Instruction/ maintenance manual of the product W307R Tenda
Go to page of 67
.
Copyright S tatement is the registered tr ademark of Shenzhen T enda T echnology Co., Ltd. All the product s and product names mentioned herein are the trademarks or registered trademarks of their respective holders. Copyright of the whole pr oduct as integration, including its accessories and software, belongs to Shenzhen T enda T echnology Co.
Content s Chapter 1: Introduction ...................................................................................................................... 1 Package Contents ...............................................................................
Chapter 6: Wireless Settings ........................................................................................................... 21 Wireless Mode .................................................................................................
Chapter 9: T raffic Control .............................................................................................................. 48 T raf fic Control ...........................................................................................
W ir eless-N Broadband Router Chapter 1: Introduction Thank you for choosing the W307R Wireless-N Broadband Router . It employs the advanced MIMO (Multi Input, Multi Output) technology and integrates .
W ir eless-N Broadband Router Chapter 2: Getting to Know the Wireless-N Broadband Router The Rear Panel Here is the description of the back panel. The RJ- 45 ports for cable connection and Reset button are located on the back panel as shown below .
W ir eless-N Broadband Router The T op Panel There are the Router ’s LED indicators on the top panel as shown below . LEDS: LED Indicator Status Description POWER Always ON The POWER indicator is Always ON when it is powered on and works properly. SYS Blinking The SYS is blinking regularly when the system works normally.
W ir eless-N Broadband Router Hardware Inst allation 1. Please connect the LAN port of the router to the network adapter of your computer with one cable. 2. Please use the delivery-attached power adapter to power the router . 3. Please connect your broadband line provided by your ISP to the W AN port of your router .
W ir eless-N Broadband Router Chapter 3: Getting to Connect the W ireless-N Broadband Router For easy and fast configuration, the following st eps for network configur ation are required. How to Set the Network Confi gurations for My Computer Right click “ My Netw ork Places ” and select “ Properties ”.
W ir eless-N Broadband Router Select “ Internet Protocol (TCP/IP) ” and click “ Properties ”. . Select “ Obt ain an IP address automatically ” and “ Obt ain DNS server address automatically ”. Click “ OK ” to save the configurations.
W ir eless-N Broadband Router Or select “ Use the following IP address ” and enter the IP address, Subnet mask, Default gateway as shown right. Of course, you need to input the DNS server addr ess provided by your ISP . Otherwise, you can use the Router ’s default gateway as the DNS proxy server .
W ir eless-N Broadband Router Input the “ ping 192.168.0.1 ” and press “ Enter ”. If the screen displays as the right figure, it means your PC is connected to your router successfully . If not, please make sure the hardware installation and network adapter are OK.
W ir eless-N Broadband Router Chapter 4 Basic Configurations This section is to show you how to configure your new Wireless-N Broadband Router through the Web-based Configuration Utility .
W ir eless-N Broadband Router Setup Wizard 10 Here is the “ Welcome to Setup W izard ” for configuring your Router quickly . Click “ Next ”. In this screen, select one mode of your Internet connection you use. If you are not clear , press the “ Detect ” button or contact your Internet Service Provider , and click “ Next ”.
W ir eless-N Broadband Router Connection Mode 2 : Dynamic IP (Via DHCP) If your connection mode is Dynamic IP , it means your IP address keeps changing every time you connect.
W ir eless-N Broadband Router If the L2TP offered by your ISP is S t atic IP : Please fill in the parameters provided by your ISP . After configuration, please click “Next”.
W ir eless-N Broadband Router It is rebooting now , please wait for a few minutes and DO NOT power of f it. Click the “ System S tatus ” in the left menu of the Web-based Utility to find out the current network and system information.
W ir eless-N Broadband Router Chapter 5: Advanced Settings This section is to conduct the advanced configurat ions for the Router , in cluding LAN Settings, W AN settings, MAC Address Clone and DNS Settings. LAN Settings MAC Address: The Router ’ s physical MAC address as seen on your local network, which is unchangeable.
