

version 5
User's Guide

©2009 Shinano Kenshi Co., Ltd.

FCC NOTICE
Declaration of Conformity Model Number: PTX1/PRO Trade Name: PLEXTALK Responsible party: Shinano Kenshi Co., Ltd. Address: 1078, Kami-maruko, Ueda-shi, Nagano-ken 386-0498 JAPAN
This device complies with Part 15 of the FCC Rules: Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

This digital apparatus does not exceed the Class B limits for radio noise emissions from digital apparatus set out in the Radio Interference Regulations of the Canadian Department of Communications.
This class B digital apparatus complies with Canadian ICES-003. Cet appareil numerique de la classe B est conforme a la norme NMB-003 du Canada.


This chapter contains important information regarding copyright, licenses and trademarks. It also outlines the restrictions, which apply when using the PLEXTALK for copying or recording digital sound. You are strongly advised to read this chapter thoroughly before continuing.
Shinano Kenshi reserves the right to modify the products described in this guide at any time without prior notice.
Shinano Kenshi makes no representation or warranties with respect to the contents hereof and specifically disclaims any implied warranties of merchantability or fitness for any particular purpose. Further, Shinano Kenshi Co., Ltd. reserves the right to revise this guide and to make changes in its content, without obligation to notify any person or organization of such revision or change.
This guide is copyright. It may not be copied, photocopied, translated, or reduced to any electronic medium or machine-readable form without prior permission from Shinano Kenshi.
Manual copyright 2009 Shinano Kenshi Co., Ltd.
All licenses and trademarks are the property of their respective owners.
Before using your PLEXTALK, you should review the following important information to ensure that you understand the legal restrictions that apply to its use for certain operations.
This PLEXTALK device is designed to help you record and reproduce sound works, to which you own the copyright, or where you have gained permission from the copyright

owner or the rightful licenser. Unless you own the copyright or have gained the appropriate permission from the copyright owner or the rightful licenser, your unauthorized recording, reproduction or distribution thereof, may result in severe civil and criminal penalties under copyright laws and international copyright treaties. If you are uncertain about your rights, contact your legal advisor.
Under no circumstances will Shinano Kenshi be responsible for the consequences of any illegal copying performed using this PLEXTALK recorder.
Copies of Music CDs are for individual enjoyment and, under the Copyright Act, cannot be used otherwise, without the authorization of the copyright holder.

2.1. Terminology and conventions used
This section details the terminology and conventions used throughout this guide. The details are as follows:
Below is a list of all the items you should find in the box with your PLEXTALK. Please make sure that all items are included. If there are any missing items, please contact your local agent.
1 PLEXTALK Linio 1 Mask 1 AC adaptor 1 User's Guide CD 1 Quick Reference guide 1 Safety Instruction guide
This section describes the physical look of the PLEXTALK and the layout of the keys and other controls to enable you to locate them when referred to in later chapters. The names and main purposes are also detailed here.

Holding the unit carefully, take a few moments to locate the top and bottom surfaces. The top has 27 rubber keys on it, whereas the bottom has only 5 rubber feet, four of which are near the corners and one which is the long straight foot.
Locate the perforated surface of the speaker grill of the PLEXTALK. Keep the feet downwards and rotate it until the speaker grill is at the upper right. The PLEXTALK should now be set up in its normal operating position. You can confirm this by feeling the longest side is closest to you. There should be a narrow, but noticeable, straight dip in this edge. It is the CD slot.
The PLEXTALK has 27 rubber keys on the top surface. These are grouped in 5 blocks - a column of 4 keys on the left side, a rectangular block of 12 keys in the center, a row of 3 keys below the rectangular block, a row of 3 keys above the rectangular block and a group of 5 keys on the right side.
In the column of four keys on the left side, the top key is an ellipse shaped key and the bottom key is a triangle shaped key. The remaining two keys in the centre are diamond shaped keys.
From top to bottom, the four keys are:
The rectangular block of 12 keys is generally called the Number key and is located at the center of the top surface. It is laid out exactly like a push button telephone keypad with 4 rows of 3 keys. The number 5 key has a small raised dot on it to help you locate it. The Hash key, which is located at the bottom right of the Number Pad, is used for confirming, so it will be called the Enter key throughout this guide. Similarly, the Star key, which is located at the bottom left of the Number key, is used to cancel, and will be called the Cancel key.
Some of the keys have secondary functions and these are listed below:

Underneath the Number key is a row of 3 keys. The two outside keys are semi circular in shape. The center key is rectangular in shape and has a distinctive recessed top surface for easy location. From left to right, the names and the uses of these three keys are as follows:
Above the Number key is a row of 3 keys. The two outside keys are vertically long ellipses in shape and the center key is a larger ellipse in shape. They are divided into top and bottom segments at the center. From left to right, the names of these keys are as follows:
The last group of keys on the top surface is the 5 keys on the right hand side. The key, which is located in immediate right of the Number 3 or 6 key, is the Information key. It is ellipse in shape. The key, which is located immediately to the right of the Fast Forward key, is the Title key. It is divided into the right and left segments at the center. The right side is called "Next Title key", the left side is called "Previous Title key." The use of these keys are as follows:
The other three keys are arranged linearly on the right side of the unit. The top key is a small round shape and the bottom key is a small square shape. The center of the two keys is a larger round shaped key, which has a slight depression. From top to bottom, the three keys are:

