Instruction/ maintenance manual of the product 7500 Verizon
Go to page of 186
030-300536 Rev. A 1 August 2007 V ERSA L INK ™ W IRELESS G ATEWAY (M ODEL 7500) U SER G UIDE.
030-300536 Rev. A 2 August 2007 User Guide VersaLink Wireless Gatewa y ( Model 7500 ) CONTENTS 1. PRODUCT DESCRIPT ION ............................................................................................................ ...................... 5 2.
030-300536 Rev. A 3 August 2007 User Guide VersaLink Wireless Gatewa y ( Model 7500 ) 12. MAIN (H OME PAGE)......................................................................................................................................... 49 12.
030-300536 Rev. A 4 August 2007 User Guide VersaLink Wireless Gatewa y ( Model 7500 ) 16.17 IP Address Di s tribution.......................................................................................................................... 157 16.18 Private LA N—Conf iguring NAT .
030-300536 Rev. A 5 August 2007 User Guide VersaLink Wireless Gatewa y ( Model 7500 ) 1. PRODUCT DESCRIPTION The Verizon ® VersaLink™ Wireless Gateway provides reliable, hi gh-speed, Internet access to y our existing small office phone line and is cap able of data rates hundreds of ti mes faster than a traditional analog modem.
030-300536 Rev. A 6 August 2007 User Guide VersaLink Wireless Gatewa y ( Model 7500 ) 3. REGULA T OR Y I NFORMA TION 3.1 FCC Compliance Note (FCC ID: CH875 00XX-07) This equipm ent has been tested and fou nd to comply with the limits for a Class B d igital device, pursuant to Part 1 5 of the Federal Com munication Com mission (FCC) Rule s.
030-300536 Rev. A 7 August 2007 User Guide VersaLink Wireless Gatewa y ( Model 7500 ) The telephone company may mak e changes to their facilities, equ ipment, operations, or procedures th at could affect the operation of this equipment.
030-300536 Rev. A 8 August 2007 User Guide VersaLink Wireless Gatewa y ( Model 7500 ) 4. NETWORKING REQUIREMENTS The following system specifications are required fo r op timum performance o f the Ro uter via 10/100 Base-T Ethernet or USB installations.
030-300536 Rev. A 9 August 2007 User Guide VersaLink Wireless Gatewa y ( Model 7500 ) 5. HARDW ARE FEA TURES 5.1 LED Indicators This section explains the LED States and Descriptions. LED indicators are used to ve rify the unit’s operation an d status.
030-300536 Rev. A 10 August 2007 User Guide VersaLink Wireless Gatewa y ( Model 7500 ) 5.2 Cable Connectors and Switch Locations • DSL connector (RJ-11 ) • Reset push but ton • Four Ethernet (RJ-45) connecto rs with optiona l UPLINK/E1 po rt and optional E4/DATA port NOTE: 1.
030-300536 Rev. A 11 August 2007 User Guide VersaLink Wireless Gatewa y ( Model 7500 ) installed in a PC or Hub at the same time, on ly the connector that syncs up first will be used. POWER Barrel connector Connects the 12 VD C power connector to an AC wall jack.
030-300536 Rev. A 12 August 2007 User Guide VersaLink Wireless Gatewa y ( Model 7500 ) 6. HARDW ARE INST ALLA TIONS The following instructions explain how to install your Ve rsaLink Gateway using 10/100 Base-T Ethernet, Wireless, Ethernet Uplink, or USB connections.
030-300536 Rev. A 13 August 2007 User Guide VersaLink Wireless Gatewa y ( Model 7500 ) 6.1.1 Connecting VersaLink via 10/ 100 Base-T Ethernet To connect your Ve rsaLink using the 10/100-BaseT Ethernet connection, please follow these ste ps: 1.
030-300536 Rev. A 14 August 2007 User Guide VersaLink Wireless Gatewa y ( Model 7500 ) To network VersaLink to computers in you r home or office using a wireless installation, you will need to confirm the following: 1. Ensure that each PC on your wireless networ k has an 802.
030-300536 Rev. A 15 August 2007 User Guide VersaLink Wireless Gatewa y ( Model 7500 ) 6.1.3 Connecting VersaLink via UPLINK/E1 The Uplink feature is optional. If you want to install you r Router so that it uplinks to a nother ADSL device, foll ow the steps outlined below: 1.
030-300536 Rev. A 16 August 2007 User Guide VersaLink Wireless Gatewa y ( Model 7500 ) 4. Complete the instructions outlined in section 7, “Ins ta lling the USB Drivers.
030-300536 Rev. A 17 August 2007 User Guide VersaLink Wireless Gatewa y ( Model 7500 ) 7. INST ALLING THE USB DRIVERS This section e xplains how to install the USB drivers for y our Router. If you are using only an Ethe rnet connectio n, USB driver installation is not necessary.
030-300536 Rev. A 18 August 2007 User Guide VersaLink Wireless Gatewa y ( Model 7500 ) Figure 2. Windows 98 SE 2. Windows 98 SE: Select Sear ch for the best driver for your device.
030-300536 Rev. A 19 August 2007 User Guide VersaLink Wireless Gatewa y ( Model 7500 ) 3. Windows 98 SE: Select CD- ROM drive (Figure 4). Click Next . Windows will search for the driver. Figure 4. Windows 98 SE Note : If Figu re 4 does not appear at this step, and Figure 5 appears with the text ‘USB Composi te device’, ‘C:WindowsInfUSB.
030-300536 Rev. A 20 August 2007 User Guide VersaLink Wireless Gatewa y ( Model 7500 ) 5. Windows 98 SE: Windows will display the location of the driver (Figure 6). The drive “letter” may vary. Click Nex t. Figure 6. Windows 98 SE 6. Windows 98 SE: Remove the CD from the CD-ROM Drive.
030-300536 Rev. A 21 August 2007 User Guide VersaLink Wireless Gatewa y ( Model 7500 ) 8. Windows 98 SE : Figure 9 may pop up, depe nding on how Windo ws 98 SE was installe d on the com puter. The installation of the Router r equires files that are supplied by Microsoft for Windows 98 SE.
030-300536 Rev. A 22 August 2007 User Guide VersaLink Wireless Gatewa y ( Model 7500 ) 9. Windows 98 SE : The window below confirms that the PC has finished loading the drivers (Figu re 11). Click Finish . Figure 11. Windows 98 SE 10. Windows 98 SE : Click Yes to restart your c omputer (Figure 12).
030-300536 Rev. A 23 August 2007 User Guide VersaLink Wireless Gatewa y ( Model 7500 ) 7.2 Installing the USB Driver for Windows ME IMPORTANT: Co nfirm that the CD-ROM provided with the Router kit is inserted into the PC’s CD-ROM drive before beginning this installatio n.
