Instruction/ maintenance manual of the product IK-WR12A Toshiba
Go to page of 24
NETWORK CAMERA Model: IK-WR12A Quick Start Guide and Important Safeguards This guide describes the hardware installation. Refer to the user's manual (PDF le) containe d in the CD-ROM for settings, operations and other information. The application Adobe Reader is needed to view PDF les.
2 2 Introduction FCC (USA)-INFORMA TION NOTE: This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment.
3 Thank you for purchasing the IK-WR12A Network Camera. Before you start using the camera, read this quick start guide carefully to ensure correct usage. Once you have nished reading this quick start guide, keep it in a convenient place for future reference.
4 4 T able of Contents Introduction Introduction ....................................................................................................... 2 FCC (USA)-INFORMA TION .........................................................................
5 Important Safeguards 1. Read Instructions Read all the safety and operating instructions before operating the product. 2. Retain Instructions Retain the safety instructions and user's manual for future reference. 3. W arnings Comply with all warnings on the product and in the user's manual.
6 6 Important Safeguards (Cont.) 10. Power-Cord Protection Power cords should be routed so that they are not likely to be walked on or pinched by items placed upon or against them. Pay particular attention to cords at plugs, screws and the point where they exit the product.
7 16. Damage Requiring Service Disconnect this video product from the power supply and refer servicing to qualied service personnel under the following conditions. a. When the power-supply cord or plug is damaged. b. If liquid has been spilled, or objects have fallen into the video product.
8 8 Important Safeguards (Cont.) CAUTION T O REDUCE THE RISK OF ELECTRIC SHOCK. DO NOT REMOVE COVER. NO USER SER VICEABLE P ARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
9 9 Notes on Use and Installation l Do not aim the camera at the sun Never aim the camera at the sun even with the camera power off. l Do not shoot intense light Intense light such as a spotlight may cause a bloom or smear . A vertical stripe may appear on the screen.
10 10 Setting the Network Camera Environment Items needed for network camera monitoring l Administrator's personal computer The personal computer that allows setting, operating, monitoring and other functions with the network camera is called the "administrator's personal computer" in this guide.
11 11 IK-WR12A l IK-WR12A l W arranty Card l AC Adapter l Quick Start Guide and Important Safeguards l CD-ROM l L-type Hex Key Wrench / RJ45 Female/Female Coupler / Slica Gel / Screws Contents Content.
12 12 12 SD/SDHC Card Slot IR LEDs Reccessed Reset Button N.C. N.C. N.C. AC24V AC24V Focus Controller Zoom Controller Status LED Light Sensor Pan Adjustment Screw Inner View Ethernet 10/100 RJ45 Plug .
13 N.C. N.C. N.C. AC24V AC24V 13 714270 5678 Bottom Base Outer View Dome Cover Camera Base a Record the MAC address under the camera base before installing the camera. b c Hole a~c: Holes to secure the bottom base. a b c T reat the dome cover with care when installing, Or it may be damaged.
14 14 14 First, use a hex key wrench to loosen the three screws and deta ch the dome cover from the camera base. Then, follow the steps below to install the camera to either a ceiling or a wall. Ceiling mount (with the bottom base) 1. Attach the supplied alignment sticker to the ceiling.
15 15 15 Wall mount (with the bottom base) 1. Attach the supplied alignment sticker to the wall. 2. Using the 10 circles on the sticker , drill at least 2 pilot holes symmetrically on each side into the wall. Then hammer the four supplied plastic anchors into the holes.
16 16 Drop-ceiling mount (without the bottom base) 1. Attach the supplied ceiling hole template sticker to the ceiling. 2. Open a hole along the inner circle of the sticker . 3. Using the 3 circles on the sticker , drill 3 pilot holes into the ceiling.
17 17 Network Deployment General Connection (without PoE) N.C. N.C. N.C. AC24V AC24V POW E R C O LL I S ION L I N K RE CEIV E PART ITIO N 1 2 3 4 5 1. If you have external devices such as sensors and alarms, make the connection from the general I/O terminal block.
18 18 Po wer o ver Ether net (P oE) PO W ER COLLI SI O N LINK REC EI V E PART I TI O N 1 2 3 4 5 N.C. N.C. N.C. AC24V AC24V PoE Switch (not supplied) PO W ER COLLI SI ON LINK RE C E I V E PART I TION 1 2 3 4 5 N.C. N.C. N.C. AC24V AC24V When using a non-PoE switch Use a PoE power injector to connect between the Network Camera and a non-PoE switch.
19 19 MAC:0002D1714270 0002D1714270 00-02-D1-71-42-70 169.254.0.99 IK-WR12A Installation Wizard 1. Install the "Installation Wizard" under the Software Utility directory from the CD- ROM. 2. The program will analyze your network environment.
20 20 For more information on camera conguration, please refer to user's manual on the CD-ROM. 2010/09/01 16:34:42 1. Access to the Network Camera from the network.
21 21 Adjusting the Lens Based on the live image retrieved from the camera, adjust the camera lens by doing the following: W T 8 N DO NOT overrotate the lens. Doing so will damage the camera lens module. T o adjust the viewing ang le -- 3-axis mec hanism design 1.
22 22 Completion 1. Rotate the black cover inside the dome cover to t the lens shooting direction. 2. Attach the dome cover to the camera. 3. Secure the three dome screws with the supplied hex key wrench. Finally , make sure all parts of the camera are securely installed.
23 Notes.
TOSHIBA AMERICA INFORMA TION SYSTEMS, INC. Surveillance & IP V ideo Products 9740 Irvine Boulevard, Irvine, CA 92618-1697 Phone Number: (877) 855-1349 625012200G.
An important point after buying a device Toshiba IK-WR12A (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Toshiba IK-WR12A yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Toshiba IK-WR12A - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Toshiba IK-WR12A you will learn all the available features of the product, as well as information on its operation. The information that you get Toshiba IK-WR12A will certainly help you make a decision on the purchase.
If you already are a holder of Toshiba IK-WR12A, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Toshiba IK-WR12A.
However, one of the most important roles played by the user manual is to help in solving problems with Toshiba IK-WR12A. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Toshiba IK-WR12A along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
