Instruction/ maintenance manual of the product TL-WN881ND TP-Link
Go to page of 40
TL-WN881ND 300Mbps Wireless N PCI Express Adapter Rev: 1.0.0 1910010532.
COPYRIGHT & TRADEMARKS e. Specifications are subjec t to change without notic is a registered trademark of TP-LINK TECHNOLOGIES CO., LTD. Other br ands and product names are trademarks or any form.
FCC STATEMENT This equipment has been tested and found to comply wi th the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. Thes e limits are designed to provide reasonable protection against harmful interference in a re sidential installation.
CE Mark Warning This is a class B product. In a domestic environm ent, this product may cause r adio interference, in which case the user may be required to take adequate measures.
TP-LINK TECHNOLOGIES CO., LTD TP-LINK TECHNOLOGIES CO., LTD South Building, No.5 Keyuan Road, Central Zone, Science & Technol ogy Park, Nanshan, Shenzhen, P. R. China DECLARA TION OF CONFORMITY For the following equipment: Product Description: 300Mbps Wireless N PCI Express Adapter Model No.
CONTENTS Package Contents .................................................................................................... 1 Chapter 1 Introduction ........................................................................................ 2 1.1 Product Overview .
Package Contents Please verify that all the pack age contents below are available. ¾ One TL-WN881ND 300Mbps Wireless N PCI Express Adapter ¾ Quick Installation Guide ¾ One Resource CD for TL-WN881N.
TL-WN881ND 300Mbps Wireless N PCI Express Adapter User Guide 2 Chapter 1 Introduction 1.1 Product Overview The adapter is an 802.11n client device designed to deliver a high-speed and unrivaled wireless performance for your desktop.
TL-WN881ND 300Mbps Wireless N PCI Express Adapter User Guide 3 1.3 Hardware Overview LED status: Status Working Status Off The driver has not been installed; The adapter's radio has been disabled. Flashing Slowly The driver has been installed but no data is being transmitted or received.
TL-WN881ND 300Mbps Wireless N PCI Express Adapter User Guide 4 Chapter 2 Installation Please install the PCI Express adapt er into your computer before installing the driver software from the Resource CD. 2.1 Hardware Inst allation 1. Turn off your computer and unplug the power cord from the computer.
TL-WN881ND 300Mbps Wireless N PCI Express Adapter User Guide 5 2. The InstallShield Wizard window will appear. Click Next to continue. Figure 2-2 3. Choose a setup type. It is recommended to select Install TP-LINK Wireless Configuration Utility and Driver .
TL-WN881ND 300Mbps Wireless N PCI Express Adapter User Guide 6 4. Click Change to specify the destination location for the software or you can leave it default. Click Next in the screen below to continue. Figure 2-4 5. Click Install to continue the setup.
TL-WN881ND 300Mbps Wireless N PCI Express Adapter User Guide 7 6. The utility and drivers will install. This may take 1~2 minutes. Figure 2-6 7. After all the steps above, y ou will see the screen below.
TL-WN881ND 300Mbps Wireless N PCI Express Adapter User Guide 8 8. After installation, the utili ty configuration page will automat ically pop up as shown in the following figure and the icon will appear in your system tray. To connect to a network, please refer to Chapter 3 Connect to a Wireless Network .
TL-WN881ND 300Mbps Wireless N PCI Express Adapter User Guide 9 Chapter 3 Connect to a Wireless Network With both the hardware and software successfully in stalled into your computer, you can quickly connect to a wireless network usi ng one of the following methods.
TL-WN881ND 300Mbps Wireless N PCI Express Adapter User Guide 10 SSID (Service Set Identifier) is the name of the wireless network. The adapter will automatically connect to your tar get network next time if you tick Connect automatically . Figure 3-2 3.
TL-WN881ND 300Mbps Wireless N PCI Express Adapter User Guide 11 Input the password which can be f ound on the configuration page of your router or access point, then click OK to continue. Or push the QSS/WPS bu tton on your router if your rou ter features the QSS/WPS function to quickly build a connection without ha vi ng to enter a key.
TL-WN881ND 300Mbps Wireless N PCI Express Adapter User Guide 12 Figure 3-6 3.2 T o connect using QSS QSS (Quick Secure Setup) function allows y ou to add a new wireless device to an exi sting network quickly.
TL-WN881ND 300Mbps Wireless N PCI Express Adapter User Guide 13 Figure 3-7 3. The adapter will be connecti ng to the target network. Figure 3-8.
TL-WN881ND 300Mbps Wireless N PCI Express Adapter User Guide 14 4. When the following window appears, you hav e successfully connected to the network. Figure 3-9 3.2.2 PIN method There are two ways to confi gure the QSS by PIN method: 1) Enter the PIN from your AP device.
TL-WN881ND 300Mbps Wireless N PCI Express Adapter User Guide 15 2. The adapter will be connecti ng to the target network. Figure 3-1 1 3. When Figure 3-9 appears , you have successfully connected to the network. 3.2.2.2. Enter a PIN into your AP device This method is only available in Windows XP and Windows Vista.
TL-WN881ND 300Mbps Wireless N PCI Express Adapter User Guide 16 Figure 3-13 3. When Connect successfull y appears on the screen, the QSS configuration is complete. Or you can view the adapt er’s utility page to see whet her the connecti on has been successful as shown in Figure 3-15 .
TL-WN881ND 300Mbps Wireless N PCI Express Adapter User Guide 17 3.3 T o connect using Windows built-in wireless utility 3.3.1 In Windows 7 Windows 7 users may use the built-in wi reless utility. Follow the steps below. 1. Left-click the wireless icon in your system tray (lower -right corner).
