Instruction/ maintenance manual of the product 4950301 Ryobi
Go to page of 16
OPERA T OR'S MANUAL ROUTER MOUNTING KIT 4950301 (FOR USE WITH BT3000 AND BT3100 T ABLE SA WS) Y our new router mounting kit has been engineered and manufactured to Ryobi's high standard for dependability , ease of operation, and operator safety .
Page 2 ■ Rules for Safe Operation ....................................................................................................... ..................................... 3-4 ■ Unpacking .......................................................
Page 3 Safe operation of this accessory requires that you read and understand this operator's manual, the operator’s manual for the table saw and all labels affixed to the tool. READ ALL INSTRUCTIONS ■ KNOW YOUR ACCESSORY. Read the operator's manual carefully.
Page 4 SA VE THESE INSTRUCTIONS RULES FOR SAFE OPERA TION The purpose of safety symbols is to attract your attention to possible dangers. The safety symbols, and the explanations with them, deserve your careful attention and understanding. The safety warnings do not by themselves eliminate any danger.
Page 5 INTRODUCTION This kit gives you the capability of mounting a router on the accessory table of your saw. A router mounted on the accessory table will provide expanded capabilities for making rabbets, grooves, chamfers, dovetails, and mortise and tenon joints.
Page 6 LOOSE P ARTS DESCRIPTION QUANTITY DESCRIPTION QUANTITY LIST OF LOOSE P ARTS Your #4950301 Router Mounting Kit includes the following parts: Fig. 1 GUIDE FENCE BRACKET WITH GUIDE BLOCK 1/2 in. KNOB BOLTS 5/16 in. WASHERS THROAT PLATES ROUTER MOUNTING PLATE TABLE CLAMPING BRACKET 5/16 in.
Page 7 ASSEMBL Y W ARNING: The saw's motor cord must be disconnected from the receptacle on the saw when using this kit. The power cord of the router must be plugged into the receptacle on the saw. The saw's master switch must be used to turn the router ON and OFF .
Page 8 ASSEMBL Y Fig. 4 GUARD/DUST COVER WITH PIVOT ASSEMBLY KNOB NUT FLATS ON POST POST KNOB BOLTS 5/16 in. WASHERS GUIDE FENCE BRACKET RIP FENCE T-NUTS CARRIAGE BOLT (NOT SHOWN) SPACER Fig.
Page 9 Fig. 6 Fig. 7 Fig. 8 ASSEMBL Y TO ASSEMBLE ROUTERS WITH 2-HOLE PATTERN TO ROUTER MOUNTING PLATE (cont'd): See Figures 5 and 6. ■ Secure the router mounting plate to the router using two 5/16-18 x 3/4 in. bolts provided in the router mounting kit.
Page 10 Fig. 9 Fig. 10 4–HOLE ROUTER WITH MOUNTING PLATE ATTACHED ROUTER MOUNTING SCREWS FRONT OF ROUTER ROUTER MOUNTING PLATE ROUTER WITH 4–HOLE PATTERN TO ASSEMBLE ROUTERS WITH 4-HOLE PATTERN TO ROUTER MOUNTING PLATE: See Figures 9 and 10. For Ryobi routers, model numbers RE600 and RE601.
Page 11 ROUTER MOUNTING TO MOUNT ROUTER WITH PLATE TO ACCESSORY TABLE: ■ Place the router with the mounting plate under the accessory table. See Figure 11. ■ Secure the mounting plate to accessory table using the four #1/4-20 x 1/2 in. flat head screws provided.
Page 12 ROUTER MOUNTING around the raised portion on the underside of the accessory table, clamping it tightly against the rear rail. ■ Secure with a 5/16 in. washer and 5/16-18 x 3/4 in. knob bolt. ■ Tighten knob bolt securely. FINAL ASSEMBLY: After the router mounting parts have been assembled, your setup should be similar to Figure 13.
Page 13 NOTES.
Page 14 4950301 ROUTER MOUNTING KIT 1 3 4 5 5 4 3 6 7 8 9 10 11 12 13 17 16 20 14 4 19 23 21 22 24 3 2 18 15.
Page 15 4950301 ROUTER MOUNTING KIT Now that you have purchased your Router Mounting Kit , should a need ever exist for repair parts or service, simply contact your nearest Ryobi Authorized Service Center . Be sure to provide all pertinent facts when you call or visit.
R YOBI TECHNOLOGIES INC. 1428 Pearman Dairy Road Anderson SC 29625 Post Office Box 1207 Anderson SC 29622-1207 Phone 1-800-525-2579 www.ryobitools.com 983000-155 OPERA T OR'S MANUAL #4950301 ROUT.
An important point after buying a device Ryobi 4950301 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Ryobi 4950301 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Ryobi 4950301 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Ryobi 4950301 you will learn all the available features of the product, as well as information on its operation. The information that you get Ryobi 4950301 will certainly help you make a decision on the purchase.
If you already are a holder of Ryobi 4950301, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Ryobi 4950301.
However, one of the most important roles played by the user manual is to help in solving problems with Ryobi 4950301. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Ryobi 4950301 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
