Instruction/ maintenance manual of the product CB-U200GNA Vantec
Go to page of 8
USB 2.0 to Gigabit Ethernet Adapter User Manual Model: CB-U200GNA All brand names and trademarks are properties of their respective owners www .vantecusa.
CB‐U200GNA Page2 Contents: Chapter 1: Intr oduction ......................................................3 1.1 Product In troduction ....................................................3 1.2 Features ...............................
CB‐U200GNA Page3 Chapter 1: Introduction 1.1 Prod uct Int r od uction This USB 2.0 to Gigabit Ethern et Adapter add a single RJ-45 Ethernet networking port to a USB en abled computer system with link speeds up to 1000 Mbps**. Backwards comp atible with USB 1 .
CB‐U200GNA Page4 z LEDs indicate the status of Power status and Ethernet connection z Support W indows® XP/V ista/7/8 ( 32/64 bit); Mac OS 10 .5 or later 1.3 Syste m Requirement s z W indows® XP/V ista/7/8 (32/64 bit); Mac OS X 10.
CB‐U200GNA Page5 2. Connect one end of your network cable into the RJ45 port of USB 2.0 to Gigabit Ethernet Adapter . 3. Connect the other end of the network cable into an av ailable Ethernet port on your router , switch, or any other networking device.
CB‐U200GNA Page6 2.2.2Inst all ationf orMacOSX 1. Insert the provided CD in to your CD-ROM drive. 2. Navigate to “CD-DriveCB-U200GNAMac” folder . 3. Double click the “LAN7500-1.0.2 . pkg” file (For Mac OS X 10.6/10.
2. Entry “Network adapters” item , and you can read “LAN7500 USB 2.0 to Ethernet 10/100/1000 Adapter” in th e Device Manager . 2.3.2V erifyingfo rMacOSX 1. Choose About this Mac from the Apple menu. 2. Click on More Info… 3.
**Note: The stated transmissi on rate of this device is 1Gbps. This is the theoretical data rate and actual rate may vary . It is dependent on the PC's OS, hardware, Network traf fic, switches, routers and USB traf fic/data/capacity on the USB bus .
An important point after buying a device Vantec CB-U200GNA (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Vantec CB-U200GNA yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Vantec CB-U200GNA - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Vantec CB-U200GNA you will learn all the available features of the product, as well as information on its operation. The information that you get Vantec CB-U200GNA will certainly help you make a decision on the purchase.
If you already are a holder of Vantec CB-U200GNA, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Vantec CB-U200GNA.
However, one of the most important roles played by the user manual is to help in solving problems with Vantec CB-U200GNA. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Vantec CB-U200GNA along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