The CD Insertion and Ejection Slot is located at the front of the unit. Insert your DAISY book CD, music CD or MP3CD into the slot. Once the CD has been inserted, the CD will be taken into the unit automatically.
On the left side of the unit there are three items. From front to back, there are the SD card slot, the headphone jack and the USB slot. The SD card slot is for both SD and SDHC cards. The USB slot can be used for USB flash memory.
There are two items on the back face of the unit. Nearest to the back left corner, in a square shaped housing, is the LAN cable connector. In the center is a small round hole in a square shaped housing. This is the DC input terminal, which is the socket to take the AC power supply.
There is a battery cover on the bottom surface. The battery cover is fixed with a screw. To replace the battery, remove the screw and open the battery cover, then pull out the battery.
In order to charge the internal battery, you need to connect the PLEXTALK to the mains supply. Do this as follows:

2.5.1. Unit care
Carefully wipe any dust and dirt from PLEXTALK with a soft cloth that has been slightly dampened with a diluted, neutral detergent, then wipe dry with a cloth.
In order to get the most out of your rechargeable battery, you should take careful note of the following points:
In order to maintain battery performance, the following procedure should be carried out every six months:

A symbol mark called "crossed-out dustbin mark" is printed on the surface of the battery.

This symbol mark is according to the directive 2006/66/EC. This symbol means that batteries and accumulators, at their end-of-life, should be disposed of separately from regular municipal waste. If a chemical symbol is printed beneath the symbol shown above, this chemical symbol means that the battery or accumulator contains a heavy metal at a certain concentration listed below.
These substances may cause serious hazards to humans and the global environment if not cared in an appropriate manner. In the European Union there are separate collection systems for used batteries and accumulators. Please dispose of batteries and accumulators properly at your local community waste collection or recycling center. Our product is designed and manufactured with battery and accumulator components which can be recycled or reused.
To turn the unit on or off, do the following:

As its name implies, the Key Describer function allows the user to get a description of any key on the PLEXTALK.
Key Lock can be used to lock the keys and controls so that they can't be accidentally operated.
To insert the SD card, do the following:
To eject the SD card, do the following:

CAUTION: PLEXTALK's SD card slot is only compatible with SD or SDHC cards. Inserting other memory cards, such as a Memory Stick or Multimedia Card, will cause a malfunction and should not be used. Note: SD cards have a locking switch that enables you to protect your data if you want. This is located on the longer side of the card away from the cut off corner. If the switch is towards the leading edge of the card, you will be able to back up and delete titles. If the switch is away from the leading edge, your data will be protected.
To insert the USB memory, do the following:
To eject the USB memory, do the following:
To insert a CD into the PLEXTALK, do the following:
To eject a CD, do the following:

A number of the features of PLEXTALK are accessed through the built in menu system. This chapter aims to give you an understanding of how the menu is structured and how you access it.
At the highest level there is the Main Menu which has 6 items. These are:
To navigate around the menu, use the following methods:

4.1. Selecting your preferred synthetic voice
You are given the choice of two synthetic voices for the text to speech voice. To select your preferred text to speech voice, do the following:
To set the date and time for the internal clock, do the following:

When the PLEXTALK is busy, such as when it is accessing a media, it plays a sound to indicate that it is carrying out that action. To select your preferred waiting sound, do the following:

5.1. Battery low warning
When the PLEXTALK is operating on battery power and the power level drops to a level where it needs to be recharged, the PLEXTALK will say "Low battery." Player will shut down in one minute. If you wish to continue to use the PLEXTALK, you need to plug in the AC adaptor.
In order to save battery power, the PLEXTALK will automatically shut down after 15 minutes of inactivity even if the battery level is still OK.
If for any reason, PLEXTALK will not shut down or you are not able to navigate with any keys, you can try using the compulsory power off function, as an alternative to remove the battery.
To use the compulsory power off feature, press and hold down the Sleep timer key and Power button together for more than 10 seconds. PLEXTALK should shut down.
The Sleep Timer feature enables you to specify an amount of time, after which, PLEXTALK will shut down.
To set the sleep timer, do the following:

To cancel the sleep timer, do the following:

The PLEXTALK is able to play following formats.
To start or stop playback, do the following:
The fast rewind and fast forward features use the Rewind key and Fast Forward key either side of the Play/Stop key.
When you play a DAISY book with audio or Audio file, as you hold down the Rewind or Fast Forward key, the fast rewind or fast forward will skip 1 minute, 2 minutes, 3 minutes and so on. If the key is released before the "1 minute" option is spoken, playback will start

at the place the key is released. If the key is released after this point, the fast rewind or fast forward will continue until the Play/Stop key is pressed to stop the process.
The volume can be set on a scale from 0 to 25, in steps of 1, with 0 being silent and 25 being the highest possible setting.
The volume of the guide speech can either be adjusted in conjunction with the playback volume or it can be adjusted independently. To set the guide volume independently, do the following:
There are 12 speed settings ranging from -3 to +8, which can be adjusted 1 level at a time. The normal speed is at the 0 position. Minus 3 is half of the normal speed. Plus 8 is double speed when using the synthetic voice. In other cases, plus 8 is triple speed.

