Instruction/ maintenance manual of the product TL-PA2010 TP-Link
Go to page of 28
TL-P A2010 A V200 Nano Powerline Adapter Rev: 1.0.1 1910010708.
COPYRIGHT & TRADEMARKS S pecifications are subject to change without notice. is a registered trademark of TP-LINK TECHNOLOGIES CO., L TD. Other brands and product names are trademar ks or registered trademarks of their respective holders.
FCC STATEMENT This equipment has been tested and found to comply with the limits for a Class B digit al device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installa tion.
III This product can be used in the following countries: A T BG BY CA CZ DE DK EE ES FI FR GB GR HU IE IT L T L V MT NL NO PL PT RO RU SE SK TR UA.
TP-LINK TECHNOLOGIES CO., L TD DECLARATION OF CONFORMITY For the following equipment: Product Description: A V200 Nano Powerline Adapter Model No.: TL-P A2010 T rademark: TP-LINK We declare under our .
V CONTENTS Package Contents ........................................................................................................................................... 1 Chapter 1 Introduction ......................................................
TL-P A2010 A V200 Nano Powerline Adapter 1 Package Contents The A V200 Nano Powerline Adapter pack age contains the fo llowing items: ¾ One A V200 Nano Powerline Adapter (There are two A V200 Nano Po.
TL-P A2010 A V200 Nano Powerline Adapter 2 Chapter 1 Introduction Congratulations on your purchase of this outstandi ng Powerline Adapter . This device is an A V200 Nano Powerline Adapter which transforms your house’s exis ting electrical wiring into a ubiquitous networking infrastructure.
TL-P A2010 A V200 Nano Powerline Adapter 3 8. Plug this product directly into a wall socket (100V ac~240V ac). Do not use an extension cord between this product and the AC power source. 9. When plugging this product into a wall socket, make sure that the electric al socket is not damaged, and that there is no gas leakage.
TL-P A2010 A V200 Nano Powerline Adapter 4 Chapter 2 Connecting Mechanism 2.1 Introduction The Powerline Adapter supports up to 200Mbps data ra te. With this high speed connec tion rate, this Powerline Adapter allows you to setup a hig h speed home network by usi ng your home existing electrical wiring.
TL-P A2010 A V200 Nano Powerline Adapter 5 On The Ethernet port is connect ed, but there is no data being transferred. Blinking The Ethernet port is transferring data.
TL-P A2010 A V200 Nano Powerline Adapter 6 ) Note: 1. If you press the Pair button for more than 10 se conds, the Powerline Adapter will leave the network which it is associated with and its network name assumes a random value. The Power LED turns of f when it disconnects from the Powerline network.
TL-P A2010 A V200 Nano Powerline Adapter 7 2.6 Hardware Connection – Internet This section describes how to connect the Powe rline Adapter into your existing ADSL broadband connection via ADSL Ethernet port.
TL-P A2010 A V200 Nano Powerline Adapter 8 ) Note : Do not connect the Powerline adapter to an extens ion lead, powe r strip, extension cord, or surge protector as these may degr ade the network performance.
TL-P A2010 A V200 Nano Powerline Adapter 9 Chapter 3 Inst alling Management Utility Please verify that no other Powe rline Adapter or any Encryption Management Utilities are installed before installing the provided software.
TL-P A2010 A V200 Nano Powerline Adapter 10.
TL-P A2010 A V200 Nano Powerline Adapter 11.
TL-P A2010 A V200 Nano Powerline Adapter 12 S tep 3: After the inst allation, a shortcut to the “Powerline Utility” application icon is provided on the windows desktop.
TL-P A2010 A V200 Nano Powerline Adapter 13 Chapter 4 Using the Management Utility After you’d successfully installed the Powerline Adapter hardware and Managem ent Utility software, you can set up or configure the devic es according to your need.
TL-P A2010 A V200 Nano Powerline Adapter 14 ¾ MAC Address: Displays the MAC address of the pow erline adapter connected to the current computer where this m anagement utility is running. ¾ Network Name: Displays the network name of the current n etwork or you can give a name for th e network in which the powerline adapter is.
TL-P A2010 A V200 Nano Powerline Adapter 15 network. Furthermore, here you can change the N ame of the listed powerline adapters as well as add another device to the current network. ¾ Typ e: Displays the type of the remote device found in the network.
TL-P A2010 A V200 Nano Powerline Adapter 16 network name of this device on System configuration homepage. To change the name of the remote adapter or enter its password, please follow the steps below: (1) Select the desir ed device and click the Modify butto n to display the following dialog.
TL-P A2010 A V200 Nano Powerline Adapter 17 4.3 System The System tab window is for some basic settings of the adapter . On this tab window , you can upgrade the firmware to the latest versi on, reset the adapter ’s settings to t he factory default s and configure all adapters’ network names.
TL-P A2010 A V200 Nano Powerline Adapter 18 z NVM : None-volatile memory. It is us ed for upgrading the firmware. z PIB : Parameter Information Block. It contains configuration values that establish device network identity, general capab ilities and operational modes.
TL-P A2010 A V200 Nano Powerline Adapter 19 appear on the Network configuration homepage whose Device’s Password had been entered for the same logical network.
TL-P A2010 A V200 Nano Powerline Adapter 20 Chapter 5 Advanced Feature: How to Use the Pair Buttons 5.1 Pair ( Secure with 128 bits-AES) The Homeplug A V standard uses 128-bit AES (Advanc ed Encryption S tandard) to safely transmit data between powerline adap ters.
TL-P A2010 A V200 Nano Powerline Adapter 21 Join an existing Powerline A V Network: Powerline adapter A and Powerline adapter B form a HomeplugA V Network, Powerline adapter C wants to join this network. Ste p 1 . Press and hold the Pair button on Powerline adapter C for 1 second.
TL-P A2010 A V200 Nano Powerline Adapter 22 Appendix A: T roubleshooting The Troubleshooting provides answers to comm on problems regardin g the Powerline Adapter. 1. The Pow er LED does not light up. Ans. Check the following: a) Make sure that the Powerline Adapter is properly plugged into a power outlet.
An important point after buying a device TP-Link TL-PA2010 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought TP-Link TL-PA2010 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data TP-Link TL-PA2010 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, TP-Link TL-PA2010 you will learn all the available features of the product, as well as information on its operation. The information that you get TP-Link TL-PA2010 will certainly help you make a decision on the purchase.
If you already are a holder of TP-Link TL-PA2010, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime TP-Link TL-PA2010.
However, one of the most important roles played by the user manual is to help in solving problems with TP-Link TL-PA2010. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device TP-Link TL-PA2010 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
