www.viewsonic.com.sg

T: 65 273 4018 F: 65 273 1566

service@sg. viewsonic.com

South Africa/ Other countries

www.viewsonic.com

T: 886 2 2246 3456 F: 886 2 8242 3668

service@sd. viewsonic.com

Hong Kong www.hk.viewsonic.com service@hk.

T: 886 2 2246 3456 F: 886 2 8242 3668 viewsonic.com

Show 6 more labels / short text on this page
United States · support · Canada · support · Contact your reseller · Singapore/ Malaysia/Thailand
Page 17 of the ViewSonic Graphics Series Monitor (A91f+) user manual — DISCLAIMER
Page 17 · click to enlarge
Page 17

Cleaning the Monitor

  • MAKE SURE THE MONITOR IS TURNED OFF.
  • NEVER SPRAY OR POUR ANY LIQUID DIRECTLY ONTO THE SCREEN OR CASE.

To clean the screen:

1 Wipe the screen with a clean, soft, lint-free cloth. This removes dust and other particles. 2 If still not clean, apply a small amount of non-ammonia, non-alcohol based glass cleaner onto a clean, soft, lint-free cloth, and wipe the screen.

To clean the case:

1 Use a soft, dry cloth. 2 If still not clean, apply a small amount of a non-ammonia, non-alcohol based, mild non-abrasive detergent onto a clean, soft, lint-free cloth, then wipe the surface.

DISCLAIMER

ViewSonic does not recommend the use of any ammonia or alcohol-based cleaners on the monitor screen or case. Some chemical cleaners have been reported to damage the screen and/or case of the monitor. ViewSonic will not be liable for damage resulting from use of any ammonia or alcohol-based cleaners.

Page 18 of the ViewSonic Graphics Series Monitor (A91f+) user manual — Limited Warranty VIEWSONIC CRT MONITORS
Page 18 · click to enlarge
Page 18

Limited Warranty VIEWSONIC CRT MONITORS

What the warranty covers: ViewSonic warrants its products to be free from defects in material and workmanship during the warranty period. If a product proves to be defective in material or workmanship during the warranty period, ViewSonic will, at its sole option, repair or replace the product with a like product. Replacement product or parts may include remanufactured or refurbished parts or components.

How long the warranty is effective:

ViewSonic® color CRT monitors, including the display tubes, are warranted for three (3) years for all parts and three (3) years for all labor from the date of the first consumer purchase.

Who the warranty protects: This warranty is valid only for the first consumer purchaser.

What the warranty does not cover: 1. Any product on which the serial number has been defaced, modified or removed. 2. Damage, deterioration or malfunction resulting from: a. Accident, misuse, neglect, fire, water, lightning, or other acts of nature, unauthorized product

modification, or failure to follow instructions supplied with the product. b. Repair or attempted repair by anyone not authorized by ViewSonic. c. Any damage of the product due to shipment. d. Removal or installation of the product. e. Causes external to the product, such as electrical power fluctuations or failure. f. Use of supplies or parts not meeting ViewSonic’s specifications. g. Normal wear and tear. h. Any other cause which does not relate to a product defect. 3. Removal, installation, and set-up service charges.

How to get service: 1. For information about receiving service under warranty, contact ViewSonic Customer Support. You will need to provide your product's serial number. 2. To obtain service under warranty, you will be required to provide (a) the original dated sales slip, (b) your name, (c) your address, (d) a description of the problem, and (e) the serial number of the product. 3. Take or ship the product freight prepaid in the original container to an authorized ViewSonic service center or ViewSonic. 4. For additional information or the name of the nearest ViewSonic service center, contact ViewSonic.

Limitation of implied warranties: THERE ARE NO WARRANTIES, EXPRESS OR IMPLIED, WHICH EXTEND BEYOND THE DESCRIPTION CONTAINED HEREIN INCLUDING THE IMPLIED WARRANTY OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.

Exclusion of damages: VIEWSONIC'S LIABILITY IS LIMITED TO THE COST OF REPAIR OR REPLACEMENT OF THE PRODUCT. VIEWSONIC SHALL NOT BE LIABLE FOR: 1. DAMAGE TO OTHER PROPERTY CAUSED BY ANY DEFECTS IN THE PRODUCT, DAMAGES BASED UPON INCONVENIENCE, LOSS OF USE OF THE PRODUCT, LOSS OF TIME, LOSS OF PROFITS, LOSS OF BUSINESS OPPORTUNITY, LOSS OF GOODWILL, INTERFERENCE WITH BUSINESS RELATIONSHIPS, OR OTHER COMMERCIAL LOSS, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. 2. ANY OTHER DAMAGES, WHETHER INCIDENTAL, CONSEQUENTIAL OR OTHERWISE. 3. ANY CLAIM AGAINST THE CUSTOMER BY ANY OTHER PARTY. Effect of state law: This warranty gives you specific legal rights, and you may also have other rights which vary from state to state. Some states do not allow limitations on implied warranties and/or do not allow the exclusion of incidental or consequential damages, so the above limitations and exclusions may not apply to you.

Sales outside the U.S.A. and Canada: For warranty information and service on ViewSonic products sold outside of the U.S.A. and Canada, contact ViewSonic or your local ViewSonic dealer.

ViewSonic CRT Monitor Warranty (V3.0) Release Date: 03-26-2002

Page 19 of the ViewSonic Graphics Series Monitor (A91f+) user manual — ViewSonic Corporation
Page 19 · click to enlarge
Page 19

ViewSonic Corporation

Sources

References & links

Pages referenced in this manual — manufacturer, support and downloads.

Ask about the ViewSonic Graphics Series Monitor (A91f+)

Owners and our team usually reply within a day — and your question helps the next person too.

Add your email to get notified when it’s answered — no spam, ever.

0 questions
No questions yet about the ViewSonic Graphics Series Monitor (A91f+)

Be the first to ask — other owners or our team will answer.

Original document

ViewSonic Graphics Series Monitor (A91f+) manual PDF

19 pages·625 KB·Computer Monitor·PDF
Click any page above to open it here
Page 1 / …
100%
Loading pages…