030-300536 Rev. A 24 August 2007 User Guide VersaLink Wireless Gatewa y ( Model 7500 ) 2. Windows ME : Windows will display the location of the driver (Figure 15). Click Next. Figure 15. Windows ME 3. Windows ME : The window below confirms that the PC has fi nished loading the drivers (Figure 16).
030-300536 Rev. A 25 August 2007 User Guide VersaLink Wireless Gatewa y ( Model 7500 ) 4. Windows ME : When the System Set tings Chan ge screen a ppears, the US B drivers are installed pr operly (Figure 17). Click Yes. Figure 17. Windows ME Congratulations! You have completed the software installa tion for the USB drivers.
030-300536 Rev. A 26 August 2007 User Guide VersaLink Wireless Gatewa y ( Model 7500 ) 2. Windows 2000: The Install Hardware De vice Drivers window appea rs (Figure 20). Se lect Search for a suitable driver for my device (rec ommended). Click Ne xt . Figure 20.
030-300536 Rev. A 27 August 2007 User Guide VersaLink Wireless Gatewa y ( Model 7500 ) 4. Windows 2000: The Driver Files Search Results window a ppears (Fi gure 22). Note : The drive “letter” may vary. Cli ck Next . Figure 22. Windows 2000 5. Windows 2000: The window below conf irms that the PC has finished load ing the drivers (Figure 23).
030-300536 Rev. A 28 August 2007 User Guide VersaLink Wireless Gatewa y ( Model 7500 ) 6. Windows 2000 : When the Syst em Sett ings Cha nge scr een app ears, th e USB dr ivers are installed properly (Figure 24). Click Yes. Figure 24. Windows 2000 Congratulations! You have completed the software installa tion for the USB drivers.
030-300536 Rev. A 29 August 2007 User Guide VersaLink Wireless Gatewa y ( Model 7500 ) 2. Windows XP : The window below confirms that the PC has finished lo ading the drivers (Figure 26). Click Finish . Figure 26. Windows XP Congratulations! You have completed the software installa tion for the USB drivers.
030-300536 Rev. A 30 August 2007 User Guide VersaLink Wireless Gatewa y ( Model 7500 ) 7.5 Installing the USB Driver for Windows Vista™ IMPORTANT: Co nfirm that the CD-ROM provided with the Router kit is inserted into the PC’s CD-ROM drive before beginning this installatio n.
030-300536 Rev. A 31 August 2007 User Guide VersaLink Wireless Gatewa y ( Model 7500 ) 8. ACCESSING VERSALINK 8.1 Logging on to VersaLink This section explains the logon procedures for you r VersaLink. Th is procedure sho uld be used any ti me you want to access or make change s to VersaLink’s configurations or firewall settings.
030-300536 Rev. A 32 August 2007 User Guide VersaLink Wireless Gatewa y ( Model 7500 ) 8.2 Changing the Password After you have clicked OK in the Modem Secure screen, t he following User Settings screen will appear. This screen allows you t o change the default adm inistrator nam e and passwo rd to the valu es of your ch oice.
030-300536 Rev. A 33 August 2007 User Guide VersaLink Wireless Gatewa y ( Model 7500 ) After you have entered t he desired values, cli ck Apply. If you clicked Apply, the following pop-up screen will appear. Click OK to allow the changes to take effect.
030-300536 Rev. A 34 August 2007 User Guide VersaLink Wireless Gatewa y ( Model 7500 ) If you clicked OK in the pop-up screen, th e following screen will appe ar. This is the main page of your Router’s Web pages, also referred to in t his docum ent as the home page.
030-300536 Rev. A 35 August 2007 User Guide VersaLink Wireless Gatewa y ( Model 7500 ) 9. CONFIGURING YOUR BROADBAND CONNECTION To browse the Internet using your Rou ter, you must confirm your DSL connection , set up your account profile, and establish a DHCP or PPP session with your Internet service provider (ISP) .
030-300536 Rev. A 36 August 2007 User Guide VersaLink Wireless Gatewa y ( Model 7500 ) After confirming your DSL link, DHCP customers can now br owse the Internet. However, PPP customers will need to complete further instructions, as explained in th e following note.
030-300536 Rev. A 37 August 2007 User Guide VersaLink Wireless Gatewa y ( Model 7500 ) If you clicked Not Connected in the preceding screen, the following pop-up screen will prompt you for a user name and password. Enter the User name and Password you used in the User Set tings screen, in section 8 .
030-300536 Rev. A 38 August 2007 User Guide VersaLink Wireless Gatewa y ( Model 7500 ) To set up your accoun t profile. Click the Edit icon. • Connection Name: The name o f the connect ion profile your are using for you r Internet c onnection. • Default: Th e name of the default profile that is used when the Router auto connects t o the ISP.
030-300536 Rev. A 39 August 2007 User Guide VersaLink Wireless Gatewa y ( Model 7500 ) Next, select the co nnection ty pe (Manual, O n Demand, Always On) that you want t o use for y our default co nnection profile. • Manual: Select this option if you want to manually establish your PPP session.
030-300536 Rev. A 40 August 2007 User Guide VersaLink Wireless Gatewa y ( Model 7500 ) To save your account password, in the Save Passw ord field, click the top option. Clicking this option allows the Router to m ake a PPP c onnection without fir st prom pting you for a password.
030-300536 Rev. A 41 August 2007 User Guide VersaLink Wireless Gatewa y ( Model 7500 ) 9.3 Connecting to the Internet After you have set up your ac count profi le using t he steps explaine d in sect ion 9.2, you are ready to esta blish a PP P session (Intern et connection) with Verizon.
030-300536 Rev. A 42 August 2007 User Guide VersaLink Wireless Gatewa y ( Model 7500 ) 9.4 Disconnecting from the Internet If you have finished browsi ng the Inter net and want to disconnect from y our Internet se rvice provide r, from t he My Modem panel in the home page, click the connected link (next to Internet Status).
030-300536 Rev. A 43 August 2007 User Guide VersaLink Wireless Gatewa y ( Model 7500 ) If you clicked OK to disconnect your PPP session, after a brief moment, the PPP Status in the DSL Connection screen should display Down . Also, at the home page in the My Modem panel, the Intern et Status field will display Not Connecte d .
030-300536 Rev. A 44 August 2007 User Guide VersaLink Wireless Gatewa y ( Model 7500 ) 10. SETTING UP MACINT OSH OS X This section pr ovides inst ructions on how to use Macintos h Operatin g System 10 with t he Router. Fol low the instructions in this section to create a ne w network conf iguration for Macin tosh OS X.
030-300536 Rev. A 45 August 2007 User Guide VersaLink Wireless Gatewa y ( Model 7500 ) 10.3 Creating a New Location After clicking the Network icon, the Networ k screen will appear. Select New Location from the Location field. 10.4 Naming the New Location After selecting New Location in the Networ k screen, the following screen will appear.
