Instruction/ maintenance manual of the product CF 1400 Beckett
Go to page of 16
14 0 0 Instruction M anual ON/OFF Operation Firing rate: 4.0 – 10.0 GPH Motor voltage: 120 / 60 Hz std. MODEL MODEL MODEL MODEL MODEL CF 1 400 Oil Burner Thank you for purchasing a Beckett burner . With proper care and regular maintenance, it will provide years of trouble-free service.
2 Form 6104 BCF14N-R0299 Instruction Manual – Model CF1400 Oil Burner Please . . . r ead this page first Hazard definitions The following will be used throughout this manual to bring attention to hazards and their risk factors, or to special informati on.
3 Form 6104 BCF14N-R0299 Instruction Manual – Model CF1400 Oil Burner Contents Please . . . read this page first ................ 2 Pre-installation checklist ........................... 4 Mount the burner .......................................... 6 Connect fuel line(s) .
4 Form 6104 BCF14N-R0299 Instruction Manual – Model CF1400 Oil Burner Pr e-installation checklist ❏ Combustion air supply • The burner requires combustion air and ventilation air for reliable operation. Assure that the building and/or com- bustion air openings comply with National Fire Protection Standard for Oil-Burning Equipment, NFP A 31.
5 Form 6104 BCF14N-R0299 Instruction Manual – Model CF1400 Oil Burner Figure 1 - Min. Combustion chamber dimensions 1405 A L Figure 2 - Air tube mounting dimensions E T D 2° 1404 G 1 E Insertion depth G Air tube to inside of chamber – 0.25" ± 0.
6 Form 6104 BCF14N-R0299 Instruction Manual – Model CF1400 Oil Burner Mount the bur ner ❏ Mount flange(s) on air tube • This section does not apply to burners with welded flanges. • Do not install air tube on burner . • For non-pressure firing flange , refer to Figure 3 : Install gasket (item a ) and flange (item d ).
7 Form 6104 BCF14N-R0299 Instruction Manual – Model CF1400 Oil Burner Figure 5 - Nozzle line assembly in burner Z 1408 a Measure dimension from front (flat) face of head to end of air tube, as sho wn. Z b c d Measure dimension Z from the flat surface between (not on) the raised f ins.
8 Form 6104 BCF14N-R0299 Instruction Manual – Model CF1400 Oil Burner Install the oil lines using the following guidelines. Failure to comply could lead to equipment damage and present a risk of severe personal injury , death or substantial property damage due to leakage of oil and potential fire hazard.
9 Form 6104 BCF14N-R0299 Instruction Manual – Model CF1400 Oil Burner Figure 9a – T wo-pipe oil flow with “H” pump 300 psig k g 1413ao d a b p 300 psig c Figure 9b – T wo-pipe oil flow with .
10 Form 6104 BCF14N-R0299 Instruction Manual – Model CF1400 Oil Burner Wir e the bur ner Install the burner and all wiring in accordance with the National Electrical Code and all applicable local codes or requirements. W ire the burner in compliance with all instructions provided by the appliance manufacturer .
11 Form 6104 BCF14N-R0299 Instruction Manual – Model CF1400 Oil Burner Sequence of operation — typical 1. On call for heat from the appliance operating controls (and the circuit from T to T of the R8184 closed), power is applied to the R8184 black wire ( BK ).
12 Form 6104 BCF14N-R0299 Instruction Manual – Model CF1400 Oil Burner Pr epar e the bur ner for star t-up - continued ❏ Z dimension • Should be set per these instructions (see page 7). The top acorn nut ( Figure 11 , item d ) should never be loosened once the Z dimension is initially set.
13 Form 6104 BCF14N-R0299 Instruction Manual – Model CF1400 Oil Burner Figure 12 – Air damper assembly T able 5 – Initial air adjusting plate settings (damper position) 12 0 1 2 3 4 5 6 7 8 9 10.
14 Form 6104 BCF14N-R0299 Instruction Manual – Model CF1400 Oil Burner Star t the bur ner Do not proceed unless all prior steps in this manual have been completed. Failure to comply could result in se v ere personal injury , death or substantial property damage.
15 Form 6104 BCF14N-R0299 Instruction Manual – Model CF1400 Oil Burner ❏ Set air adjusting plate ( Figure 12 ) 1. Allow the burner to run until the appliance has warmed suff iciently . 2. V isually chec k the flame. The flame should not be dark orange or smoky .
U.S.A.: P . O. Box 1289 • Elyria, Ohio 44036 • 800-645-2876 • 440-327-1060 • F AX 440-327-1064 Canada: R. W . Beckett Canada, Ltd. • 430 Lair d Road • Guelph, Ontario, N1G 3X7 • 800-665-.
An important point after buying a device Beckett CF 1400 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Beckett CF 1400 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Beckett CF 1400 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Beckett CF 1400 you will learn all the available features of the product, as well as information on its operation. The information that you get Beckett CF 1400 will certainly help you make a decision on the purchase.
If you already are a holder of Beckett CF 1400, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Beckett CF 1400.
However, one of the most important roles played by the user manual is to help in solving problems with Beckett CF 1400. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Beckett CF 1400 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
