Instruction/ maintenance manual of the product TL-POE200 TP-Link
Go to page of 12
User Guide TL-POE200 Power over Ethernet Adapter Kit Rev:1.0.0 7106500904.
COPYRIGHT & TRADEMARKS Specifications are subjec t to change without notice. is a registered trademark of TP-LINK TECHNOLOGIES CO., LTD. Other brands and p roduct names are trademarks or registered trademarks of their respective holders.
FCC STATEMENT This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
Any changes or modifications no t expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. CE Mark Warning This is a class B product. In a domestic environment, this product may cause radio interference, in which case the user may be required to take adequate measures.
CONTENTS Package Contents .......................................................................... 1 Chapter 1 Introduction ................................................................. 1 1.1 Ov erview of the P roduction ........................
1 Package Contents The following items should be found in your package. ¾ TL-POE200 Power over Ethernet Adapter Kit ¾ Ethernet (CAT5 UTP) Cable ¾ Female-to-Female Power Connect or ¾ 48V DC Power Adapter ¾ This User Guide ) Note: Make sure that the package contains the above items.
2 1.2 Features ¾ Complies with IEEE 802.3, IEEE 802.3u standards ¾ Transmits electrical power al ong with data in one single cable ¾ Supports optional 5V DC , 9V DC or 12V DC power supply ¾ Suppor.
3 2.2 PoE Splitter LA N IN : Connect to a network device (such as a Switch or Router) with CA T5 UTP cable. DC 48V : Connect to the provided power adapter which can supply steady power of 48V DC. PWR: Power LED, a steady green light indicates that the power adapter is working properly .
4 ) Note: TL-POE200 Power over Ethernet Kit is not compliant with IEEE 802.3af standard. The TL-POE200A (PoE I njector) and TL-POE200B (PoE Splitter) can only be operat ed together.
5 Step 1: Insert one end of a Cat 5 Ethernet RJ45 Cable into the LA N IN port of the PoE Injector, and connect the other end of the cable to you network Switch or PC. ) Note: Do not mistake the LA N IN port with the POWER+DATA OUT port. Plugging the Ethernet cable into the wrong Ethernet port may cause serious damage to your network devices.
6.
7 Appendix: Specifications Normal Standards IEEE 802.3, IEEE 802.3u, CSMA/CD, TCP/IP Voltage Output DC 5V, 9V or 12V Output Power 12V/1A, 9V/1.2A, 5V/2.
An important point after buying a device TP-Link TL-POE200 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought TP-Link TL-POE200 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data TP-Link TL-POE200 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, TP-Link TL-POE200 you will learn all the available features of the product, as well as information on its operation. The information that you get TP-Link TL-POE200 will certainly help you make a decision on the purchase.
If you already are a holder of TP-Link TL-POE200, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime TP-Link TL-POE200.
However, one of the most important roles played by the user manual is to help in solving problems with TP-Link TL-POE200. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device TP-Link TL-POE200 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