W ir eless-N Broadband Router W AN Settings—PPPoE Connection Mode: Show your current connection mode. Account: Enter them provided by your ISP . Password: Enter them provided by your ISP . MTU: Maximum T ransmission Unit. It is the size of largest datagram that can be sent over a network.
W ir eless-N Broadband Router Internet during the time you fix. W AN Settings—S t atic IP If your connection mode, static IP is chosen, please enter the following addressing information. IP Address: Here enter the WAN IP address provided by your ISP .
W ir eless-N Broadband Router W AN Settings—L2TP L2TP Server IP: Enter the Server IP provided by your ISP . User Name: Enter L2TP username. Password: Enter L2TP p assword. MTU: Maximum T ransmission Unit, you may need to change it for opt imal performance with your specific ISP .
W ir eless-N Broadband Router W AN Settings—PPTP 18 PPTP Server IP: Enter the Server IP provided by your ISP . User Name: Enter PPTP username provided by your ISP . Password: Enter PPTP pa ssword provided by your ISP . Address Mode: Select “S tatic” if your ISP supplies you with the IP address, subnet mask, and gateway .
W ir eless-N Broadband Router MAC Address Clone Some ISPs require end-user's MAC address to access their network. This feature copies the MAC address of your network device to the Router . MAC Address: The MAC address to be registered with your Internet service provider .
W ir eless-N Broadband Router DNS Settings DNS is short for Domain Name System(or Service), an Internet service that translate domain names into IP addresses which are provided by your Internet Service Provider . Please consult your Internet Service Provider for details if you do not have them.
W ir eless-N Broadband Router Chapter 6: Wireless Settings This section mainly deals with th e wireless settings, including Basic Se ttings, Security Setting, Access Control and Advanced Settings. Wireless Mode AP Mode: router serves as an access point in this mode to be connected.
W ir eless-N Broadband Router MAC: T o connect certain AP , you need to know the AP's MAC address. By enabling Open Scanning button to find out the available AP’s MAC address. Channel: Y ou can use the channel same as the AP . By enabling Open Sc anning button to find out the available AP's channel.
W ir eless-N Broadband Router 23 KEY 2: If the KEY 2 is selected as default key , the key will be enabled. KEY 3: If the KEY 3 is selected as default key , the key will be enabled. KEY 4: If the KEY 4 is selected as default key , the key will be enabled.
W ir eless-N Broadband Router Basic Settings 24 Network Mode: Supports 802.1 1b/g mixed, 802.1 1b, 802.1 1g and 802. 1 1b/g/n mixed modes. Main SSID: Main Service Set Identifier . It’s the "name" of your wireless network. Minor SSID: Minor Service Set Identifier .
W ir eless-N Broadband Router 1. Mixed WEP WEP (Wired Equivalent Privacy), a basic encryption method, usually encrypts wireless data using a series of digital ke ys (64 bits or 128 bits in length).
W ir eless-N Broadband Router 2. WP A-Personal WPA (Wi-Fi Protected Access) , a Wi-Fi standard, is a more recent wireless encryption scheme, designed to im prove the security features of WEP.
W ir eless-N Broadband Router 3. WP A2-Personal WP A2 (W i-Fi Protected Access version 2) , It's more secure than Wired Equivalent Privacy (WEP) and easy to set up. WP A Algorithms: Select key Algorithms such as TKIP , AES and TKIP&AES. Pass Phrase: Enter the key which must have 8-63 ASCII characters.
W ir eless-N Broadband Router 5. WP A2-Enterprise This security mode is also used when a RADIUS server is connected to the Router . WP A Algorithms: Select key Algorithms such as TKIP and AES. Radius IP Address: Please input IP address of the radius server here.
W ir eless-N Broadband Router This security mode is used when a RADIUS server is connected to the Router . 802.1x, a kind of Port-based authenticat ion protocol, is an authentication type and stra tegy for users. The port can be either a physic port or logic port (such as VLAN).