030-300536 Rev. A 46 August 2007 User Guide VersaLink Wireless Gatewa y ( Model 7500 ) 10.6 Checking the IP Connection To verify that the computer is communicating with the Router, follow the instructions below. 1. Go to the “ Apple ” icon in the upper-left corner of the screen a nd select System Preferences .
030-300536 Rev. A 47 August 2007 User Guide VersaLink Wireless Gatewa y ( Model 7500 ) 10.7 Accessing Your Router In your Interne t Explorer Web br owser address bar, type http://192.1 68.1.1/ . Next, press Enter on your keyboard . The Modem Secure screen will appear.
030-300536 Rev. A 48 August 2007 User Guide VersaLink Wireless Gatewa y ( Model 7500 ) 11. BASIC CONFIGURA TION IMPORTANT: The following sections assume that y ou have active DSL and Internet service.
030-300536 Rev. A 49 August 2007 User Guide VersaLink Wireless Gatewa y ( Model 7500 ) 12. MAIN (HOME P AGE) After you have logged on to y our Router and establishe d a PPP session with your Internet se rvice provider (ISP), click Main in the top navigational menu.
030-300536 Rev. A 50 August 2007 User Guide VersaLink Wireless Gatewa y ( Model 7500 ) 12.1 My Gateway Panel In the hom e page, the My Mo dem panel allows you to view details abou t your Route r’s connections and to access the connection settings in your Rou ter.
030-300536 Rev. A 51 August 2007 User Guide VersaLink Wireless Gatewa y ( Model 7500 ) 12.3 Action Zone Panel In the home page, t he Action Zone panel allows quick access to Internet services provided by Verizon. The following details are displayed in the Action Zone panel.
030-300536 Rev. A 52 August 2007 User Guide VersaLink Wireless Gatewa y ( Model 7500 ) 13. WIRELESS SETTINGS This section explains the wireless features of your R outer and guides you throu gh the configurab le settings.
030-300536 Rev. A 53 August 2007 User Guide VersaLink Wireless Gatewa y ( Model 7500 ) 13.2 Simple Config If you select Wireless Settings from the t op navigati onal menu a nd then sel ect Simple Config in the s ubmenu options at the left of the screen, the following screen w ill appear.
030-300536 Rev. A 54 August 2007 User Guide VersaLink Wireless Gatewa y ( Model 7500 ) The following example illustrates Simple Config using the Push Button Method: 1. At the Simple Config screen, click the blac k Enable Simple Conf button, and then select Use Push Button method.
030-300536 Rev. A 55 August 2007 User Guide VersaLink Wireless Gatewa y ( Model 7500 ) 3. Run the clie nt’s wi-fi protected set up Wizard—for t he “push button” me thod. NOTE : Your device’s wi -fi protected setu p Wizard may diffe r from the Wizard sc reens shown in this exam ple.
030-300536 Rev. A 56 August 2007 User Guide VersaLink Wireless Gatewa y ( Model 7500 ) 13.3 Basic Security Settings If you select Wireless Settings from the t op navigati onal menu a nd then sel ect Basic Security Settings in the submenu options at the left of the screen, the following scre en will appear.
030-300536 Rev. A 57 August 2007 User Guide VersaLink Wireless Gatewa y ( Model 7500 ) Basic Security Settings Wireless Operation Factory Default = On Choose the desired setting.
030-300536 Rev. A 58 August 2007 User Guide VersaLink Wireless Gatewa y ( Model 7500 ) 13.4 Advanced Security Settings If you select Wireless Settings from the t op navigati onal menu a nd then sel ect Advanced Security Se ttings in the submenu options at the left of the screen, the following screen will app ear.
030-300536 Rev. A 59 August 2007 User Guide VersaLink Wireless Gatewa y ( Model 7500 ) Wireless MAC Authentication Allows you to limit access to yo ur wireless network by allowing only devices with speci fic MAC address to connect to your R outer. 802.
030-300536 Rev. A 60 August 2007 User Guide VersaLink Wireless Gatewa y ( Model 7500 ) 13.4.1.1 WEP Security If you select WEP in the Advanced Security Settings screen, the following screen will be displayed. NOTE: A WEP key is treated as either a string of text (ASCII) characters or a set of hexadecimal (Hex) characters.
030-300536 Rev. A 61 August 2007 User Guide VersaLink Wireless Gatewa y ( Model 7500 ) 13.4.1.2 WPA Security If you select WPA in t he Advanced Security Settings screen, the following screen will appear. Enter the appropriate values in the fields, and the n click Apply to allow the settings to take effect.
030-300536 Rev. A 62 August 2007 User Guide VersaLink Wireless Gatewa y ( Model 7500 ) WPA Authentication Method Factory Default = Personal (Pre-Share d Key) Personal (Pre-Sha red Key) – WPA stations share a pre-shared key (string form at) with the Router and do not authe nticat e with the RA DIUS server.
030-300536 Rev. A 63 August 2007 User Guide VersaLink Wireless Gatewa y ( Model 7500 ) 13.4.2 SSID Broadcast If you click the SSID Broadcast link in the Advanced Security Settings screen, the following screen will be displayed. When SSID Broadcast is en abl ed, any c omputer or wireless de vi ce using the SSID of “ ANY” can see the Router.
030-300536 Rev. A 64 August 2007 User Guide VersaLink Wireless Gatewa y ( Model 7500 ) 13.4.3 Wireless MAC Authentication If you select the Wireless MAC authentic ation link in the Advanced Secu rity Settings screen, the followi ng screen will appear.
030-300536 Rev. A 65 August 2007 User Guide VersaLink Wireless Gatewa y ( Model 7500 ) If you clicked Add , the following screen will appear. Enter the desired settings, and then click Apply . Traffic Allowed: When the MAC Filter is enabled , on ly stations in the MAC Filter Table (which are set to “Allowed”) will have access to t he Router.
030-300536 Rev. A 66 August 2007 User Guide VersaLink Wireless Gatewa y ( Model 7500 ) The following screen provide s an exampl e of values entered into th e fields. After you have enter ed your values and clicked Apply in the preceding screen, the following pop-up screen will appear.
030-300536 Rev. A 67 August 2007 User Guide VersaLink Wireless Gatewa y ( Model 7500 ) If you clicked OK in the pop-up screen, th e following screen will appear. The MAC address has been add ed to the list of MAC addresses. Confirm that a ckeck mark is displayed Enable Access List check box, an d then cl ick Apply .
030-300536 Rev. A 68 August 2007 User Guide VersaLink Wireless Gatewa y ( Model 7500 ) 13.4.4 802.11b/g Mode If you select the 802.11b/g Mode link in the Advanced Security Settings screen, the following screen will be displayed. This screen allows you to lim it access to your Route r based on technology type.