There are 13 tone settings ranging from -6 to +6, which can be adjusted 1 level at a time.
One of the most useful features of PLEXTALK is the ability to choose how you want to navigate. To use the Navigation Menu, do the following:
To select a title, do the following:

PLEXTALK supports CD, SD card, USB device, Internal memory, Bookshelf and Service Announcement as media. If you press the Next Title key at the last title in a media, PLEXTALK will move to the first title of the next media. If you press the Previous Title key at the first title in a media, PLEXTALK will move to the last title of the previous media.
PLEXTALK groups titles into these categories: "DAISY title", "Music", "Text", "Audio book", "Podcast" and "Webradio." To select a title by "Category", do the followings:
< Without COVER > In addition to the "Category", you can select a title by "Folder" or "Media". Do the following:
To select a specific title by the Number Pad from the "Category" level, do the following:

To get a variety of information about the current media and title, do the following:
You can get a range of information on the current status, about heading, page, bookmark and so on. Whether PLEXTALK is playing or not, do the following:
To select the shuffle and repeat settings from playback modes, do the following:

6.12.1. Types of bookmark
There are 2 types of bookmark you can use in PLEXTALK as follows:
To insert a Numbered Bookmark, whether PLEXTALK is playing or not, do the following:
Once you have entered bookmarks into a title, album or file, a "Bookmark" option will become available on the Navigation Menu. In order to navigate to the next bookmark with a lower or higher number, do the following:

To jump to a Numbered Bookmark, whether PLEXTALK is playing or not, do the following:
To clear a Numbered Bookmark, the procedure is as follows:

This chapter covers additional features that can be used when you are playing a DAISY title.
There are 2 ways of navigating to headings within a DAISY title. You can either go to headings direct or you can move through the available headings one at a time.
To navigate headings sequentially, using heading levels, do the following:
To go direct to a specific heading, do the following:
7.2. Moving to the beginning or end of a DAISY title < Without COVER >
To move to the beginning of a DAISY title, do the following:

To move to the end of a DAISY title, do the following:
Navigating to pages is very similar to heading navigation.
To navigate pages sequentially, do the following:
To go direct to a specified page, do the following:
To move backwards or forwards a group at a time, do the following:

To move backwards or forwards one phrase, do the following:
To skip by 10 minutes or 30 seconds at the Audio DAISY formats, do the following:
7.7. Navigating by screen, paragraph, line, sentence, spell, word or character in case of DAISY text mode < Without COVER >
In addition to DAISY navigation options, DAISY text file will always give you the navigation options "Screen", "Paragraph", "Line", "Sentence", "Spell", "Word" and "Character".

These options will automatically appear on the Navigation Menu when you access this type of file. To navigate by any of these options, the process is identical as follows:
You can navigate by a percentage of the file. To navigate by percentage, do the following:
You can select from 2 playback modes when using a DAISY title. The available options are as follows:
Multimedia DAISY is DAISY format that contains both audio and text files. You can select which format is played if you play Multimedia DAISY.


This chapter covers features that are specific to playing Audio Files or Music CDs. PLEXTALK is able to play following types of audio file:
CAUTION: PLEXTALK may not be able to play a Music CD that is not compliant with the CD digital audio (CD-DA) standard, such as copy-protected Music CDs. Note: WMA files on CDs are unable to play. Note: The maximum number of files that can be stored in a media is 6000. Files in excess of 6000 are not recognized. The maximum number of folders is 1024, including a root folder. Folders in excess of 1024 are not recognized.
You can either go to tracks direct or you can move through the available tracks one at a time.
To navigate tracks sequentially, do the following:

To go direct to a specified track, do the following:
To move to the beginning of an album, do the following:
You can either go to albums direct or you can move through the available albums one at a time.
To navigate albums sequentially, do the following:
To go direct to a specified album, do the following:
To skip by 10 minutes or 30 seconds at the Audio files, do the followings:

When playing Audio Files, you can select a number of different playback modes. The available options are as follows:
8.6. Announcing albums and tracks by name or number < Without COVER >
When navigating albums or tracks, PLEXTALK announces albums and tracks by name or number. Either setting to read the name or the number can be selected. For this setting, do the following:

PLEXTALK is able to play the Text Files by using synthetic voices. PLEXTALK supports following types of text files:
9.1. Navigating by screen, paragraph, line, sentence, spell, word or character < Without COVER >
A Text File will always give you the navigation options "Screen", "Paragraph", "Line", "Sentence", "Spell", "Word" and "Character". These options will automatically appear on the Navigation Menu when you access this type of file. For Word and HTML files that have been coded with headings, you will be given an additional navigation option on the Navigation Menu. This will be called "Level".
To navigate by any of these options, the process is identical as follows:
To navigate paragraphs sequentially, do the following:
In Text Files, you can navigate by a percentage of the file. To navigate by percentage, do the following:

When playing Text Files, you can select a preferred playback mode. The available options are as follows:

PLEXTALK is able to play the "Audio Book" format. PLEXTALK supports the following types of audio files:
Create “Audible" folder at the root of SD card and store the “.aa” files in this folder. If there are other types of audio files than “.aa” in the “Audible" folder, PLEXTALK does not recognize these files. PLEXTALK handles an “.aa” file as one title.
Meanwhile, you should create "PlexAudioBook" folder at the root of SD card and store the Audio Book files other than ".aa" in this folder.
All audio files stored in "PlexAudioBook" folder are played as “Audio Book”, not as “Music”. PLEXTALK handles a folder in “PlexAudioBook” folder as one title.
Navigations of audio books are similar to Music files. Refer to section 8 "Playing Audio Files or Music CDs" for details.
Note: PLEXTALK recognizes “.aa” files in folders other than the “Audible" folder. But it is recommended that you should store the “.aa” files in the “Audible" folder. Note: PLEXTALK does not recognize “.aa” files in "PlexAudioBook” folder. Note: “.aa” audio file support heading and percent navigation. Note: Two playback modes, "Normal playback" and "Repeat title" options, can be selected from shuffle and repeat settings. < Without COVER >

11.1. General backup information
Before backing up any data, the following points should be noted:
To backup a title or album from CD to other media, do the following:

To back up from a media to other media, do the following:
For the range of available sample rates or bit rates, the approximate backup times are given below:
Backing up about 50 minutes of audio from a music CD to SD card:

12.1. Deleting a title
PLEXTALK enables you to delete a title, album or text file. To delete a title, do the following:
PLEXTALK allows you to erase an SD card, USB device and Internal Memory as many times as you want. To erase an SD card, USB device or Internal Memory, do the following:


PLEXTALK has a network capability using wired or wireless LAN. If a LAN cable is connected to PLEXTALK when turning on, PLEXTALK tries to connect to the wired network. If a LAN cable is not connected, PLEXTALK tries to connect to the wireless network. This chapter shows you how to configure the network settings and connect to the network.
13.1.1. Connecting LAN cable
At the back face of the PLEXTALK, AC power terminal is located at the center and LAN cable connection is located at the right. Connect a LAN cable to the LAN cable terminal. When you connect a LAN cable, PLEXTALK connects to the wired network. When you disconnect a LAN cable, PLEXTALK changes to connect to the wireless network.
If PLEXTALK cannot connect to the wired network automatically, you have to configure the IP address and so on manually. To set up wired network connection manually, do the following:

13.2.1. Enable wireless network device
To enable the wireless network device, do the following:
To confirm a currently available wireless network and connect to the network, do the following:


"Enable" and press the Enter key. Then enter the address of the proxy server and press the Enter key. And then enter the port number of the proxy server and press the Enter key. •PLEXTALK tries to connect to the wireless network. When connection is successful, the configured settings are stored in the PLEXTALK and the menu automatically closes. When the connection fails, the PLEXTALK automatically returns to the menu to select an available wireless network.
Note: Once you have configured the network settings, you need not configure the settings every time. Note: Network settings such as a Network name (SSID) and a security mode depend on each network. Configure the network settings following your network environment. Note: If WEP is selected as security mode, a password is 5, 10, 13, or 26 characters. For security modes besides WEP, a password is between 8 and 64 characters. Note: Refer to the Section 15, "Entering Text" for more detail on entering text.
13.3.1. Confirming network information
Information about current network connection can be confirmed by this menu.
If connected to a wired network, the following information is available:
If connected to a wireless network, the following information is available:

If PLEXTALK does not connect to the network, the following information is available.
To confirm the network information, do the following:
PLEXTALK can configure multiple network settings at once by loading a network setting file called "NetworkSetting.ini". You can create the setting file on your personal computer with the application software. The software and the manual are available at PLEXTALK web site. http://www.plextalk.com/ Store this setting file into the root of the SD card or USB memory, then load the settings. To load the network setting file, do the following:

Network settings in the PLEXTALK can be saved to SD card or USB memory for backup purpose. The setting file is saved in the root of SD card or USB memory. To save the settings, do the following:
To add wireless network setting, do the following:

In the "Change or delete wireless network setting" menu, following three options are available:
To change or delete wireless network setting, do the following:
If you select "Change the priority and automatic connection settings":

If you select "Change wireless network setting":
If you select "Delete wireless network setting":
The network settings can be reset to factory default. The execution of the menu brings the following result:
To reset the network settings, do the following:

DAISY Online is the library system which lends DAISY books and distributes Service Announcements to users via Internet. These services are called "Online service". There are a lot of "Online service providers" and the services contents differ from each service provider.
To use DAISY Online service, register as a member of the online service first. Then configure the settings for DAISY Online player such as the PLEXTALK. This section describes the Online service setting, method to borrow or return titles and method to listen to "Service Announcements".
To receive DAISY Online service, you have to register as a member of the online service provider. After registration, the online service provider will give you a user ID and a password.
Configure the ID and password into the PLEXTALK after registration. There are two methods for configuration.
Ask the online service provider which method you have to choose.
Obtaining the method of the online service setting file depends on each online service provider. For example, you may obtain the setting file from the provider's web site. Ask the online service provider how to obtain the online service setting file.
After obtaining the online service setting file, load the file into PLEXTALK. To load the online service setting file, do the following:

You can register service provider's name, user ID and password in PLEXTALK manually. Do the following:

Note: Refer to the Section 15, "Entering text" for more detail about entering text. Note: If you change the user ID or password, you should enter new user ID or password which is provided from the online service provider. Note: If the service provider does not allow both "steaming" and "download", the online playback mode setting is not available. Note: If you select "streaming", downloading title will be aborted. However, downloaded files will not be deleted. Note: If you select "downloading", all the "Issued titles" will be downloaded.
If you withdraw the online service provider, delete the setting of the online service provider. Do the following:
You can select an announce voice by "recorded voice" or "synthetic voice" when using Bookshelf, Announcement or Online service menu. If you select "Set priority to Audio Label" on a priority basis, PLEXTALK announces "recorded voice" if there is recoded voice. If there is not recorded voice, it announces synthetic voice. If you select "Text Label only", PLEXTALK announces by synthetic voice all guidance. For this setting, do the following:

An available title list will be sent from the online service provider via the Internet. The available title list is called "new titles." Select the title you want to listen to from the "new titles". When you select a title from "new titles" and press the Play/Stop key, the selected title is transferred to the category called "issued titles." "Issue" means that you borrow the title from the online service provider.
"Bookshelf" consists of two categories which are "new titles" and "issued titles." PLEXTALK handles "bookshelf" as a "media" such as SD card or USB device. If your PLEXTALK has registered multiple online service providers, each bookshelf appears as an individual media.
To get titles from the online service provider to bookshelf, the following methods are available.
Some online service providers do not provide the methods which are shown above. Ask the online service provider in detail how to get titles to your bookshelf.