TL-WN881ND 300Mbps Wireless N PCI Express Adapter User Guide 18 Figure 3-17 3. You have now successfully connected to the network. Figure 3-18 3.3.2 In Windows Vista Windows Vista users may use the built-in wireless utility. Follow the steps below. 1.
TL-WN881ND 300Mbps Wireless N PCI Express Adapter User Guide 19 Figure 3-19 2. The utility will display any available wireless networks in your area. Highlight the wireless network you would like to connect and then click Connect .
TL-WN881ND 300Mbps Wireless N PCI Express Adapter User Guide 20 Figure 3-21 4. You have now successfully connected to the network. Figure 3-22 3.3.3 In Windows XP Windows XP users may use the built-in wire less utility. Follow the steps below. 1. Right-click on the utility icon in your system tray (lower-right corner).
TL-WN881ND 300Mbps Wireless N PCI Express Adapter User Guide 21 Figure 3-23 Or double-click the utility icon to load the utility co nfiguration page. Click Advanced in the tools section and then select Use Windo w s wireless configuration tool in the figure shown below.
TL-WN881ND 300Mbps Wireless N PCI Express Adapter User Guide 22 Figure 3-26 3. The utility will display any available wireless networks in your area. Click on a network (displayed using the SSID) and click the Connect button. Figure 3-27 4. If the network is security-enabled, you will be prompted to enter the key as shown below.
TL-WN881ND 300Mbps Wireless N PCI Express Adapter User Guide 23 Chapter 4 Management This section will show you how to configur e your TL-WN881ND adapter using the TP-LINK Wireless Configuration Utility (TWCU). The TL-WN881ND adapter uses t he TP-LINK Wireless Configurat ion Utility as the management software.
TL-WN881ND 300Mbps Wireless N PCI Express Adapter User Guide 24 Figure 4-2 The following items can be found on the screen. ¾ Profile Name: Enter a name for your profile (e.g . Home, Office, CoffeeShop). The same name is not allowed. Please also note t hat no space is allowed between words.
TL-WN881ND 300Mbps Wireless N PCI Express Adapter User Guide 25 Figure 4-3 4.1.2 Modify a profile You may edit an existing profile by clicking the Modify button from the Profile page. For instance, you may like to change the profile name from Home to Home1 or you ma y want to specify another SSID for profile Ho me.
TL-WN881ND 300Mbps Wireless N PCI Express Adapter User Guide 26 Figure 4-5 4.2 Advanced The following configurat ions can be made on the Advanced page: 1) To select wire less configuration tool. Here you can decide whic h tool to use, either the TP-L INK Configuration Utility or t he Windows wireless configuration tool.
TL-WN881ND 300Mbps Wireless N PCI Express Adapter User Guide 27 4.3 About The About screen gives you information about th e Driver and Utility ve rsions of the adapter.
TL-WN881ND 300Mbps Wireless N PCI Express Adapter User Guide 28 Chapter 5 AP Mode In Soft AP mode, the adapter will work as an AP. This function is available only in Windows7.
TL-WN881ND 300Mbps Wireless N PCI Express Adapter User Guide 29 The Soft AP icon should then appear beside Adva nced icon in the utility. Figure 5-3 ¾ SoftAP mode: Select to enable or disable the function. ¾ Internet Connecting Share(ICS): Specify a connection throug h which devi ces connected to your AP can access the Internet.
TL-WN881ND 300Mbps Wireless N PCI Express Adapter User Guide 30 Chapter 6 Uninstall Software 6.1 Uninst all the utility sof t ware from your PC 1. On the Windows taskbar, click the Start button, click All programs Æ TP-LINK , and then click Uninstall-TP-LINK Wireless Configuration Utility .
TL-WN881ND 300Mbps Wireless N PCI Express Adapter User Guide 31 Figure 6-3 6.2 Uninst all the driver sof tware from your PC 1. On the Windows taskbar, click the Start button, click All programs Æ TP-LINK , and then click Uninstall-TL-WN881ND Driver .
TL-WN881ND 300Mbps Wireless N PCI Express Adapter User Guide 32 Appendix A: Specifications Normal Interface 32 bit PCI-E Interface Standards IEEE 802.11n, IEEE 802.11g, IEEE 802.11b Operating System Windows XP, Windows Vista, Windows 7 Throughput 300Mbps (Maximal) Radio Data Rate 11b: 1/2/5.
TL-WN881ND 300Mbps Wireless N PCI Express Adapter User Guide 33 Appendix B: Glossary ¾ 802.11b - The 802.11b standard specifies a wirele ss product networking at 11 Mbps using direct-sequence spread-s pectrum (DSSS) technology and oper ating in the unlicensed radio spectrum at 2.
TL-WN881ND 300Mbps Wireless N PCI Express Adapter User Guide 34 ¾ Spread Spectrum - Spread Spectrum technology is a wideband radio frequency technique developed by the military for use in reliable, se cure, mission-critical communications systems. It is designed to trade off bandwidth efficiency for reliability, integrity, and security.
An important point after buying a device TP-Link TL-WN881ND (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought TP-Link TL-WN881ND yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data TP-Link TL-WN881ND - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, TP-Link TL-WN881ND you will learn all the available features of the product, as well as information on its operation. The information that you get TP-Link TL-WN881ND will certainly help you make a decision on the purchase.
If you already are a holder of TP-Link TL-WN881ND, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime TP-Link TL-WN881ND.
However, one of the most important roles played by the user manual is to help in solving problems with TP-Link TL-WN881ND. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device TP-Link TL-WN881ND along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