030-300536 Rev. A 69 August 2007 User Guide VersaLink Wireless Gatewa y ( Model 7500 ) 13.4.5 Other Advanced Wireless Options If you select the Other Advanced Wireless Options link in the Advanced Security Settings screen, the following screen will appear.
030-300536 Rev. A 70 August 2007 User Guide VersaLink Wireless Gatewa y ( Model 7500 ) 14. MY NETWORK This section discusses details about your Rou ter’s network. 14.1 Network Status To view your Router’s netw ork settings , from the top navigati onal menu, select My Network .
030-300536 Rev. A 71 August 2007 User Guide VersaLink Wireless Gatewa y ( Model 7500 ) 14.1.1 Access Shared Files In the My Network pan el, click the Access Shared Files link to access files from a de vice on your local network. (The device from which you will access files m ust have file sha ring enabled.
030-300536 Rev. A 72 August 2007 User Guide VersaLink Wireless Gatewa y ( Model 7500 ) 14.1.3 Rename Device In the My Network panel, click the Rename Device link to rename a device on your network.
030-300536 Rev. A 73 August 2007 User Guide VersaLink Wireless Gatewa y ( Model 7500 ) 14.1.5 Enable Application In the My Network pan el, click the Enable Application link to set up applications for your service profile.
030-300536 Rev. A 74 August 2007 User Guide VersaLink Wireless Gatewa y ( Model 7500 ) 14.2 Network Connections To edit your connectio n settings, from the top navigational menu select My Network . Next, select Network Connections in the submenu options at the left of the screen; the following screen will be disp layed.
030-300536 Rev. A 75 August 2007 User Guide VersaLink Wireless Gatewa y ( Model 7500 ) 14.2.1 Basic DSL Configuration If you clicked the Broadband Connection (DSL) link in the Network Connections screen, t he following screen will appear.
030-300536 Rev. A 76 August 2007 User Guide VersaLink Wireless Gatewa y ( Model 7500 ) 14.2.2 Advanced DSL Configuration If you clicked Advanced in the preceding screen, the following Advanced DSL Configuration screen will app ear.
030-300536 Rev. A 77 August 2007 User Guide VersaLink Wireless Gatewa y ( Model 7500 ) VC Settings Status Allows you to enable or disable your VC (V irtual Connection).
030-300536 Rev. A 78 August 2007 User Guide VersaLink Wireless Gatewa y ( Model 7500 ) If you clicked the expand icon in the preced ing screen, th e following screen will appear. When you are ready to collapse the VCs list, click the collapse icon . NOTE: 1.
030-300536 Rev. A 79 August 2007 User Guide VersaLink Wireless Gatewa y ( Model 7500 ) The following table explains the settings in the VC 1 Con figuration scree n.
030-300536 Rev. A 80 August 2007 User Guide VersaLink Wireless Gatewa y ( Model 7500 ) QoS Quality of Serv ice, which is de termined by your Service Provider. Possible Responses: CBR = Constant Bit Rate UBR = Unspecified Bit Rate VBR = Variable Bit Rate Protocol The Protoc ol for each VC, which is speci fied by your Service Provider.
030-300536 Rev. A 81 August 2007 User Guide VersaLink Wireless Gatewa y ( Model 7500 ) 14.2.2.2 Configuring the Router’s Protocol Settings for PPPoE or PPPoA To configure the Router’s protocol se ttings for PPPoE or PPPoA, access t o the VC 1 Configuration screen, as explained earlier in sectio n 14.
030-300536 Rev. A 82 August 2007 User Guide VersaLink Wireless Gatewa y ( Model 7500 ) For example, the following VC 1 Configuration screen displays PPPoA as the se lected Pr otoco l. The PPP oA and PPPoE screens have id entical configuration optio ns with the exception of the Tunneling feat ure.
030-300536 Rev. A 83 August 2007 User Guide VersaLink Wireless Gatewa y ( Model 7500 ) 14.2.2.3 Configuring the Router’s Protocol Settings for Bridge To configure the Router’s protocol settings for Bridge, access the VC 1 Configur ation screen, as ex plained earlier i n section 14.
030-300536 Rev. A 84 August 2007 User Guide VersaLink Wireless Gatewa y ( Model 7500 ) The following screen will appear. Bridge setti ngs are described in the following table. Protocol Mode Description Bridge A bridge is a lay er 2 device that connect s two segm ents of the same LAN that use the sam e protocol su ch as Ethernet.
030-300536 Rev. A 85 August 2007 User Guide VersaLink Wireless Gatewa y ( Model 7500 ) Next, select the desi red Brid ge mode from Bridge Mode drop-down m enu.
030-300536 Rev. A 86 August 2007 User Guide VersaLink Wireless Gatewa y ( Model 7500 ) VC 1 – Bridge Protocol (Bridge Mode) VC Status The protocol status is E nabled. VPI This setting allows you to change your VPI (Virtual Path Indicator) value for a particular VC , whic h is define d by your Service Provi der.
030-300536 Rev. A 87 August 2007 User Guide VersaLink Wireless Gatewa y ( Model 7500 ) If you select Bridge as the Protocol, a nd then select Bridge from the Bridge Mode drop-down m enu, the follo wing screen will appear. Click Apply to save your selection.
030-300536 Rev. A 88 August 2007 User Guide VersaLink Wireless Gatewa y ( Model 7500 ) If you select Bridge as the Protocol, a nd then select Route d Bridge from the Bridge Mode drop-down menu, the following screen will appear. Enter the desired va lues in the fields provided , and then click Apply .
030-300536 Rev. A 89 August 2007 User Guide VersaLink Wireless Gatewa y ( Model 7500 ) 14.2.3 Configuring VersaPort (Ethernet WAN Uplink) If you clicked the VersaPort link in the Network Connections screen, the following screen will appear. This screen allows you to select how the UPLINK/E1 port on the rear of the Router will be used.
030-300536 Rev. A 90 August 2007 User Guide VersaLink Wireless Gatewa y ( Model 7500 ) 14.2.3.1 Enabling Private LAN—Disabling Ethernet WAN Uplink If you selected Private LAN in the VersaPort screen, this will enable the Route r’s DSL transceiver, and the Router will use its DSL port as the WAN interface.
030-300536 Rev. A 91 August 2007 User Guide VersaLink Wireless Gatewa y ( Model 7500 ) 14.2.3.2 Enabling Ethernet WAN Uplink—Disabling Private LAN If you selected Ethernet WAN Uplink in the VersaPor t screen, this will disable the Router’s DSL transceiver and the DSL port.
030-300536 Rev. A 92 August 2007 User Guide VersaLink Wireless Gatewa y ( Model 7500 ) 14.2.3.3 Editing the VC Protocol Settings for Ethernet WAN Uplink NOTE: The instructions in this section refer to the Router configured for Ethernet W AN Uplink mode.