To play a title in the bookshelf, do the following:
The operations such as fast forward, fast rewind, heading navigation for the titles in bookshelf are the same as operating titles on the SD card.
There are two options to play the title, which are streaming and downloading. On streaming, a part of audio of the title is transferred to PLEXTALK and it plays the audio data. To play the title by download, PLEXTALK downloads the entire title then plays it.
To download a title, do the following:
Note: Some online service providers provide only streaming. In this case, downloading is not available. Note: If you want to download several titles, repeat the procedures shown above. Note: Press the 9 key during downloading to abort the downloading. Note: Download may take a long time. You can play another title while the title is being downloaded. Note: Download time depends on network environment and size of the title.

To return a title, do the following:
< Without COVER > Bookshelf key enables the same operation as the Eject key.
If there are many titles in your Bookshelf, switching the category enables you to select titles quickly. To select a title by category, do the following:
< Without COVER > Alternatively, do the following:

To transfer category of a title from "New titles" to "Issued titles", do the following:
To transfer category of several titles at once from "New titles" to "Issued titles", do the following:
< Without COVER > Bookshelf key enables the same operation as the Eject key.
"Service Announcement" is the information distributed by each online service provider. You can listen to the "Service Announcement" by selecting "Service Announcement" media. The "Service Announcement" media is not separated for each online service provider such as the bookshelf.

To listen to the "Service Announcement", do the following:
If your PLEXTALK had registered several online service providers, the Service Announcements are sorted by each online service provider.
< Without COVER > You can switch online service providers in the following method.
After listening to a Service Announcement, the Service Announcement can be deleted. To delete Service Announcements at once, do the following:

< Without COVER > Bookshelf key enables the same operation as the Eject key.
14.4.1. Updating all bookshelves
You can update all the bookshelves that are registered in PLEXTALK manually. Do the following:
To update a specified online service provider bookshelf, do the following:

You can manually update all the Service Announcements that are registered in PLEXTALK. Do the following:
Some online service providers supply services such as searching titles. To use the service, you need to select the “online service” option at the top menu of PLEXTALK. Available services on the menu differ from each service provider and the operation of the menu differs accordingly. Therefore this section explains generally how to operate the menu. Contact the service provider to learn the details of the service.
To use the online service menu, do the following:

This menu provides interactive communication between the user and service provider. You need to respond to the request from the service provider. Types of requests are "multiple choice" and "text entry".
After answering a series of requests, press the Enter key to submit your response. At the end of the interactive communication, the online service provides a result. If the online service provides a "title list" as a result of the interactive communication, select the title you wish to borrow. To select a title, do the following:
To borrow several titles at once, do the following:

This chapter describes how to enter characters.
Multiple characters are mapped to each numeric key and one of the characters is selected by pressing the numeric key.
Order of character mapping Characters mapped to a numeric key appear in order as "lower cases", "number", and "upper cases". For example, pressing 5 key switches the characters in order of "j, k, l, 5, J, K, L".
Character is confirmed after two seconds automatically After selecting a character, the character is automatically confirmed after two seconds inactivity and PLEXTALK announces the character.
Entering multiple characters mapped to a key continuously To enter multiple characters mapped to a key without waiting two seconds, press the Fast Forward key before entering next character. For example, to enter “ab”, enter “a” by pressing the Number 2 key once, and press the Fast Forward key, then enter “b” by pressing the 2 key twice.
Example of operation Entering "http" h : Press the 4 key twice. t : Press the 8 key once. t : Press the 8 key once. p : Press the 7 key once.
Characters mapped to each numeric key The characters mapped to each numeric key are as follows: 1 contains ".", "@", "/", ":", "1" 2 contains a, b, c, 2, A, B, and C 3 contains d, e, f, 3, D, E, and F 4 contains g, h, i, 4, G, H, and I 5 contains j, k, l, 5, J, K, and L 6 contains m, n, o, 6, M, N, and O 7 contains p, q, r, s, 7, P, Q, R, and S

8 contains t, u, v, 8, T, U, and V 9 contains w, x, y, z, 9, W, X, Y, and Z 0 contains (Space), ?, _, =, and 0
Confirming entered characters Press the Play/Stop key to listen to the entered text.
Changing character type To change type of characters, press the bookmark key to switch between “ABC mode”, “Number mode” and “Symbol table”.
Number mode is the mode to enter numbers by pressing numerical keys. Press the bookmark key several times to switch to the Number mode, then enter numbers.
The 1 to 0 keys correspond to the numbers.
Symbol table is the mode to enter symbols. Use the Number 2, 4, 6 and 8 keys to scroll characters on the symbol table and press the Number 5 key to enter the character. Press the bookmark key several times to switch to the symbol table, then enter symbols.
To scroll the characters on the symbol table, press the number 2 key to scroll up, press the number 8 key to scroll down, press the number 4 key to scroll left and press the number 6 key to scroll right. To enter a symbol several times, press the Number 5 key repeatedly.
Symbol table is described below.

+ - = / \ _ [ ]
! @ # $ % ` { }
^ & * ( ) ~ < >
Move back a character Press the Rewind key to move back a character.
Move ahead a character Press the Fast Forward key to move ahead a character.
Move back to the beginning of the line Press and hold the Rewind key to move back to the beginning of the line.
Move ahead to the end of the line Press and hold the Fast Forward key to move ahead to the end of the line.
Backspace (Delete the previous character) Press the Bookshelf key to delete the previous character.
Deleting a character at current position Press the Go to key and the number 8 key together to delete the current character.
Deleting all characters Press and hold the Bookshelf key to delete all characters.
Switching "insert" mode and "overwrite" mode Press the Go to key and the number 5 key together to switch the "insert" mode and "overwrite" mode.



