Instruction/ maintenance manual of the product R1801M Ryobi
Go to page of 20
OPERA T OR'S MANUAL R1801M ROUTER With R181FB Fixed Base Double Insulated Your new router has been engineered and manufactured to our Ryobi’s high standard for dependability, ease of operation, and operator safety. When properly cared for, the router will give you years of rugged, trouble-free performance.
2 I Introduction .................................................................................................................................................................... 2 I General Saf ety Rules ...........................................
3 GENERAL SAFETY RULES W ARNING: Read and underst and all instructions. F ailure to f ollow all instructions listed below , m a y result in elec- tric shock, fire and/or serious personal injur y . SAVE THESE INSTRUCTIONS WORK AREA I Keep your work area clean and well lit.
4 SPECIFIC SAFETY RULES ADDITIONAL RULES FOR SAFE OPERATION I Know your power tool. Read operator ’ s manual carefully . Learn it s applications and limitations, as well as the specific potential hazards related to this tool. Following this rule will reduce the risk of electr ic shock, fire , or serious injur y .
5 The purpose of safety symbols is to attract your attention to possible dangers. The safety symbols, and the explanations with them, deserve your careful attention and understanding. The safety warnings do not by themselves eliminate any danger. The instructions or warnings they give are not substitutes for proper accident prevention measures.
6 ELECTRICAL DOUBLE INSULATION Double insulation is a concept in safety in electric power tools, which eliminates the need for the usual three-wire grounded power cord. All exposed metal parts are isolated from the internal metal motor components with protecting insulation.
7 FEA TURES Depth of Cut ................................................................................................................... ................. 0 - 1-1/2 in. (0 - 38 mm) Collet ...........................................................
8 FEA TURES INSTRUCTIONS When unpacking the tool: I Carefully remov e the tool and accessories from the box . I Make sure that all items listed in the pac king list are in- cluded. I Inspect the tool carefully to make sure no breakage or damage occurred during shipping.
9 OPERA TION W ARNING: Ex ercise caution when using this tool. Careless ac- tions, f or e v en a fraction of a second, can result in serious personal injur y . You may use the router for the purposes listed below: I Routing Grooves , shaping edges, etc.
10 OPERA TION W ARNING: Ne ver connect the router to po wer supply when y ou are assemb ling par ts, making adjustments, install- ing or removing cutters, or when not in use . Discon- necting the router pre vents accidental star ting that could cause serious injur y .
11.
12 OPERA TION ADJUSTING DEPTH OF CUT Proper depth of cut depends on several factors: the peak horsepower of the router motor, the type of cutter, and the type of wood. A lightweight, low horsepower router is designed for making shallow cuts. A router with a high horsepower rating can safely cut deeper.
13 FEEDING THE ROUTER The “secret” of professional routing and edge shaping lies in making a careful set-up for the cut and in selecting the proper rate of feed. DIRECTION (EXTERNAL) See Figure 8. When routing, the cutter rotates clockwise. Therefore, you should feed the router into the workpiece from left to right.
14 OPERA TION RATE OF FEED The proper rate of feed depends on several factors: the hardness and moisture content of the wood, the depth of cut, and the cutting diameter of the bit. When cutting shallow grooves in soft woods such as pine, a faster rate of feed can be used.
15 OPERA TION DETERMINING DEPTH OF CUT See Figure 12 . As previously mentioned, the depth of cut is important because it affects the rate of feed that, in turn, affects the quality of the cut (and, also, the possibility of damage to your router motor and bit).
16 OPERA TION Fig. 14 When routing a groove wider than the diameter of the cutter, clamp a straightedge on both sides of the cutlines. Position both guides parallel to the desired line of cut and spaced equal distances from the desired edges of the groove.
17 OPERA TION EDGING WITH PILOTS See Figure 15. You can cut rabbets and molded edges using piloted cutters. The pilot, which extends below the cutter, allows the cutter to turn while the pilot follows the edge of the workpiece. Some pilots are solid extensions of the cutter.
18 ACCESSORIES The following recommended accessories are currently available. ACCESSORIES Template ........................................................... 4070177 Edge Guide ....................................................... 6090080 MAINTENANCE GENERAL Avoid using solvents when cleaning plastic parts.
19 NOTES.
R YOBI TECHNOLOGIES INC. 1428 P earman Dair y Road Anderson, SC 29625 P ost Office Bo x 1207 Anderson, SC 29622 www .r y obitools.com Phone 1-800-525-2579 983000-165 8-03 • SER VICE Now that you have purchased your tool, should a need ever exist for repair parts or service, simply contact your nearest Ryobi Authorized Service Center.
An important point after buying a device Ryobi R1801M (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Ryobi R1801M yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Ryobi R1801M - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Ryobi R1801M you will learn all the available features of the product, as well as information on its operation. The information that you get Ryobi R1801M will certainly help you make a decision on the purchase.
If you already are a holder of Ryobi R1801M, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Ryobi R1801M.
However, one of the most important roles played by the user manual is to help in solving problems with Ryobi R1801M. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Ryobi R1801M along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