030-300536 Rev. A 93 August 2007 User Guide VersaLink Wireless Gatewa y ( Model 7500 ) 14.2.3.3.2 Configuring the Ethernet WAN Uplink Protocol Settings for Route d IP If you select Routed IP from the Protocol drop-down menu, the following scr een will appear.
030-300536 Rev. A 94 August 2007 User Guide VersaLink Wireless Gatewa y ( Model 7500 ) Uplink Settings for Ether net WAN Uplink (Routed IP protocol) Tunneling Factory Default = Ena ble If Enabled, this option allows PPP tra ffic to be bridged to the WAN.
030-300536 Rev. A 95 August 2007 User Guide VersaLink Wireless Gatewa y ( Model 7500 ) 15. FIREW ALL SETTINGS 15.1 General Firewall Security Settings This section e xplains how to configure your Rout er’s fi re wall security features.
030-300536 Rev. A 96 August 2007 User Guide VersaLink Wireless Gatewa y ( Model 7500 ) General Firewall Settings Max imu m Se c ur ity (High) High security level only allows basic In ternet functionality . Only Mail, News, Web, FTP, and IPSEC are allowed.
030-300536 Rev. A 97 August 2007 User Guide VersaLink Wireless Gatewa y ( Model 7500 ) NOTE: The informat ion display ed in this screen m ay differ from your actual screen, depending on the level of security you have selected.
030-300536 Rev. A 98 August 2007 User Guide VersaLink Wireless Gatewa y ( Model 7500 ) 15.3 Port Forwarding To access the Port Forwarding screen, fr om the top navigat ional menu, select Firewall Settings. Then select Port Forwarding from the menu options at the left of the screen.
030-300536 Rev. A 99 August 2007 User Guide VersaLink Wireless Gatewa y ( Model 7500 ) 15.3.1 Editing a Profile Name Port Forwardi ng services can be added t o connectio n prof iles. To edit an existing profile name, and then later add port forwardi ng services to th e profile, fo llow the instructions in this section.
030-300536 Rev. A 100 August 2007 User Guide VersaLink Wireless Gatewa y ( Model 7500 ) Type the nam e of your choice in the field provided . Then, clic k Apply to allow the change to take effect.
030-300536 Rev. A 101 August 2007 User Guide VersaLink Wireless Gatewa y ( Model 7500 ) 15.3.2 Creating a New Connection Profile If you desire to create a ne w profile, and then later add port forwarding services to th e new profile, follow th e instructions in this section.
030-300536 Rev. A 102 August 2007 User Guide VersaLink Wireless Gatewa y ( Model 7500 ) If you clicked the Edit button, the following screen will appear. Type th e profile nam e of your choice in the field, and then click Apply to allow the change to take e ffect.
030-300536 Rev. A 103 August 2007 User Guide VersaLink Wireless Gatewa y ( Model 7500 ) If you clicked Apply , the following screen will be displayed. The Current Profile field now displays the profile name that y ou entered. 15.3.3 Configuring Port Forwarding Services Port Forwarding Services contain sp ecific service settings.
030-300536 Rev. A 104 August 2007 User Guide VersaLink Wireless Gatewa y ( Model 7500 ) 15.3.3.1 Adding Port Forwarding Services to a Profile To add a predefined serv ice to a profile, in the Port Forwardi ng screen, click the Current Profile drop-down menu, and then select the name of th e profile to which you want to add services.
030-300536 Rev. A 105 August 2007 User Guide VersaLink Wireless Gatewa y ( Model 7500 ) If you clicked Add , the following Ne w Port For wardi ng Rule screen will appear.
030-300536 Rev. A 106 August 2007 User Guide VersaLink Wireless Gatewa y ( Model 7500 ) 2. Select the option that describes how you want the service to be activated. • Host: Allows the unsolicited inbound traffic to a particular PC on the LAN • Dynamic: Enables inbound traffic based o n specific outboun d traffic 3.
030-300536 Rev. A 107 August 2007 User Guide VersaLink Wireless Gatewa y ( Model 7500 ) If you clicked the details icon in the preceding scr een, the following screen will be display ed. Click Cancel when you are ready to return t o the Port Forwarding screen.
030-300536 Rev. A 108 August 2007 User Guide VersaLink Wireless Gatewa y ( Model 7500 ) If you clicked Add, the following screen will be disp layed. Click Create. If you clicked Create , the following Create Port Forwarding Service screen will appear.
030-300536 Rev. A 109 August 2007 User Guide VersaLink Wireless Gatewa y ( Model 7500 ) 15.3.3.3.1 Creating a Service Based on Sp ecific Port Forwarding Ports The Port Forwarding feature allows y ou to forward a range of WAN ports to an IP add ress on the LAN.
030-300536 Rev. A 110 August 2007 User Guide VersaLink Wireless Gatewa y ( Model 7500 ) Port Forwarding Service Protocol TCP – Transm ission Co ntrol Protoc ol UDP – User Datagram Protocol Global Port Start The WAN- side TCP/UDP start port. Global Port End The WAN-side TCP/UDP end port.
030-300536 Rev. A 111 August 2007 User Guide VersaLink Wireless Gatewa y ( Model 7500 ) This screen displays the service nam e in the field. 8. Select how the service will be activated. • Host allows unsolicited inbound traffi c to a particular PC on the LAN.
030-300536 Rev. A 112 August 2007 User Guide VersaLink Wireless Gatewa y ( Model 7500 ) If you clicked Apply , the following screen will appear. The Port Fo rwarding service has been add ed to the list of active services. To add additio nal port forwarding services to your Rou ter, repeat steps 1 through 10.
030-300536 Rev. A 113 August 2007 User Guide VersaLink Wireless Gatewa y ( Model 7500 ) 15.3.3.3.2 Creating a Se rvice Based on Specific Por t Triggering Ports The Trigger Ports feature allows you t o forward a range of ports to an IP address on the LAN only after specific outbound t raffic.
030-300536 Rev. A 114 August 2007 User Guide VersaLink Wireless Gatewa y ( Model 7500 ) If you clicked Create in the preceding screen, the following screen w ill appear. Com plete the following steps to add a port triggering rule. 1. Click the Port Triggering option.
030-300536 Rev. A 115 August 2007 User Guide VersaLink Wireless Gatewa y ( Model 7500 ) 2. Type the name of the custom service that you are creating in the field pro vided. This will be the name of the port forwardi ng service for w hich you are confi guring specific Port T riggering rules.
030-300536 Rev. A 116 August 2007 User Guide VersaLink Wireless Gatewa y ( Model 7500 ) 6. After you click Apply, the following screen will b e displayed. From th e drop-down list, select name of your custom port triggering rule (the nam e will appear at the bottom of the list under Triggering Rule ).
