Instruction/ maintenance manual of the product Net Spot Wireless Access Point TRENDnet
Go to page of 14
Copyright ©2005. All Rights Reserved. TRENDware International, Inc. T R E N D n e t TRENDware, USA What's Next in Networking TEW -453APB V ersion 03.
T able of Contents English ...................................................................................................... T roubleshooting........................................................................................... 1 1 2 3 9 1 1 1.
Thank you for purchasing TRENDnet's TEW-453APB Hot Spot Wireless Access Point. This guide will help you set-up your Access Point quickly and easily .
2 1. Locate an optimum location for the Access Point. The best place for the Access Point is usually at the center of your wireless network. 2. Connect the RJ45 network cable to the Access Point, then connect the other end of the network cable to a Switch or Hub.
3 3. Configure TCP/IP Settings Before the Access Point can be accessed and configured, the computer's TCP/IP settings need to be changed. Windows 98SE/ME 1. Find the Start button located on the Desktop. 2. Click Start, click Settings, and then click on Control Panel .
4 5. Under the IP Address tab, click on Specify an IP address and enter 192.168.0.50 for IP address and 255.255.255.0 for Subnet Mask and click OK . 6.
5 English 7. At this point, the installation may require files from your Windows CD-ROM. If you are prompted for the location of these files, insert Windows 98 CD- ROM into your CD-ROM drive and select CD-ROM drive. 8. After the files load, the System Settings Change message appears, click Y es to reboot your system.
6 English Windows 2000/XP 1. Find the Start button located on the Desktop. 2. Click Start , and click on Control Panel . For Windows 2000, click Start , highlight Settings , and click Control Panel . 3. Double-Click the Network Connection Icon. 4. Right-Click on the Local Area Connection icon and then click on Properties .
7 English 5. Under the General tab, locate and click I nternet Protocol TCP/IP and then click Properties . The Internet Protocol (TCP/IP) Properties box will appear . 6. Click on Use the following IP address . Enter 192.168.0.50 for IP address and 255.
8 English 7. Click OK . 8. Y our computer is ready to access and configure the Access Point..
9 4. Configure the Access P oint From a Wired Computer 1. Open a web browser (Internet Explorer or Netscape) and enter http://192.168.0.228 in the address bar , then press the Enter key . The TEW- 453APB's authentication window will appear . T ype admin for User name, and type password for Password.
10 3. Select your country from the pull down menu, click Fixed IP Address , and type in your IP address, Subnet Mask, Gateway , and DNS to match your current network settings. Click Save . 4. Click OK. English 5. Click Apply/Restart. 6. The TEW -453APB is now ready for your Wireless Network.
11 T roubleshooting Q1: A1: Q2: A2: Q3. A3: Q4. A4: I specified the IP address http://192.168.0.228 in my Internet browser's address bar , but an error message says "The page cannot be displayed".
Copyright ©2005. All Rights Reserved. TRENDware International, Inc. @ T R E N D n e t TRENDware, USA What's Ne xt in Networking P r o d u c t Wa r r a n t y R e g i s t r a t i o n Please take a moment t o regis ter your pr oduct online. Go to TRENDwar e ’s website at http://www .
An important point after buying a device TRENDnet Net Spot Wireless Access Point (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought TRENDnet Net Spot Wireless Access Point yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data TRENDnet Net Spot Wireless Access Point - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, TRENDnet Net Spot Wireless Access Point you will learn all the available features of the product, as well as information on its operation. The information that you get TRENDnet Net Spot Wireless Access Point will certainly help you make a decision on the purchase.
If you already are a holder of TRENDnet Net Spot Wireless Access Point, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime TRENDnet Net Spot Wireless Access Point.
However, one of the most important roles played by the user manual is to help in solving problems with TRENDnet Net Spot Wireless Access Point. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device TRENDnet Net Spot Wireless Access Point along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center