Instruction/ maintenance manual of the product 02222FX Behringer
Go to page of 17
Version 1.0 January 2006 Users Manual XENYX 1622FX 1832FX 2222FX 2442FX.
2 XENYX 1622FX/1832FX/2222FX/2442FX This symbol, wherever it appears, alerts you to the presence of uninsulated dangerous voltage inside the enclosurevoltage that may be sufficient to constitute a risk of shock. This symbol, wherever it appears, alerts you to important operating and maintenance instructions in the accompanying literature.
3 XENYX 1622FX/1832FX/2222FX/2442FX Dear Customer, I'm sure you're one of those people who have devoted themselves body and soul to your chosen area and no doubt this has made you an expert in your field. Well, for over 30 years, my passion has been music and electronics.
4 XENYX 1622FX/1832FX/2222FX/2442FX ideally suited for use as a karaoke machine. This feature is also an optimal solution for singers who need accompanying music for their rehearsals. USB/Audio interface The USB interface supplied with the unit is a perfect match for the XENYX Series and serves as a powerful recording interface to your PC or MAC®.
5 XENYX 1622FX/1832FX/2222FX/2442FX s Mix : All other mixing console functions fall under this vital category. Creating a mix means primarily adjusting the volume levels of individual instruments and voices to one another as well as giving them the appropriate weight within the overall frequency spectrum.
6 XENYX 1622FX/1832FX/2222FX/2442FX the MID control to set the amount of boost or cut, and the FREQ control to determine the central frequency. 2.1.3 Monitor and effects busses (Aux sends) Fig .
7 XENYX 1622FX/1832FX/2222FX/2442FX 2.1.4 Routing switch, PAN, SOLO and channel fader Fig. 2.4: The panorama and routing controls and the channel fader PA N The PAN control determines the position of the channel signal within the stereo image.
8 XENYX 1622FX/1832FX/2222FX/2442FX + If you want to monitor the signal of just one AUX bus, none of the other SOLO SWITCHES should be pressed and the MODE switch should be in the SOLO position (not depressed).
9 XENYX 1622FX/1832FX/2222FX/2442FX return (created using the channel FX sends). If these jacks are already in use as additional inputs, you can route the effects signal back into the console via a different channel. The advantage of this is that you can now use that channels EQ on the effects return signal.
10 XENYX 1622FX/1832FX/2222FX/2442FX Use the STEREO AUX RETURN FX control to determine the level of the signal routed from the AUX RETURN FX jacks to the main mix. If nothing is connected to these jacks, the output of the built-in effects module will appear.
11 XENYX 1622FX/1832FX/2222FX/2442FX via the high-precision MAIN MIX fader. + If you connect a compressor or a noise gate post 2-track output, the main mix fader will probably not be able to create a satisfactory fade-out effect. 2.3.9 Lamp socket (2442FX only) Use this BNC socket to connect a gooseneck lamp (12 V DC, max.
12 XENYX 1622FX/1832FX/2222FX/2442FX PHONES jack You can connect headphones to this 1/4" stereo jack (2442FX: 2 phones jacks). The signal routed to the PHONES connection is the same as that routed to the control room output.
13 XENYX 1622FX/1832FX/2222FX/2442FX sufficiently high level. Take care to ensure that the clip LED only lights up at peak levels. If it is lit constantly, you are overloading the effects processor and this could cause unpleasant distortion. PROGRAM You can select the effect preset by turning the PROGRAM control.
14 XENYX 1622FX/1832FX/2222FX/2442FX which meets the required safety standards. Blown fuses must only be replaced by fuses of the same type and rating. The mains connection is made via a cable with IEC mains connector. An appropriate mains cable is supplied with the equipment.
15 XENYX 1622FX/1832FX/2222FX/2442FX Fig. 6.4: 1/4" stereo plug Fig. 6.5: Insert send/return stereo plug Fig. 6.6: Stereo plug for headphones connection 6.
16 XENYX 1622FX/1832FX/2222FX/2442FX 7. SPECIFICATIONS Microphone inputs (XENYX Mic Preamp) T ype XLR, electronically balanced, discrete input circuit Mic E.I.N. (20 Hz - 20 kHz) @ 0 W source resistance -134 dB / 135.7 dB A-weighted @ 50 W source resistance -131 dB / 133.
17 XENYX 1622FX/1832FX/2222FX/2442FX 8. WARRANTY T echnical specifications and appearance subject to change without notice. The information cont ained herein is correct at the ti me of printing. The names of companies, institutions or publications pictured or mentioned and their respective logos are registered trademarks of their respective owners.
An important point after buying a device Behringer 02222FX (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Behringer 02222FX yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Behringer 02222FX - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Behringer 02222FX you will learn all the available features of the product, as well as information on its operation. The information that you get Behringer 02222FX will certainly help you make a decision on the purchase.
If you already are a holder of Behringer 02222FX, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Behringer 02222FX.
However, one of the most important roles played by the user manual is to help in solving problems with Behringer 02222FX. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Behringer 02222FX along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