030-300536 Rev. A 117 August 2007 User Guide VersaLink Wireless Gatewa y ( Model 7500 ) If you click OK in the pop-up screen, the following screen will a ppear. The Port Triggering service has been added to the list of active services. To add additional p ort triggeri ng services to your Router, re peat steps 1 through 7.
030-300536 Rev. A 118 August 2007 User Guide VersaLink Wireless Gatewa y ( Model 7500 ) 15.4 DMZ Host—Single IP Address Passthrough In the Firewall Settings scree n, select DMZ Host from the submenu options displayed at the left of the screen.
030-300536 Rev. A 119 August 2007 User Guide VersaLink Wireless Gatewa y ( Model 7500 ) To configure DMZ Host, in the DMZ Host screen, select a device from t he drop-down menu. The sel ected device will share your WAN IP address. Next, click Enable to allow th e setting to take effect.
030-300536 Rev. A 120 August 2007 User Guide VersaLink Wireless Gatewa y ( Model 7500 ) If you cli cked OK , the following screen will app ear. After a brief de lay, the home page will be displayed. Confir m that you have a DSL link a nd that yo ur PPP Status displays UP.
030-300536 Rev. A 121 August 2007 User Guide VersaLink Wireless Gatewa y ( Model 7500 ) 15.4.2 Disabling DMZ Host To disable DM Z Host (if i t has been pre viously enabled), cl ick Disable in the DMZ Host screen. If you clicked Disable , the following screen will be displayed.
030-300536 Rev. A 122 August 2007 User Guide VersaLink Wireless Gatewa y ( Model 7500 ) If you clicked OK , the following pop-up screen will appear. After a brief delay, the ho me page will be d isplayed. Confirm t hat you have a DSL link a nd that you r PPP Status displays UP.
030-300536 Rev. A 123 August 2007 User Guide VersaLink Wireless Gatewa y ( Model 7500 ) 15.5 Remote Administration In the Firewall Settings scree n, select Remote Administr ation from the submenu options dis played at t he left of the screen.
030-300536 Rev. A 124 August 2007 User Guide VersaLink Wireless Gatewa y ( Model 7500 ) Remote Administration User Name Enter the user name in this field. Password Enter your password in this field. Timeout Defa ult = 20 m inutes Enter the number of m inutes after whic h rem ote access will be deactivated.
030-300536 Rev. A 125 August 2007 User Guide VersaLink Wireless Gatewa y ( Model 7500 ) The following screen show s a check mark in the Enable Re mote Access and Disable Timeout c heck boxes. The following message is displayed: Remote access is currently enabled.
030-300536 Rev. A 126 August 2007 User Guide VersaLink Wireless Gatewa y ( Model 7500 ) 15.6 Static NAT In the Firewall Settings scree n, select Static NAT from the subm enu opti ons displa yed at the le ft of the scree n.
030-300536 Rev. A 127 August 2007 User Guide VersaLink Wireless Gatewa y ( Model 7500 ) To enable Static NAT, select a device from the Static NAT Device drop-d own menu, or enter t he IP address of the device to whic h you wa nt to assign Stat ic NAT.
030-300536 Rev. A 128 August 2007 User Guide VersaLink Wireless Gatewa y ( Model 7500 ) 15.6.2 Disabling Static NAT To disable Static NAT (if it has been previously enabled), click Disable in the Stat ic NAT screen. After you have disabled Static NAT t he following sc reen will show no devi ces enabled for static NAT.
030-300536 Rev. A 129 August 2007 User Guide VersaLink Wireless Gatewa y ( Model 7500 ) 15.7 Security Log In the Firewall Settings scree n, select Security L og from the su bmenu opt ions displayed at the left o f the screen.
030-300536 Rev. A 130 August 2007 User Guide VersaLink Wireless Gatewa y ( Model 7500 ) Security Log Close Clicking this button closes the security lo g screen.
030-300536 Rev. A 131 August 2007 User Guide VersaLink Wireless Gatewa y ( Model 7500 ) 16. ADV ANCED The following sections di scuss the advance d features of your Router, such as IP address distributio n, firmware upgrades, etc. IMPORTANT: This section assumes that you have active DSL and Internet service.
030-300536 Rev. A 132 August 2007 User Guide VersaLink Wireless Gatewa y ( Model 7500 ) If you clicked Yes in the preceding warning screen, th e follo wing screen will appear. The Advanced screen allows you to access various configurable features in your Router.
030-300536 Rev. A 133 August 2007 User Guide VersaLink Wireless Gatewa y ( Model 7500 ) If you want t o PING usi ng the System Self Test screen (diagnostic s page) show n above, enter your DNS or IP address in the fields pr ovided and click o n the test button.
030-300536 Rev. A 134 August 2007 User Guide VersaLink Wireless Gatewa y ( Model 7500 ) PPP Indicates that a PPPoE or PPP oA se ssion must already be es tablished.
030-300536 Rev. A 135 August 2007 User Guide VersaLink Wireless Gatewa y ( Model 7500 ) 16.2 Restore Defaults In the Advanc ed screen, click Restore Defaults. This screen allows you to restor e the Router to its factory default settings. To res tore the Router , click the Restore Defaults button .
030-300536 Rev. A 136 August 2007 User Guide VersaLink Wireless Gatewa y ( Model 7500 ) 16.3 Reboot Gateway In the Advanc ed screen, click Reboot Gateway. This screen allows you to reboot your Router without lo sing any customized sett ings that yo u have ma de in the Router .
030-300536 Rev. A 137 August 2007 User Guide VersaLink Wireless Gatewa y ( Model 7500 ) 16.4 Users In the Advanc ed screen, click Users . The following User Settings screen allows you to chan ge the administrator’s user name and password. Ty pe the desired values in the fields provided , and then click Apply to allow the settings to take effect.
030-300536 Rev. A 138 August 2007 User Guide VersaLink Wireless Gatewa y ( Model 7500 ) 16.5 QOS In the Advanc ed screen, click QOS . This screen allows you to configure Quality of Service p arameters in the Router. Select the desired Quality of Service settin gs, and then click Apply to allow the setting to take effect.
030-300536 Rev. A 139 August 2007 User Guide VersaLink Wireless Gatewa y ( Model 7500 ) 16.6 Remote Administration In the Advanc ed screen, click Remote Administration . This sc reen allows you to configure y our Router so that it can be accessed rem otely via a URL.
030-300536 Rev. A 140 August 2007 User Guide VersaLink Wireless Gatewa y ( Model 7500 ) Remote Administration User Name Default = adm in The name used f or the Rem ote Admini stration session. The only valid characters are (a- z, A-Z, 0-9). The user name m ust be at least 6 characters and m ust not exceed 12 characters long.
