Instruction/ maintenance manual of the product TEW-659BRV TRENDnet
Go to page of 14
300Mbps Wireless N VPN Router TEW -659BRV 1 .0 1 Ÿ Quick Inst allation Guide (1) Ÿ T roubleshoo ting (7).
Minimum Requirements 1 Package Contents Ÿ TEW-659BRV Ÿ CD-ROM (User's Guide) Ÿ Multi-Language Quick Installation Guide Ÿ Network Cable (1.5m / 5ft) Ÿ Power Adapter (12V DC, 1A) If any of the above contents are missing, please contact your reseller .
2 4. Connect one end of a network cable to one of the TEW-659BRV's network ports. Connect the other end of the cable to the computer's network port. 2. Power off your Cable or DSL modem. 3. Disconnect the network cable from your Cable or DSL modem and your computer .
3 3. Configure the Wireless Router Note: 1. It is recommended that you configure the Wireless Router from a wired computer . 2. For VPN configuration instructions please refer to the User's Guide. The User's Guide is located on the provided CD-ROM.
4 6. Select your Time Zone and then click Next . 7. Select Auto Detecting W AN T ype and then click Next . 8. Configure the settings based on information provided by your ISP . Follow the wizard instructions to complete the configuration. Note: Each Internet Connection type may have different options.
5 10 . Select the desired Authentication mode, select the desired Encryption type, enter characters for your Preshare key and then click Next . For WP A-PSK or WP A2-PSK, the Preshare key must be between 8 and 63 ASCII or 64 HEX characters. Make sure to copy down the Preshare key .
6 14. Open up your browser and enter in a URL (e.g. http://www .trendnet.com) to verify that you have Internet connection. Y our configuration is now complete For detailed information regarding the TE.
T roubleshooting 7 1. I typed http://192.168.10.1 in my Internet Browser's Address Bar , but an error message says “The page cannot be displayed.” How can I get into the TEW-659BRV's web configuration page? 1. Check your hardware settings again by following the instructions in Section 2.
2 . Click Internet Protocol (TCP/IP) and then click Properties. Then click on Obtain an IP address automatically . Windows XP/2000 1 . Go into the Control Panel , double- click the Network Connections icon and then right-click the Local Area Connection icon and then click Properties .
Ÿ Wireless LAN is on or enabled/Wireless data transmission Ÿ WPS is activated (Blinking rapidly for 2 minutes) Wireless/WPS LED Green Green Green Green N/A N/A N/A N/A Green Blinking Solid Off Blink.
.
.
.
TRENDnet 206 7 5 Manhattan Place T orrance, CA 9050 1 . USA Copyright ©201 1 . All Rights Reserved. TRENDne t..
An important point after buying a device TRENDnet TEW-659BRV (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought TRENDnet TEW-659BRV yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data TRENDnet TEW-659BRV - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, TRENDnet TEW-659BRV you will learn all the available features of the product, as well as information on its operation. The information that you get TRENDnet TEW-659BRV will certainly help you make a decision on the purchase.
If you already are a holder of TRENDnet TEW-659BRV, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime TRENDnet TEW-659BRV.
However, one of the most important roles played by the user manual is to help in solving problems with TRENDnet TEW-659BRV. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device TRENDnet TEW-659BRV along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
