Instruction/ maintenance manual of the product CF 2300A Beckett
Go to page of 16
23 0 0 MODEL MODEL MODEL MODEL MODEL CF 2300A Instruction M anual Oil Burner Thank you for purchasing a Beckett burner . With proper care and regular maintenance, it will provide years of trouble-free service. Please take a few minutes to read the section entitled “T o the owner” inside this manual.
Instruction Manual – Model CF2300A Oil Burner 2 Form 6104 BCF-23-R0399 Please . . . r ead this page first Denotes presence of a hazard which, if ignored, could result in minor personal injury or property damage.
Instruction Manual – Model CF2300A Oil Burner 3 Form 6104 BCF-23-R0399 W arranty Beckett warrants its equipment to those who have purchased it for resale, including your dealer . If you hav e any problems with your equipment or its installation, you should contact your dealer for assistance.
Instruction Manual – Model CF2300A Oil Burner 4 Form 6104 BCF-23-R0399 Pr e-installation checklist T able 1 – Nozzle capacities at various pressures ❏ Combustion air supply • The burner requires combustion air and ventilation air for reliable operation.
Instruction Manual – Model CF2300A Oil Burner 5 Form 6104 BCF-23-R0399 T able 2 – Air tube capacity vs. firebox pressure Figure 2 – Air tube mounting dimensions 2304 E D G T 2° 1 F E Insertion depth G Air tube to inside of chamber – 0.25" ± 0.
Instruction Manual – Model CF2300A Oil Burner 6 Form 6104 BCF-23-R0399 Mount the bur ner ❏ Mount flange(s) on air tube • This section does not apply to burners with welded flanges. • Do not install air tube on burner . • For non-pressure firing flange , refer to Figure 3 : Install gasket (item a ) and flange (item d ).
Instruction Manual – Model CF2300A Oil Burner 7 Form 6104 BCF-23-R0399 Figure 5 – Nozzle line assembly in burner ❏ ❏ ❏ ❏ ❏ Set dimension Z • Replace the rear access door on the bu rner , making sure that the adjust- ing plate assembly is now securely held in place.
Instruction Manual – Model CF2300A Oil Burner 8 Form 6104 BCF-23-R0399 Connect fuel line(s) ❏ Fuel unit by-pass plug • The CF2300A burner is shipped with a by-pass plug in- stalled in the fuel unit.
Instruction Manual – Model CF2300A Oil Burner 9 Form 6104 BCF-23-R0399 Figure 9a – T wo-pipe oil flow , low fire, “ H ” pump • Use continuous lengths of heavy-wall copper tubing, routed under the floor where possible. Do not attach fuel lines to the appliance or to floor joists if possible.
Instruction Manual – Model CF2300A Oil Burner 10 Form 6104 BCF-23-R0399 Legend FD Fused disconnect, by others LM Limit controls, by others OP Operating controls, by others PR Oil primary control, R8.
Instruction Manual – Model CF2300A Oil Burner 11 Form 6104 BCF-23-R0399 Sequence of operation — typical NO TE: The following sequence is based on using a type B fuel unit, with pump-mounted by-pass valve. The by-pass valve operation is reversed for a type H fuel unit.
Instruction Manual – Model CF2300A Oil Burner 12 Form 6104 BCF-23-R0399 Pr epar e the bur ner for star t-up - continued ❏ Z dimension • Should be set per these instructions (see page 7). The top acorn nut ( Figure 11 , item d ) should never be loosened once the Z dimension is initially set.
Instruction Manual – Model CF2300A Oil Burner 13 Form 6104 BCF-23-R0399 T able 5 – Initial air adjusting plate settings (damper position) CLOSE OPEN 2309-1 a b d e f g Figure 12 – Air damper and.
Instruction Manual – Model CF2300A Oil Burner 14 Form 6104 BCF-23-R0399 Star t the bur ner Do not proceed unless all prior steps in this manual have been completed. Failure to comply could result in se v ere personal injury , death or substantial property damage.
Instruction Manual – Model CF2300A Oil Burner 15 Form 6104 BCF-23-R0399 Maintenance and ser vice Annual service — by qualified service technician Have the burner inspected, tested and started at least annually by a qualified service technician. This annual test/inspection should include at least the following: ❏ Replace oil nozzle.
Instruction Manual – Model CF2300A Oil Burner Form 6104 BCF-23-R0399 U.S.A.: P . O. Box 1289 • Elyria, Ohio 44036 • 800-645-2876 • 440-327-1060 • F AX 440-327-1064 Canada: R.
An important point after buying a device Beckett CF 2300A (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Beckett CF 2300A yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Beckett CF 2300A - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Beckett CF 2300A you will learn all the available features of the product, as well as information on its operation. The information that you get Beckett CF 2300A will certainly help you make a decision on the purchase.
If you already are a holder of Beckett CF 2300A, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Beckett CF 2300A.
However, one of the most important roles played by the user manual is to help in solving problems with Beckett CF 2300A. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Beckett CF 2300A along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