030-300536 Rev. A 141 August 2007 User Guide VersaLink Wireless Gatewa y ( Model 7500 ) 16.8 Detect WAN Configuration In the Advanc ed screen, click Detect WAN Configura tion .
030-300536 Rev. A 142 August 2007 User Guide VersaLink Wireless Gatewa y ( Model 7500 ) If no connection is detected, the following screen will app ear. Click Enable Continuous Retries . The Router will automatically continu e to check the WAN connection.
030-300536 Rev. A 143 August 2007 User Guide VersaLink Wireless Gatewa y ( Model 7500 ) If you clicked OK , the following screen will appear. If want to disable continuous retries, click Disable Continuous Retries.
030-300536 Rev. A 144 August 2007 User Guide VersaLink Wireless Gatewa y ( Model 7500 ) 16.9 Dynamic DNS Configuration In the Advanc ed screen, click Dynamic DNS Configuration . Dy namic DNS is a dyna mic IP address that can aliased to a static hostname, allowing a computer on th e network to be more easily accessible from the Internet.
030-300536 Rev. A 145 August 2007 User Guide VersaLink Wireless Gatewa y ( Model 7500 ) 16.10 DNS Server In the Advanc ed screen, click DNS Server . The following screen will appear.
030-300536 Rev. A 146 August 2007 User Guide VersaLink Wireless Gatewa y ( Model 7500 ) If you clicked ADD DNS Entry , the following screen will appear. Typ e the Host Name and IP Address in the fields provide d. Then, cli ck Apply to cont inue. For example, the following screen shows DNS values in the fields.
030-300536 Rev. A 147 August 2007 User Guide VersaLink Wireless Gatewa y ( Model 7500 ) If you clicked Apply , the following screen will be displayed. This screen shows that the Host Name and IP Address have been added to t he DNS serve r.
030-300536 Rev. A 148 August 2007 User Guide VersaLink Wireless Gatewa y ( Model 7500 ) 16.11 Configuration File In the Advanc ed screen, click Configuration File. This screen allows you to save and load confi guration fil es, which are used to back up and restore th e Router’s current configuration.
030-300536 Rev. A 149 August 2007 User Guide VersaLink Wireless Gatewa y ( Model 7500 ) 16.12 Firmware Upgrade In the Advanc ed screen, click Firmware Upgrade.
030-300536 Rev. A 150 August 2007 User Guide VersaLink Wireless Gatewa y ( Model 7500 ) If you clicked Upgrade Now, the following screen will appear. IMPORTANT: O nce the transfe r has started, do not t urn off y our Router’ s power, an d do not navigate t o other Web pages until the upload has completed.
030-300536 Rev. A 151 August 2007 User Guide VersaLink Wireless Gatewa y ( Model 7500 ) After the upload has completed, the following screen will appear. Please wait a brief moment while your Router is being reset. After the Router has been reset, the home page will appe ar.
030-300536 Rev. A 152 August 2007 User Guide VersaLink Wireless Gatewa y ( Model 7500 ) 16.13 VPN In the Advanc ed screen, click VPN. This feature allows you to select the VPN options for your Router. VPN PPTP Passthrough Factory Default = Enabled If enabled (a check mark will appear in the box), PPTP will work through the Gateway’s NAT function.
030-300536 Rev. A 153 August 2007 User Guide VersaLink Wireless Gatewa y ( Model 7500 ) 16.14 Universal Plug and Play In the Advanc ed screen, click Universal Plug and Play. This feature advertises the presence of your Router on t he LAN. To enable UPnP in your Router, do the following : 1.
030-300536 Rev. A 154 August 2007 User Guide VersaLink Wireless Gatewa y ( Model 7500 ) 16.15 Time In the Advanc ed screen, click Time. This feature allows you to set the date and time values on you r Router. Enter the desired settings, and then click Apply .
030-300536 Rev. A 155 August 2007 User Guide VersaLink Wireless Gatewa y ( Model 7500 ) To edit the time server settings, in th e Date and Time screen, click the adjacent edit ic on. The following screen will appear. Next, e nter the IP a ddress or dom ain name of the server yo u want to use.
030-300536 Rev. A 156 August 2007 User Guide VersaLink Wireless Gatewa y ( Model 7500 ) 16.16 Routing In the Advanc ed screen, click Routing . The Routing table maintains th e routes or paths of where specific types of data will be routed across a network.
030-300536 Rev. A 157 August 2007 User Guide VersaLink Wireless Gatewa y ( Model 7500 ) If you clicked New Rout e, the following screen will appear. Enter the ap propriate values in the fields, an d then click Apply . 16.17 IP Address Distribution In the Advanc ed screen, click IP Address Distribution.
030-300536 Rev. A 158 August 2007 User Guide VersaLink Wireless Gatewa y ( Model 7500 ) IP Address Distribution IP Address Distributi on Factory Default = Pri vate LAN This setting allows VersaLink to automatical ly assign IP addresses to lo cal devices connected to the LAN.
030-300536 Rev. A 159 August 2007 User Guide VersaLink Wireless Gatewa y ( Model 7500 ) If you selected Off , the following screen will appear. Click Apply to save the settings. If you click Reset , the screen will refresh, and the previously sav ed settings will remain active.
030-300536 Rev. A 160 August 2007 User Guide VersaLink Wireless Gatewa y ( Model 7500 ) 16.18 Private LAN—Configuring NAT In the Advanced scree n , click Private LAN . The following screen will appear. Pr ivate LAN allows you to set up a network behind your Router.
030-300536 Rev. A 161 August 2007 User Guide VersaLink Wireless Gatewa y ( Model 7500 ) If the settings you have entered in the Private LAN Configuration screen are incorrect, the following warning messages may be displayed in pop-up screen s. If this occu rs, check t he settings i n the Private LAN Configuratio n screen.
030-300536 Rev. A 162 August 2007 User Guide VersaLink Wireless Gatewa y ( Model 7500 ) Public LAN Public LAN DHCP Server Enable Default = Disabled (deselected) If this box c ontains a c heck mark, this enables D HCP addre sses to be served from the Public L AN pool.
030-300536 Rev. A 163 August 2007 User Guide VersaLink Wireless Gatewa y ( Model 7500 ) If you clicked the Public LAN Enable box, th e following screen will appear. After you have made changes to this screen, click Apply to allow the settings to take effect.
030-300536 Rev. A 164 August 2007 User Guide VersaLink Wireless Gatewa y ( Model 7500 ) 16.20 RIP Configuration In the Advanc ed screen, click RIP Configuration . The following screen will appear. RIP (Routi ng Interface Protocol ) is a dy namic inter- network r outing pr otocol pri marily used in interi or routi ng environm ents.