W ir eless-N Broadband Router Session T imeout: The recertification time interval between the router and the server . The default value is 3600s. NOTE: To improve security level, do not use those word.
W ir eless-N Broadband Router WPS Settings 31 WPS (Wi-Fi Protected Setting) can be easy and quick to establish the connection between the wireless network clients and the Router through encrypted contents. The users only enter the PIN code to conf igure without selecting encryption method and entering secret keys by manual.
W ir eless-N Broadband Router In this mode, you can expand the scope of network by combining up to four other access points together, and every access point can still accept wireless clients.
W ir eless-N Broadband Router Router's AP MAC address table and the connecting client should be in Lazy, Repeater or client mode. Encrypt Type: You can select WEP mode, TKIP mode, AES mode for security here. Pass phrase: Enter the key , the key format according to encryption you selected.
W ir eless-N Broadband Router This section is to configure the advanced wireless setting of the Router , including the Radio Preamble, 802.1 1g/n Rate, Fragment ation Threshold, R TS Threshold, Beacon Period and DTIM Interval. BG protection Mode: Auto by default.
W ir eless-N Broadband Router 35 set output power to 100%. This will enhance security (malicious / unknown users in distance will not be able to reach your wireless router). WMM Cap able: It will enhance the data transfer performance of multimedia contents when they’re being transferred over wirel ess network.
W ir eless-N Broadband Router Wireless Access Control 36 T o secure your wireless LAN, the wireless ac cess control is actually based on the MAC address management. MAC Address Filter: If you want to access the Router from any external IP Address, please select the “Disable”.
W ir eless-N Broadband Router Wireless Connection S tatus This page is to show the current wireless access status. Click “Refresh” to update the wireless connection information. MAC Address: Shows the connecting PC’ s MAC address. Bandwid th: displays the channel bandwidth of the host to be connected.
W ir eless-N Broadband Router Chapter 7: DHCP Server DHCP (Dynamic Host Control Protocol) is to assign an IP address to the computers on the LAN/private network .
W ir eless-N Broadband Router DHCP Server List The S tatic IP assignment is to add a specifically static IP address to the assigned MAC address. Y ou can view the related information in the DHCP server list. IP Address: Enter one IP address for the computer on the LAN network.
W ir eless-N Broadband Router Chapter 8: V irtual Server Single Port Forwarding The W307R can be configured as a virtual server on behalf of local services behind the LAN port. The given remote requests will be re-directed to the local servers via the virtual server .
W ir eless-N Broadband Router where you want to set the applications. Protocol: Select the protocol (TCP/UDP/Both) for the application. Well-Kno wn Service Port: Select the well-known services as DNS, FTP from the drop-down menu to add to the configured one above.
W ir eless-N Broadband Router Port Range Forwarding This section deals with the port range forwarding mainly . The Port Range Forwarding allows you to set up a range of public services such as web servers, ftp, e-mail and ot her specialized Internet applications to an assigned IP address on your LAN.
W ir eless-N Broadband Router Port T rigger Settings When internal clients have access to external server in the Internet fo r some application, the clients request to connect with severs, and the server will also ask to connect with client.
W ir eless-N Broadband Router 44 same number if needed. Apply: T o enable or disable the rule. Add: After edit the rule, cli ck the “add” button to add the current entry to port triggering list. Apply: Click “Apply” to acti vate th e current rule.
W ir eless-N Broadband Router ALG Service Settings ALG(Application Layer Gateway ) In the context of computer networking, an ALG or application layer gateway consists of a security component that augments a firewall or NA T employed in a computer network.
W ir eless-N Broadband Router 46 server applications, even though a firewall-configuration may allow only a limited number of known ports. In the absence of an ALG , either the ports would get blocked.
W ir eless-N Broadband Router DMZ Settings The DMZ function is to allow one computer in LAN to be exposed to the Internet for a special-purpose service as Internet gaming or videoconferencing. DMZ Host IP Address: The IP address of the computer you want to expose.
