Instruction/ maintenance manual of the product 2827 United States Stove
Go to page of 10
Owners Manual Model 2827 WONDERCOAL AUTOMATIC COAL BURNING CIRCULATOR HEATER United States Stove Company 227 Industrial Park Rd. South Pittsburg, TN 37380 (423) 837-2100 www.USSTOVE.com SAFETY NOTICE: If this heater is not properly installed, a house fire may result.
T OOLS AND MA TERIAL NEEDED TOOLS Pencil 6 Foot Folding rule or tape Tin Snips Drill, hand or electric Drill bit, 1/8" dia. (for sheet metal screws) Gloves Screwdriver (blade-type) 5/16" Nut Driver or 5/16" Socket w/Ratchet MATERIALS Chimney Connection- 6" Dia.
1. 2. 3. 4. 5. 6. 7. 8. 18 3 RULES FOR SAFE INSTALLATION AND OPERATION Read these rules and the instructions carefully. SAFETY NOTICE: If this heater is not properly installed, a house fire may result. For your safety, follow the installation directions.
LOCA TING THE HEA TER AS A LOCATION IS SELECTED, KEEP THE FOLLOWING IN MIND: 1. The chimney connection should be as possible. The heater must have its own chim- ney.
CHIMNEY CONNECTION Two basic types of chimneys are approved for use with solid fuel: Factory-built and masonry. Factory-built chimney must comply with UL103HT standard. Do not expect your stove or furnace to create draft. Draft is not a function of the appliance.
CAUTION: NOT ALL FIREPLACES ARE SUITABLE FOR INSTALLATION OF A COAL HEATER. REPAIR PARTS AUTOMATIC COAL BURNING CIRCULATOR HEATER MODEL NUMBER 2827 (SEE PAGE 16) KEY NO.
FIREPLACE INSTALLATION Connection of the stovepipe directly into the existing masonry chimney over the fireplace opening is the only approved method. This installation performs bet- ter, yielding easy to clean and inspect for creosote. Before beginning this type of installation plan carefully; a high de- gree of skill is required to insure safety.
SER VICE HINTS Do not expect a heater to draw. It is the chimney that creates the draft. Smoke spillage into the house or excessive build-up of water or creosote in the chimney are warnings that the chimney is not functioning properly. Possible causes are: 1.
SUGGESTIONS FOR BURNING ANTHRACITE COAL 1. With coal it is important to maintain a clean chimney. The chimney connector and chimney should be inspected at least twice monthly during heating season. 2. Keep the grate clear of ash and cinders. Use the shaker grate to keep the ashes from building up in the firebox.
OPERATING INSTRUC- TIONS FUEL Egg size Bituminous coal for residential furnaces, or any of the specially pack- aged fireplaces coals can be used. Coal with a low ash content (2% to 6%) is recommended. NOTE: Store coal in a dry, well-venti- lated area.
An important point after buying a device United States Stove 2827 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought United States Stove 2827 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data United States Stove 2827 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, United States Stove 2827 you will learn all the available features of the product, as well as information on its operation. The information that you get United States Stove 2827 will certainly help you make a decision on the purchase.
If you already are a holder of United States Stove 2827, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime United States Stove 2827.
However, one of the most important roles played by the user manual is to help in solving problems with United States Stove 2827. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device United States Stove 2827 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
