Instruction/ maintenance manual of the product TEW-435BRM TRENDnet
Go to page of 11
TEW-435BRM Quick Inst allation Guide.
T able of Contents T able of Contents V ersion 06.19.2006 English ...................................................................................................... T roubleshooting .................................................................
Installation Requirements Application A working DSL Internet Connection A computer with a wired or wireless network adapter properly installed. Package Content 1.
English 2 Collect Internet Service Provider (ISP) Information During the installation of your Wireless ADSL Modem Router , the Setup Wizard will automatically detect your ISP connection type. If the router cannot detect your ISP connection type, you can manually specify the connection type.
English 3 2. Hardware Installation 2. Connect one end of the yellow RJ- 45 cable to one of the TEW-435BRM's LAN ports. Connect the other end of cable to the computer's Ethernet port. Then connect the 2dBi detachable antenna. 4. Connect the AC Power Adapter to the TEW -435BRM and then to a power outlet.
English 4 3. Configure the Modem Note: It is recommended that you configure the Modem from a wired computer . 2. Enter User name and Password, and then click OK . By default, User name: admin Password: password 1. Open your web browser , type http://192.
English 5 5. Select Auto-detect, and then click Next. Note: In the example, the DSL connection is PPPoE. 4. Click Next . 6. W ait for the Auto Detection process to complete.
Note: If the Setup Wizard could not automatically detect your Internet connection, select Manual Selection and input the information using the information provided by your ISP . Note: For other connection methods, follow the on screen instructions after the Auto Detection.
7 T roubleshooting Q1: A1: I typed http://192.168.0.1 in my Internet Browser's Address Bar , but an error message says “The page cannot be displayed.” How can I get into the TEW-435BRM's web configuration page? First, check your hardware settings again by following the instructions in Section 2.
8 Certifications This equipment has been tested and found to comply with FCC and CE Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference. (2) This device must accept any interference received.
Copyright ©2006. All Rights Reserved. TRENDnet. 3 1 35 Kashiwa Street T orr ance, C A 90505 USA P r o d uc t War r a n t y Re gi s t r a ti o n Please take a moment t o regist er your product online. Go to TRENDne t’s website at http://www .trendne t.
An important point after buying a device TRENDnet TEW-435BRM (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought TRENDnet TEW-435BRM yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data TRENDnet TEW-435BRM - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, TRENDnet TEW-435BRM you will learn all the available features of the product, as well as information on its operation. The information that you get TRENDnet TEW-435BRM will certainly help you make a decision on the purchase.
If you already are a holder of TRENDnet TEW-435BRM, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime TRENDnet TEW-435BRM.
However, one of the most important roles played by the user manual is to help in solving problems with TRENDnet TEW-435BRM. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device TRENDnet TEW-435BRM along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