W ir eless-N Broadband Router Chapter 9: T raf fic Control T raffic Control T raffic control is used to limit communication speed in the LAN and W AN. Up to 20 entries can be supported with the capability for at most 254 PCs' speed control, including for IP address range configuration.
W ir eless-N Broadband Router 49 traffic heading way for the selected IP addresses: uploading or downloading. Bandwid th: T o specify the uploading/downloading Min. /Max. T raffic speed (KB/s), which can not exceed the W AN speed. Apply: T o enable the current editing rule.
W ir eless-N Broadband Router Chapter 10: Security Settings Client Filter Settings T o benefit your furt her management to the computers in the LAN, y ou can control some ports access to Internet by dat a p acket filter function. Client Filter: Check to enable c lient filter .
W ir eless-N Broadband Router URL Filter Settings In order to control the co mputer to have access to websites. Y ou can use URL filtering to allow the computer to have access to certain websites at fixed time and forbids it having access to certain websites at fixed time.
W ir eless-N Broadband Router MAC Address Settings In order to manage the computers in LAN better , you could control the computer ’s access to Internet by MAC Address Filter . MAC Address Filter: Check to enable MAC address filter . Access Policy: Select one number from the drop-down menu.
W ir eless-N Broadband Router Prevent Network Attack This section is to protect the internal network from exotic attack such as SYN Flooding att ack, Smurf attack, LA ND attack, et c. Once detecting the unknown attack, the Rout er will restrict its bandwidth automatically .
W ir eless-N Broadband Router Local W eb Management Local web management , the alternative to remote web management, is to allow the network administrator to manage t he Router in LAN. Any PC in the LAN can access the Web management utility by default.
W ir eless-N Broadband Router Chapter 1 1: Routing Settings Routing T able The main duty for router is to look for a best path for every data frame, and transfer this dat a frame to destination. So, it’ s e ssential for the router to choose the best path, i.
W ir eless-N Broadband Router Chapter 12: System T ools Ti m e This section is to select the time zone for your location. If you turn off t he Router , the settings for time disappear . However , the Router will automatically obtain the GMT time again once it has access to the Internet.
W ir eless-N Broadband Router drop-down menu and press “Sign up” for registration. User Name: Enter the user name the same as the registration name.
W ir eless-N Broadband Router Firmware Upgrade The Router provides the firmware upgrade by clicking the “Upgrade” af ter browsing for the firmware upgrade packet which you can download from www .tenda.cn . After the upgrade is completed, the Router will reboot automatically .
W ir eless-N Broadband Router Restore to Factory Default Settings This button is to reset all configurations to the default values. It means the Router will lose all the settings you have set. So please Note down the related settings if necessary . Restore to Factory Default Settings: Click this button to restore to default settings.
W ir eless-N Broadband Router Reboot Rebooting the Router makes the settings configured go into effect or to set the Router again if setting failure happens. Reboot the router: Click this button to reboot the device. Change Password 60 This section is to set a new user name and password to better secure your router and network.
W ir eless-N Broadband Router System Log The section is to view the system log. Click the “Refresh” to update the log. Click “Clear” to clear all shown information. If the log is over 150 records, it will clear them automatically . Refresh: Click this button to update the log.
◆ Integrates router , wireless access point, fou r-port switch and firewall in one Complies with IEEE802.1 1n, IEEE 802.1 1b and IEEE802.1 1g standards ◆ MIMO technol ◆ ogy utilizes reflection signal to increase eight times transmission distance of original 802.
An important point after buying a device Tenda W307R (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Tenda W307R yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Tenda W307R - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Tenda W307R you will learn all the available features of the product, as well as information on its operation. The information that you get Tenda W307R will certainly help you make a decision on the purchase.
If you already are a holder of Tenda W307R, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Tenda W307R.
However, one of the most important roles played by the user manual is to help in solving problems with Tenda W307R. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Tenda W307R along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