030-300536 Rev. A 165 August 2007 User Guide VersaLink Wireless Gatewa y ( Model 7500 ) RIPv1 or RIPv 2 Transmit The ver sion of RIP to be trans mitted. (WAN si de RIP never transm its) Possible Responses: None RIPv1 RIPv1 Compatible RIPv2 RIPv2 Authentication Mod e If using RIP V2, you must select the type of authentication to use.
030-300536 Rev. A 166 August 2007 User Guide VersaLink Wireless Gatewa y ( Model 7500 ) 17. SYSTEM MONIT ORING If you click System Monitoring in the top navigational menu, a warning screen will display the following message: Any changes made in this sect i on may affect your devic e’s performance and configuration.
030-300536 Rev. A 167 August 2007 User Guide VersaLink Wireless Gatewa y ( Model 7500 ) 17.1 Gateway Status If you clicked Yes in the warning screen, the fo llowing Gateway Stat us screen will appear. This screen allows you to view details about your Router.
030-300536 Rev. A 168 August 2007 User Guide VersaLink Wireless Gatewa y ( Model 7500 ) 17.2 Advanced Status If you select System Mo nitoring in the top navigational menu, and th en click Advanced Sta.
030-300536 Rev. A 169 August 2007 User Guide VersaLink Wireless Gatewa y ( Model 7500 ) 17.2.1 System Logging In the Advanced Status screen, click System Log ging . Th e following screen will be displayed. At the Logs dro p-down menu, do any of the fo llowing: • Select All to list both Connection an d System logs.
030-300536 Rev. A 170 August 2007 User Guide VersaLink Wireless Gatewa y ( Model 7500 ) If you selected All from the Logs drop-down m enu, the following screen w ill appear. Yo u may need to scroll down to the bottom of the log s screen to view all the logged events.
030-300536 Rev. A 171 August 2007 User Guide VersaLink Wireless Gatewa y ( Model 7500 ) To save a copy of the lo gs to a locatio n on your c omputer, i n the System Log page, click Printable Fo rmat. The following screen will appear. Click File > Save As from the m enu optio ns, and then sa ve the fi le to the desi red location.
030-300536 Rev. A 172 August 2007 User Guide VersaLink Wireless Gatewa y ( Model 7500 ) 17.2.2 Full Status/System-wide Monitoring of Connections In the Advanced Status screen, click Full Status/System-wide Mo nitoring of Connection. The following screen will be displayed.
030-300536 Rev. A 173 August 2007 User Guide VersaLink Wireless Gatewa y ( Model 7500 ) Full Status/System-wide Monitoring of Connections Name A descriptor used to ide ntify the R outer’s connecti o.
030-300536 Rev. A 174 August 2007 User Guide VersaLink Wireless Gatewa y ( Model 7500 ) 17.2.3 Traffic Monitoring In the Advanced Status screen, click Traffic Monitoring.
030-300536 Rev. A 175 August 2007 User Guide VersaLink Wireless Gatewa y ( Model 7500 ) Traffic Monitoring Stats Represents the statistics for each interface type: ATM, Ethernet, or USB Packet Inform ation for The packet inform ation for the interface.
030-300536 Rev. A 176 August 2007 User Guide VersaLink Wireless Gatewa y ( Model 7500 ) 17.2.5 Advanced LAN Statistics In the Advanced Status screen, click Advanced LAN Statistics. The following screen will be displayed. After you have viewed the details in this page, click Close to return to th e Advanced Status screen.
030-300536 Rev. A 177 August 2007 User Guide VersaLink Wireless Gatewa y ( Model 7500 ) 17.2.6 QOS Status In the Advanced Status screen, click QOS Status . The following screen will be displayed. Click the Clea r button to clear all counts and statistics (n ot just latency counts).
030-300536 Rev. A 178 August 2007 User Guide VersaLink Wireless Gatewa y ( Model 7500 ) 17.2.7 Transceiver Statistics In the Advanced Status screen, click Transceiver Statistics. The following screen will be displayed. After you have viewed the details in this page, click Close to return to th e Advanced Status screen.
030-300536 Rev. A 179 August 2007 User Guide VersaLink Wireless Gatewa y ( Model 7500 ) 18. POR T FOR W ARDING SER VICES For your con venience, Ve rsaLink sup ports protoc ols for Ap plications, Ga mes, and VP N-specific pr ogram s. The following chart provides port/pro tocol information for the suppo rted services.
030-300536 Rev. A 180 August 2007 User Guide VersaLink Wireless Gatewa y ( Model 7500 ) GameSpy Onli ne UDP 3783 UDP 6515 TCP 6667 UDP 12203 TCP/UDP 13139 UDP 27900 UDP 28900 UDP 29900 UDP 29901 Ghost.
030-300536 Rev. A 181 August 2007 User Guide VersaLink Wireless Gatewa y ( Model 7500 ) MSN Game Zone 6667 TCP, 28800-2900 0 TCP MSN Game Zone (DX 7 & 8 play) 6667 TCP, 6073 TCP, 28800-2 9000 TCP, 47624 TCP, 2300-2400 TCP/UDP This service will open up ports for both traffic directions.
030-300536 Rev. A 182 August 2007 User Guide VersaLink Wireless Gatewa y ( Model 7500 ) UDP Unreal Tour nament serve r 7777 (default g ameplay po rt) 7778 (serv er query po rt) 7779,7779+ are allocated dynamically for each helper UdpLink objects, including UdpS erverUplin objects.
030-300536 Rev. A 183 August 2007 User Guide VersaLink Wireless Gatewa y ( Model 7500 ) 19. TECHNICAL SUPPORT INFORMA TION Contact your Intern et service pr ovider for technical support.
030-300536 Rev. A 184 August 2007 User Guide VersaLink Wireless Gatewa y ( Model 7500 ) 21. SOFTW ARE LICENSE AG REEMENT READ THE TERMS AND CONDITION S OF TH IS LICENSE AGREEMEN T CAREFULLY.
030-300536 Rev. A 185 August 2007 User Guide VersaLink Wireless Gatewa y ( Model 7500 ) 6. Governing Law. This License Agreement shall be construed and go verned in accordance with the laws of the State of Illinois.
030-300536 Rev. A 186 August 2007 User Guide VersaLink Wireless Gatewa y ( Model 7500 ) 22. PUBLICA TION INFORMA TION Verizon® Ve rsaLink™ Wire less Gateway (Mo del 7500) Document Part Number 030-30 0536 Rev. A © 2007 Verizon All rights reserved. All trademarks and registere d trademarks ar e the property of their respective owne rs.
An important point after buying a device Verizon 7500 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Verizon 7500 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Verizon 7500 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Verizon 7500 you will learn all the available features of the product, as well as information on its operation. The information that you get Verizon 7500 will certainly help you make a decision on the purchase.
If you already are a holder of Verizon 7500, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Verizon 7500.
However, one of the most important roles played by the user manual is to help in solving problems with Verizon 7500. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Verizon 7500 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