Podcast is on demand technology that allows you to download audio files from various web sites such as music providers, news networks, or talk radio. After adding the list of your favorite Podcasts to PLEXTALK, you can download the updated audio files in the series. Audio files delivered from Podcast are hereinafter referred to as “Episode”.
16.1.1. Registering podcast feeds using the "Plextalk Transfer" software
To register podcast feeds using the "Plextalk Transfer" software, do the following:




If you are already using podcast receiver software, you can register your favorite podcast feeds to PLEXTALK. Export the Podcast feeds into the opml file. Then, create "PlexPodcast" folder at the root of the SD card or USB device and store the opml file in this folder. You can store multiple opml files.

After registering podcast feeds on an SD card or USB device, you need to obtain the "list of the episodes" first and then download the "episodes". To download the episodes, it is necessary to connect the PLEXTALK to the Internet.
To download and listen to the episodes, do the following:
< Without COVER > Note: You can check the progress of downloading by pressing the information Key. Note: During downloading the "episodes list", you can cancel the download using the Cancel key.
16.3. Navigating by Episode, 10 minutes or 30 seconds < Without COVER >
You can select your favorite Episode. Also, you can move to your favorite position of the Episode using the every 10 minutes or every 30 seconds scale.
To navigate by "Episode", "10 minutes" or "30 seconds" option, do the following:

You can access the website of the Podcast feed and obtain the latest episode list using "Update the episode list" option from the podcast menu.
You can download all episodes which are not downloaded yet.


You can listen to web radio on various web sites with PLEXTALK. You need to add the URL of your favorite web radio station to the playlist and access the site for streaming.
To listen to web radio, you have to register web radio stations in advance. First, you need to use your computer and obtain a playlist file, containing the URL of the web radio station, whose extension is "pls", "m3u", or "asx". Then, create "PlexWebradio" folder at the root of SD card or USB device and store the file in this folder. You can add multiple web radio stations in this folder.
Example: You can find play list files at Internet sites which introduce web radio stations such as “SHOUTcast”. http://www.shoutcast.com Select the desired radio station and right click to save it into the "PlexWebradio" folder. Then the "pls" file will be stored in the folder.
To listen to web radio, it is necessary to connect the PLEXTALK to the Internet first.
To listen to web radio, do the following:

By connecting wirelessly with Bluetooth devices such as headphones, you can listen to the music and DAISY books from a remote location. The operation method is same as regular when you operate on PLEXTALK key pad. You can play/stop music and DAISY books using play/stop key on the Bluetooth device if the device has it.
When you first connect Bluetooth devices to the PLEXTALK, you need to do "pairing". Bluetooth pairing is a process in which two Bluetooth devices communicate with each other through an established connection. The pairing process is below:

You can connect or disconnect PLEXTALK and the Bluetooth devices. Do the following:
Note: Depending on the Bluetooth devices, you may not be able to connect or disconnect using the Bluetooth devices. Note: Connecting to a Bluetooth device is automatically executed when you turn ON the power of PLEXTALK, if the Bluetooth device is turned on, the audio will be output from the Bluetooth device. Note: The Bluetooth device will be disconnected automatically if you connect headphone to PLEXTALK.
The operation method is exactly same as regular operation when you operate on PLEXTALK key pad even if connecting the Bluetooth devices.
You can play/stop music and DAISY books using play/stop key on the Bluetooth device if the device has it. You can fast forward/rewind music and DAISY books using play/stop key on the Bluetooth device if the device has it.
·

When playing audio file When playing text file
Forward Jump forwards one phrase or track
Jump forwards one phrase or paragraph
Rewind Jump back one phrase or track
Jump back one phrase or paragraph
Fast forward Fast forward Jump forwards 5 phrases or sentences
Fast rewind Fast rewind Jump back 5 phrases or sentences
You can enable or disable the Bluetooth function. Do the following:
You can delete the Bluetooth paring information which is registered in your PLEXTALK. Do the following:
Bluetooth device PLEXTALK · Play/Stop Play/Stop Play/Stop

If you also use the wireless network and Bluetooth simultaneously, skipping may occur depending on the Bluetooth devices. It has possibility to improve skipping that you set wireless network to a lower speed. You can limit the connection speed of a wireless network using this menu. Do the following:

19.1. The built in help file < Without COVER >
To access the built in help file, do the following:
To exit the help file, do the following:
To find out the system version or the serial number of your PLEXTALK and PDTB key information, do the following:
Some DAISY books have items that you are able to skip. PLEXTALK enables you to select whether you skip the item or not. This feature is called "Skippable." Skippable items are as follows:

To set the "Skippable" settings, do the following:
If the latest firmware exists when the power is turned on, PLEXTALK will ask if you want to update the firmware or not. Press the Play/Stop key if you want to update, updating starts then. Press the Cancel key if you want to update later.
< Without COVER > To update later, do the following:
To delete all authorization keys that have been registered in Plextalk, do the following:

To reset all settings back to the factory defaults, do the following:
The following is a list of all the default settings for the PLEXTALK.

