Instruction/ maintenance manual of the product CG10B Beckett
Go to page of 4
Suggested Specification For Model CG10, CG10A & CG10B Beckett Gas Burners R.W. Beckett Corporation _ _______________ _______________ _______________ _______________ _______________ _______________ _______________ ______________ ________________ _______________ _______________ _______________ _______________ _____________ Mail: P.
General Burner Description: Install __________ Beckett Model ________ Gas Burner for ced draft flame retention power gas burners. Burners shall be capable of burni ng ______BTUs (natural gas or propane) with a specific gravity of ____(0.64 or 1.56). Gas Pressure supplied to the burner gas train connection shall be a minimum of _____ inches W.
Mode of Operation: On-Off with low fire start- The main gas supply shall be controlled by a diaphragm re gulating gas valve. The air inlet control band and shu tter shall be fixed at th e optim um fuel/air ratio at the high fire position.
Burner Start Up Information & Test Data Beckett Model ____________________ Serial Number_______________________ Job Location_____________________________________________________________ Start Up D.
An important point after buying a device Beckett CG10B (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Beckett CG10B yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Beckett CG10B - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Beckett CG10B you will learn all the available features of the product, as well as information on its operation. The information that you get Beckett CG10B will certainly help you make a decision on the purchase.
If you already are a holder of Beckett CG10B, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Beckett CG10B.
However, one of the most important roles played by the user manual is to help in solving problems with Beckett CG10B. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Beckett CG10B along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
