Instruction/ maintenance manual of the product Network Camera Toshiba
Go to page of 24
NETWORK CAMERA Model: IK-WR14A Quick Start Guide and Important Safeguards This guide describes the hardware installation. Refer to the user's manual (PDF le) contained in the CD-ROM for settings, operations and other information. The application Adobe Reader is needed to view PDF les.
2 2 Introduction FCC (USA)-INFORMA TION NOTE: This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment.
3 Thank you for purchasing the IK-WR14A Network Camera. Before using the camera, read this quick start guide carefully to ensure correct usage. After reading this quick start guide, save it for future reference. The design, specications, software, and quick start guide contents are subject to change without prior notice.
4 4 T able of Contents Introduction 2 FCC (USA)-INFORMA TION ....................................................................................... 2 T erms and T rademarks .............................................................................
5 Important Safeguards 1. Read Instructions Read all the safety and operating instructions before operating the product. 2. Retain Instructions Retain the safety instructions and user's manual for future reference. 3. W arnings Comply with all warnings on the product and in the user's manual.
6 6 12. Lightning For additional protection on this camera during a lightning storm, or when it is left unattended and unused for long periods of time, unplug it from the wall outlet and disconnect the power supply and cable system. This will prevent damage to the camera due to lightning and power-line surges.
7 Important Safeguards (Cont.) CAUTION T O REDUCE THE RISK OF ELECTRIC SHOCK. DO NOT REMOVE COVER. NO USER SER VICEABLE P ARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
8 8 Notes on Use and Installation l Do not aim the camera at the sun Never aim the camera at the sun even with the camera power off. l Do not shoot intense light Intense light such as a spotlight may cause a bloom or smear . A vertical stripe may appear on the screen.
9 9 Setting the Network Camera Environment Items needed for network camera monitoring l Administrator's personal computer The personal computer that allows setting, operating, monitoring and other functions with the network camera is called the "administrator's personal computer" in this guide.
10 10 l IK-WR14A l W aterproof Connector & Bushing l A V Out cable l W arranty Card l Quick Start Guide and Important Safeguards l Gasket, T orx Wrench, Silica Gel and tape, Hex Nut , Screws and A.
1 1 1 1 Physical Description Cover screws Side Opening Cover Dome Cover Replace the side opening cover with the supplied bushing if you want to route cables from the side of camera. The 1/2" (12.7mm) protection conduits and tubing are not supplied.
12 l Front View CAMERA BASE l Rear View IR LEDs (SR-LED) Focus Button Light Sensor Lens Status LED Mounting screws Micro SD/ SDHC Card Slot Recessed Reset Button DIP switch Audio/Video Out (Printed &q.
13 Hardware Installation Bottom of the Camera First, use the supplied torx wrench to detach the dome cover from the camera base. Then, follow the steps below to install the camera; either to a ceiling or to a wall. Connect the appropriate power cables and external devices such as sensors and alarms, to the general I/O terminal block.
14 14 14 1 . Disassemble the components of the waterproof connector into parts (A) ~ (E) as shown above. And Hex Nut is including in the accessory separately . 2. Place the screw nut (E) as shown. 3 . Feed the power cables through the waterproof connector (F --> E --> D --> B --> A) as the ill ust rat io n sh ows .
15 NO TE 4 3 o O g B b G br BR 1 2 3 4 5 6 7 8 o: white/orange stripe O: orange solid g: white/green stripe B: blue solid b: white/blue stripe G: green solid br: white/brown stripe BR: brown solid 3. Y ou will need an RJ45 crimping tool to attach the Ethernet wires to a connec- tor .
16 l Installation should be done only by qualied personnel and conform to all local codes. l Install this camera on a rm and solid part of the ceiling or wall. If installed improperly or on a weak surface, the camera could fall causing injury and damage.
17 POWE R COLLIS ION LIN K RE CEIV E P AR TITIO N 1 2 3 4 5 POWE R COLLIS ION LIN K RE CEIV E P AR TITIO N 1 2 3 4 5 POW ER COL L ISION LIN K RE CEIV E PAR TITIO N 1 2 3 4 5 POW ER COL L ISION LIN K R.
18 POW ER COL LIS ION LINK RE CEIV E PAR TITIO N 1 2 3 4 5 AC24V or DC12V adapter UL Listed Class 2 power supply (not supplied) 18 18 1 2 Ethernet switch (not supplied) General Connection (without PoE) 1. Connect the camera to an Ethernet switch via LAN cable.
19 19 19 Installation Wizard 1. Install the "Installation Wizard" under the Software Utility directory from the CD- ROM. 2. The program will analyze your network environment. After your network is analyzed, please click on the "Next" button to continue the program.
20 20 For more information on camera conguration, please refer to use r's manual on the CD-ROM. 1. Access the Network Camera from the network. 2.
21 21 Adjusting the Lens Based on the live image retrieved from the camera, adjust the camera lens by performing the following: T o adjust the viewing angle 1. T urn the lens module left and right. 2. Loosen the tilt adjustment screws on both side of the camera and then turn the lens module up and down.
22 22 Dome cover 1. Attach the dome cover to the camera and aligning with the mounting holes. 2. Y ou will nd a silica gel bag attached to the dome cover . Remove the supplied sili ca gel from the aluminum foil bag, and replace it t o new silica gel with supplied double-sided tape.
23 23 Access the Network Camera from the browser interface, and click the conguration button onthe main page. Then click the following: Audio and Video Image Zoom and Focus T o adjust the z oom factor and focus range 1. Use the Zoom slide bar to nd an optimal view of the area of interest where you want to adjust its focus.
TOSHIBA AMERICA INFORMA TION SYSTEMS, INC. Surveillance & IP V ideo Products 9740 Irvine Boulevard, Irvine, CA 92618-1697 Phone Number: (877) 855-1349 625016700G.
An important point after buying a device Toshiba Toshiba Network Camera (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Toshiba Toshiba Network Camera yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Toshiba Toshiba Network Camera - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Toshiba Toshiba Network Camera you will learn all the available features of the product, as well as information on its operation. The information that you get Toshiba Toshiba Network Camera will certainly help you make a decision on the purchase.
If you already are a holder of Toshiba Toshiba Network Camera, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Toshiba Toshiba Network Camera.
However, one of the most important roles played by the user manual is to help in solving problems with Toshiba Toshiba Network Camera. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Toshiba Toshiba Network Camera along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