CD Loading system:
Compatible CDs:
12cm diameter CD, CD-R and CD-RW discs. PLEXTALK is only compatible with round 12cm CDs. 8cm CD and irregularly shaped CDs, such as the business card type, will cause a malfunction and should not be used.
SD card slot:
Playable contents:
Books conforming to DAISY 2.0, 2.02 and 3.0 standards Audio files in MP3, WMA, AMR-WB+, Ogg Vorbis, Wave (PCM) formats, Audible Format 4(.aa) Music CDs (CD-DA) Text file : plain text, html, Microsoft .doc, docx and EPUB2
Web radio:
Audio input and output:
Headphone terminal (Stereo) Built in speaker (Monaural)
Externally connected terminal:
USB 2.0 RJ45 (Wired LAN)
Clock precision:
Approximately 60 seconds per month
Slot insertion · SD/SDHC card

Electric Power Source:
AC adaptor, AC 100 V to 240 V, 50 or 60 Hz
Dimensions and weight:
Length 219 mm Width 170 mm Height 56 mm Weight Approx. 1300 grams
Power consumption (maximum):
Working temperature and humidity:
Fahrenheit from 40 to 104 Celsius from 5 to 40 Humidity from 20% to 80%, no moisture.
Headphones (line output):
Compatible impedance 32 ohm unbalanced Jack 3.5mm diameter stereo mini jack
Built In Speaker:
Output impedance 4 ohm Output 2.0W
Guide voice:
Gives spoken information about the current operation. Provides key descriptions in Key Describer mode. Speaks menu items. Gives help information (press the Information key).
Search function:
Heading, Group, Page, Phrase, Bookmark, Album, Track, Level, Screen, Paragraph, Line, Sentence, Spell, Word, Character

Volume adjustment:
0 to 25 (in increments of 1)
Guide volume adjustment:
-5 to +5 (in increments of 1)
Play speed adjustment:
12 settings from -3, through 0, to +8 (in increments of 1). Normal speed is at 0. Minus 3 is half of the normal speed. Plus 8 is double speed when using the synthetic voice. In other cases, plus 8 is triple speed.
Tone adjustment:
13 settings from -6, through 0, to +6 (in increments of 1) Normal tone is at 0
Memory function:
Bookmarks, maximum is 10000
Dimensions:
Length 53.64 mm Width 56.68 mm Height 29.00 mm
Operating time:
DAISY format, CD playing, 5 hours Music CD (CD-DA) format, CD playing, 2 hours DAISY format, SD card playing, 8 hours

Streaming / Download Service Announcements Dynamic menus
This software is provided by the copyright holders and contributors "as is" and any express or implied warranties, including, but not limited to, the implied warranties of merchantability and fitness for a particular purpose are disclaimed. In no event shall the foundation or contributors be liable for any direct, indirect, incidental, special, exemplary, or consequential damages (including, but not limited to, procurement of substitute goods or services; loss of use, data, or profits; or business interruption) however caused and on any theory of liability, whether in contract, strict liability, or tort (including negligence or otherwise) arising in any way out of the use of this software, even if advised of the possibility of such damage.

This appendix lists all menu items in the Main Menu along with their corresponding sub menu hierarchy.
Normal playback Repeat title (DAISY, Text, Audio book) Repeat track (Audio Files) Repeat album (Audio Files) Repeat entire albums (Audio Files) Shuffle repeat (Audio Files) Reading audio file name
Read audio file name Read audio track number Multimedia DAISY playback setting
Play Skip Select footnote
Play Skip Select note reference
Play Skip Select annotation
Play Skip Select line number
Play Skip Select sidebar
Play Skip Select producer note
Auto Audio Text

Media Management: Media and title information Delete all files on the SD card Delete all files in the USB device Delete all files in Internal Memory Delete selected title (Delete selected album)
System version Serial number Installed key (if obtained.) Select guide volume Select the synthetic voice
Voice 1 Voice 2 Select the waiting sound
Waiting sound 1 Waiting sound 2 No waiting sound Set the date and time Bluetooth setting
Search for Bluetooth device Enable or disable the Bluetooth Clear pairing information Bluetooth communication stability setting Network settings
Confirm network information Load network settings Save network settings Enable or disable wireless network device Wired network settings Wireless network settings
Available wireless network Add wireless network setting
Play Skip

Change or delete wireless network setting
Change the priority and automatic connection settings Change wireless network setting Delete wireless network setting Initialize all network settings to default Online service setting
Load the setting Confirm and change the setting
Change the setting Delete the setting Setting for label playback
Set priority to Audio Label Text Label only Network update Delete authorization keys Initialize all settings to default
Online service

General operating problems
Symptom: You turn on the Power button, but the power does not come on. Possible cause: Loose power cord or AC adaptor. Solution: Firmly reinsert the mains power cable into PLEXTALK and ensure that the AC adaptor is firmly inserted.
Symptom: The power is on, but PLEXTALK does not operate. Possible cause: Key Lock is On. Solution: Turn off the key lock by pressing the Rewind key and Fast Forward key at the same time.
Symptom: PLEXTALK will not shut down and no keys can be operated. Possible cause 1: Key Lock is On. Solution: Turn off the key lock by pressing the Rewind key and Fast Forward key at the same time. Possible cause 2: Unknown error. Solution: Press and hold down the Sleep timer key and Power button together for more than 10 seconds. PLEXTALK will shut down. If this does not work, remove the AC Adaptor and Battery from the unit and then reinsert them.
Symptom: There is no voice guidance. Possible cause 1: The volume has been set to '0'. Solution: Increase the volume so that the guide speech can be heard. Possible cause 2: The power is off. Solution: Turn the power on. Possible cause 3: The PLEXTALK is connecting to Bluetooth device. Solution: Check if a Bluetooth headphone is connected.
Guide voice: "Unsupported SD card" or "Unsupported USB device." Possible cause: The SD card or USB media has been formatted with an unsupported file system. Solution: Insert an SD card or USB media which is formatted as FAT-16 or FAT-32.
Guide voice: Read error.

Possible cause: Title cannot be played back. Solution: Press the Previous Title key or Next Title key to try to select a different title, or switch the media including a different title.
Guide voice: "There is no target media". Possible cause: You have not inserted a suitable backup media. Solution: Insert either an SD card or a USB media with sufficient storage space to perform the backup and then try again.
Guide voice: "The SD card is locked". Possible cause: You have locked the SD card using the lock switch on the side of the card. Solution: Eject the card, move the locking switch to the unlocked position, reinsert it into PLEXTALK and try again.

