Instruction/ maintenance manual of the product C-CV854D-3 CE TOA Electronics
Go to page of 17
V ANDAL RESIST ANT DA Y/NIGHT CAMERA C-CV854D-3 CU C-CV854D-3 CE INSTRUCTION MANUAL Thank you for purchasing TOA’s Vandal Resistant Day/Night Camera. Please carefully follow the instructions in this manual in order to ensure long, trouble-free use of your color camera.
2 T ABLE OF CONTENTS 1. SAFETY PRECAUTIONS ............................................................................... 3 2. GENERAL DESCRIPTION ............................................................................. 5 3. HANDLING PRECAUTIONS .
3 1. SAFETY PRECAUTIONS • Before installation or use, be sure to carefully read all the instructions in this section for correct and safe operation. • Make sure to observe the instructions in this manual as the conventions of safety symbols and messages regarded as very important precautions are included.
4 Indicates a potentially hazardous situation which, if mishandled, could result in moderate or minor personal injury, and/or property damage. CAUTION • Leave the installation of the unit to your TOA dealer because the installation requires expert experience and skills.
5 The TOA C-CV854D-3 are Vandal Resistant Day/Night Camera equipped with a Day/Night function. It functions as a color camera in the daytime and as a high-sensitivity monochrome camera in darkness, making it ideal for installation in locations that require around-the-clock monitoring.
6 LOCK [ Side view with a dome cover attached ] [ Bottom view with a dome cover attached ] [ Side view with an inner cover detached ] [ Bottom view with an inner cover detached ] 4 5 6 7 8 9 10 11 12 .
7 LOCK L OC K L-type wrench Dome cover Case 5. INST ALLA TION Notes · Do not remove the protective sheet attached to the dome cover until installation work is completed. Damage to the dome cover could result if the protective sheet is removed during installation.
Base gasket 8 Sealant material Sealant material (4) 2. Connect a coaxial cable to the Video output terminal, and connect the Camera power input cable and power wire from the power-supply unit. 3. Fix the camera unit to the ceiling or wall using the four mounting screws.
9 Fixing screw Pipe receptacle thread cover Cord bush Cord bush 2. Push in the cord bush attached to the camera unit from the back to pull out from the case. Run the cable and lead it out from the camera pipe receptacle thread hole. Push the cord bush.
10 Sealing tape Pipe Base gasket Approx.10 0 mm ( 3.9 inch ) Pipe receptacle thread cover 3. Attach the removed pipe receptacle thread cover to the threaded section at the upper surface of the camera unit. 4. Wrap two or more layers of sealing tape around the pipe’s threaded section, then screw the pipe into the camera’s threaded receptacle.
11 Heater power input The camera power input 24 V AC or 12 V DC Video output Video input Monitor : BNC plug Use the external power supply unit of the following rating when the camera is operated on 12 V DC. 12 V DC, over 1.0 A 24 V AC Red : Black : 6.
12 After angle adjustment completion, tighten both rotation lock screws. 5. Adjust the angle of view with the Zoom ring and adjust the focus with the Focus ring for the best possible picture reproduction. After lens adjustment completion, tighten both the Zoom ring fixing screw and the Focus ring fixing screw.
13 Mode Setting Switch (Factory-preset setting) 1 : Focus adjustment switch 2 : Backlight compensation switch 3 : Flickerless switch 4 : A TW/A WB selection switch 5 : Mode selection switch ON OFF 1 2.
14 Remedy · Switch on the main power. · Connect the cables correctly. · Solder BNC plugs correctly. · Switch on the main power. · Adjust the focus properly. · Remove dirt on the lens. · Adjust the level correctly. Focus the lens again after turning the Focus adjustment switch of the Mode switch to "ON" position.
C-CV854D-3 (CU) C-CV854D-3 (CE) For camera: 24 V AC, 50/60 Hz, or 12 V DC For Heater: 24 V AC, 50/60 Hz 4 W (300 mA) 1/3 type IT-CCD 768 (H) x 494 (V), 380,000 pixels 752 (H) x 582 (V), 440,000 pixels 2:1 interlace Horizontal: 15.734 kHz Horizontal: 15.
Printed in Vietnam 133-22-033-70.
After detaching the dome cover from the case, do not lift the camera unit by the inner cover. If lifted, the inner cover can be unhooked, and the camera could fall off, possibly resulting in personal injuries or causing damage to the camera.
An important point after buying a device TOA Electronics C-CV854D-3 CE (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought TOA Electronics C-CV854D-3 CE yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data TOA Electronics C-CV854D-3 CE - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, TOA Electronics C-CV854D-3 CE you will learn all the available features of the product, as well as information on its operation. The information that you get TOA Electronics C-CV854D-3 CE will certainly help you make a decision on the purchase.
If you already are a holder of TOA Electronics C-CV854D-3 CE, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime TOA Electronics C-CV854D-3 CE.
However, one of the most important roles played by the user manual is to help in solving problems with TOA Electronics C-CV854D-3 CE. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device TOA Electronics C-CV854D-3 CE along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
