Instruction/ maintenance manual of the product TRUTHB2030A Behringer
Go to page of 9
TRUTH B2030A/B2031A Users Manual ENGLISH Version 1.0 August 2003.
2 TRUTH B2030A/B2031A This symbol, wherever it appears, alerts you to the presence of uninsulated dangerous voltage inside the enclosurevoltage that may be sufficient to constitute a risk of shock. This symbol, wherever it appears, alerts you to important operating and maintenance instructions in the accompanying literature.
3 TRUTH B2030A/B2031A B2030A/B203 1A TRUTH High-Resolution, Active 2-Way Reference Studio Monitor s Ultra-linear frequency response from 50 Hz to 21 kHz with individual frequency diagrams s Built-in 7.
4 TRUTH B2030A/B2031A 1. INTRODUCTION TABLE OF CONTENTS 1 . INTRODUCTION ......................................................... 4 1.1 Before you get started ................................................... 5 1. 1.1 Shipment .....................
5 TRUTH B2030A/B2031A 2. CONTROL ELEMENTS 1.1 Before you get started 1.1.1 Shipment The B2030A/B2031A was carefully packed at the factory to assure secure transport. Should the condition of the cardboard box suggest that damage may have taken place, please inspect the unit immediately and look for physical indications of damage.
6 TRUTH B2030A/B2031A 3. APPLICATIONS + The TRUTH should be the last device in the signal chain to be switched on and the first to be switched off. This way, loud switch-on thumps that can occur when powering other equipment on or off can be avoided.
7 TRUTH B2030A/B2031A 3. APPLICATIONS + The TRUTH is capable of producing high volume levels. You should mix your recordings at moderate levels, so as to avoid listening fatigue and hearing impairment.
8 TRUTH B2030A/B2031A It might be necessary to insert an equalizer between console and speaker, in particular, if you prefer extreme setups or sound images. The BEHRINGER ULTRACURVE PRO DEQ2496 has proven its usefulness in practice, as it is not only a simple equalizer but also features a real-time analyzer.
9 TRUTH B2030A/B2031A 6. WARRANTY 6. WARRANTY § 1 WARRANTY CARD/ONLINE REGISTRATION To be protected by the extended warranty, the buyer must complete and return the enclosed warranty card within 14 days of the date of purchase to BEHRINGER Spezielle Studiotechnik GmbH, in accordance with the conditions stipulated in § 3.
An important point after buying a device Behringer TRUTHB2030A (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Behringer TRUTHB2030A yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Behringer TRUTHB2030A - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Behringer TRUTHB2030A you will learn all the available features of the product, as well as information on its operation. The information that you get Behringer TRUTHB2030A will certainly help you make a decision on the purchase.
If you already are a holder of Behringer TRUTHB2030A, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Behringer TRUTHB2030A.
However, one of the most important roles played by the user manual is to help in solving problems with Behringer TRUTHB2030A. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Behringer TRUTHB2030A along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
