Instruction/ maintenance manual of the product 100 Beckett
Go to page of 12
Beckett A MODEL FII Oil Burner Instruction Manual A FII AFII burner with type “HLX” air tube AFII 85, AFII 100, AFII 150 Types “HLX” & “FBX” air tube combinations Voltage: 120 Vac / 60.
Instruction Manual – Model AFII Oil Burner Beckett Contents Prepare before installing Verify specifications ……………………………….…………………..…….………….. 3 Be aware of hazard definitions …………….…………….
Beckett Instruction Manual – Model AFII Oil Burne r Prepare before installing Be aware of hazard definitions Verify specifications Denotes presence of a hazard which, if ignored, will result in severe personal injury, death, or subs tantial property damage.
Instruction Manual – Model AFII Oil Burner Beckett Inspect/prepare installation site Inspect/prepare installation site (continued) Exhaust fans and other air-using devices Chimney or v ent • Inspect the chimney or vent, making sure it is properly s ized and in good condition for use.
Beckett Instruction Manual – Model AFII Oil Burne r Prepare burner & site Prepare burner • Use a wrench or vise to hold the nozz le adapter. DO NOT attempt to remove or replace nozzle without holding adapter. The nozz le alignment could be serious ly damaged.
Instruction Manual – Model AFII Oil Burner Beckett Figure 3 - HLX Arrangement 6 AIR DIAL SETTING Stop Screw AFII 85 AFII 100 AFII 150 0 0.40-0.65 0.50-0.65 0.75-1.00 1 - 0.60-0.75 0.85-1.10 2 - 0.65-0.80 0.95-1.15 3 0.60-0.75 0.65-0.90 0.95-1.20 4 - 0.
Beckett Instruction Manual – Model AFII Oil Burne r Figure 4 - FBX Arrangement 7 AIR DIAL SETTING Firing Rate at 140 psig AFII 85 AFII 100 AFII 150 0.40 to 0.65 3 - - 0.60 to 0.75 4 3 - 0.70 to 0.85 5 4 - 0.75 to 1.00 - 5 2 0.95 to 1.20 - - 3 1.15 to 1.
Instruction Manual – Model AFII Oil Burner Beckett Adjust, pipe, & wire burner Connect fuel lines (continued) Mount burner on appliance Mounting options The oil supply inlet pressure to the fuel unit cannot exceed 3 psi. Install a pressure-limiting devic e in accordance with NFPA 31.
Beckett Instruction Manual – Model AFII Oil Burne r Adjust, pipe, & wire burne r Figure 7 – Typical wiring, R7184 or equivalent primary control Table 5 – R7184 primary control features Figure 6 – Typical wiring, R8184G or equivalent primary control Electrical shock haz ard.
Instruction Manual – Model AFII Oil Burner Beckett Startup & adjust burner Service & maintain burner Startup burner/set combustion Perform regular maintenance Do not attempt to start the burner when ex cess fuel or vapor has accumulated in the appliance.
Beckett Instruction Manual – Model AFII Oil Burne r Replacement parts SK8265B Service & main burn PA RT DESCRIPTION PA RT NO. Air tube combination (ATC) – see Table 1 Specify Blow er w heel: A.
12 Instruction Manual – Model AFII Oil Burner Beckett Service & maintain burner Owner’s information Owner service and maintenance This burner must be installed, adjusted and s tarted only by a.
An important point after buying a device Beckett 100 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Beckett 100 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Beckett 100 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Beckett 100 you will learn all the available features of the product, as well as information on its operation. The information that you get Beckett 100 will certainly help you make a decision on the purchase.
If you already are a holder of Beckett 100, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Beckett 100.
However, one of the most important roles played by the user manual is to help in solving problems with Beckett 100. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Beckett 100 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