Trouble / Question Solution / Answer
I want to know the IP address of PLEXTALK
You can confirm the IP address from "Confirm network information" option of the network setting menu.
PLEXTALK does not select your desired access point.
You can confirm list of available access point by wireless network setting option in the network setting. When PLEXTALK cannot find access point, please confirm status of network power has been set ON. If the access point is listed, please confirm the priority of the access point. You can set the highest priority from "Change the priority and automatic connection settings" option of the network setting menu.
It failed to find access point. I am using access point that support IEEE802.11a
PLEXTALK only support IEEE802.11b/g. If your access point cannot use IEEE802.11a and IEEE802.11b/g in same time, please select IEEE802.11b/g.
It failed to connect access point. I am using non broadcasted SSID.
Non broadcasted SSID require a long time to establish a connection between PLEXTALK. Please allow the PLEXTALK up to 5 minutes to see if it finally succeeds or not. If possible, please try to configure your access point setting to enable broadcasting the SSID name. When it succeeds in connecting after broadcast setting, that means your network configuration is fine, but non- broadcast setting is problem. If it failed even with broadcasted SSID, please confirm wireless security setting.
It failed to connect access point. I am using DHCP.
Even if PLEXTALK could establish the wireless connection between access point, but when it failed to retrieve IP address, connection failed message will show up. In this case, please try fixed IP address. If it succeeds in connecting, DHCP server is problem. Please confirm your DHCP server setting. If it still fails to connect, please confirm wireless security setting.
It failed to connect access point. I am using MAC address filtering.
When MAC address filtering is enabled in access point security setting, it refuses a connection of un-configured network device. You need to configure your access point to add PLEXTALK MAC address. You can confirm MAC

address of PLEXTALK by "Confirm network information" option of the network setting menu.
PLEXTALK always tries connection to not available SSID. I have configured Stealth SSID settings also.
When you have configured a network setting with Stealth SSID enabled, PLEXTALK tries connection to stealth (= non broadcasted SSID) always. Please set Stealth SSID access point to low priority in the list of wireless settings.
Plextalk cannot connect to the network service. I am using WEP security with Fixed IP address.
When you are using WEP security with fixed IP address setting, PLEXTALK will succeed in connecting to the access point even it has a wrong password. Please confirm WEP password again.
Does PLEXTALK support WPS (WIFI Protected Setup?)
WPS is not supported. You need to configure the network setting by yourself.
It failed to connect to the access point.
Please try and restart the access point and PLEXTALK.


#7 p, q, r, s, 7, P, Q, R, S,
#9 w, x, y, z, 9, W, X, Y, Z,
Bookshelf key Push - Backspace (Delete the previous character) Hold - Delete all characters
Play/stop key Play start from cursor position / pause
Rewind key Press - Move back a character Hold - Move back to the beginning of the line
Fast Forward key Press - Move ahead a character Hold - Move ahead to the end of the line
GoTo key and 8 key Delete the current character
Bookmark key Select input mode from ABC mode, Number mode or Symbol table

#2 Press - Up Hold - Go to the uppermost part of the table
ABC mode · Symbol table


Hold - Go to the leftmost part of the table
#6 Press - Right Hold - Go to the rightmost part of the table
#8 Press - Down Hold - Go to the lowermost part of the table
() Table has 8 Columns and 4 rows. . , ‘ “ : ; ? | + - = / \ _ [ ] ! @ # $ % ` { } ^ & * ( ) ~ < >
* Other keys are same as ABC mode.
Pages referenced in this manual — manufacturer, support and downloads.
Common problems, likely causes, and what to do.
| Problem | Possible cause | Remedy | |
|---|---|---|---|
| I want to know the IP address of PLEXTALK | You can confirm the IP address from "Confirm network information" option of the network setting menu. | p.91 | |
| PLEXTALK does not select your desired access point. | You can confirm list of available access point by wireless network setting option in the network setting. When PLEXTALK cannot find access point, please confirm status of network power has been set ON. If the access point is listed, please confirm the priority of the access point. You can set the highest priority from "Change the priority and automatic connection settings" option of the network setting menu. | p.91 | |
| It failed to find access point. I am using access point that support IEEE802.11a | PLEXTALK only support IEEE802.11b/g. If your access point cannot use IEEE802.11a and IEEE802.11b/g in same time, please select IEEE802.11b/g. | p.91 | |
| It failed to connect access point. I am using non broadcasted SSID. | Non broadcasted SSID require a long time to establish a connection between PLEXTALK. Please allow the PLEXTALK up to 5 minutes to see if it finally succeeds or not. If possible, please try to configure your access point setting to enable broadcasting the SSID name. When it succeeds in connecting after broadcast setting, that means your network configuration is fine, but non- broadcast setting is problem. If it failed even with broadcasted SSID, please confirm wireless security setting. | p.91 | |
| It failed to connect access point. I am using DHCP. | Even if PLEXTALK could establish the wireless connection between access point, but when it failed to retrieve IP address, connection failed message will show up. In this case, please try fixed IP address. If it succeeds in connecting, DHCP server is problem. Please confirm your DHCP server setting. If it still fails to connect, please confirm wireless security setting. | p.91 | |
| It failed to connect access point. I am using MAC address filtering. | When MAC address filtering is enabled in access point security setting, it refuses a connection of un-configured network device. You need to configure your access point to add PLEXTALK MAC address. You can confirm MAC | p.91 |
Owners and our team usually reply within a day — and your question helps the next person too.
Be the first to ask — other owners or our team will answer.