Instruction/ maintenance manual of the product Argent Telstra
Go to page of 28
Argent Terminal Adaptor - User Guide Version 1.1 Telstra Corporation Limited Page 1/29 ACN 051 775 556 Version 1.3.
Argent Terminal Adaptor - User Guide Version 1.1 Telstra Corporation Limited Page 2/29 ACN 051 775 556 The information contained in this document was correct at the time of printing. However, in order to improve its products, Telstra reserves the right to modify the details in this document at any time and without warning.
Argent Terminal Adaptor - User Guide Version 1.1 Telstra Corporation Limited Page 3/29 ACN 051 775 556 Table of Contents 1 INTRODUCTION 5 2 SCOPE 5 3 DESCRIPTION 5 3.1 Application 5 3.2 Definitions 6 3.3 Package Contents 6 3.4 Back Panel 7 3.5 Top Panel Seven Segment Display 8 3.
Argent Terminal Adaptor - User Guide Version 1.1 Telstra Corporation Limited Page 4/29 ACN 051 775 556 4 V.24 SERIAL PORT ‘AT’ COMMANDS 21 4.1 Introduction 21 4.2 ‘AT’ Commands 21 4.3 S register settings 22 5 POTS TELEPHONE SUPPLEMENTARY FEATURES 23 5.
Argent Terminal Adaptor - User Guide Version 1.1 Telstra Corporation Limited Page 5/29 ACN 051 775 556 1 INTRODUCTION This document is provided as a guide describing the procedures for installation, usage and maintenance of Telstra’s Argent Terminal Adaptor (ATA).
Argent Terminal Adaptor - User Guide Version 1.1 Telstra Corporation Limited Page 6/29 ACN 051 775 556 3.2 Definitions The following words, acronyms and abbreviations are referred to in this document.
Argent Terminal Adaptor - User Guide Version 1.1 Telstra Corporation Limited Page 7/29 ACN 051 775 556 3.4 Back Panel The ATA contains one analogue EFTPOS port (611 data phone socket), one V.24 (Serial/RS232) data port (DB25 connector), one standard analogue telephone port (RJ45 connector) and one ISDN port (RJ45 keyed connector).
Argent Terminal Adaptor - User Guide Version 1.1 Telstra Corporation Limited Page 8/29 ACN 051 775 556 3.5 Top Panel Seven Segment Display The Seven-Segment display consists of lighted segments to display numbers 0-9 plus a dot. This shows the startup state of the ATA and on-going status of the EFTPOS connection.
Argent Terminal Adaptor - User Guide Version 1.1 Telstra Corporation Limited Page 9/29 ACN 051 775 556 Only the decimal point on the Seven Segment Display is illuminated when the configuration has been downloaded successfully by the Argent NMS, and the ATA is functioning correctly with connected EFTPOS terminals responding normally.
Argent Terminal Adaptor - User Guide Version 1.1 Telstra Corporation Limited Page 10/29 ACN 051 775 556 3.6.4 Power-up the ATA Insert the Plugpack connector into the 12VDC socket on the ATA back panel. Whilst pressing and holding the RST button at the back of the ATA, turn the 240V power on at the power point.
Argent Terminal Adaptor - User Guide Version 1.1 Telstra Corporation Limited Page 11/29 ACN 051 775 556 Next, the ATA makes a new D-Channel X.25 call to the main Argent NMS, to automatically download its configuration. “Remote Management in Progress” (Display 4) will be displayed during this process.
Argent Terminal Adaptor - User Guide Version 1.1 Telstra Corporation Limited Page 12/29 ACN 051 775 556 3.6.12 Observe that the ATA is ready and record the service details When the above steps have completed successfully, and the configuration is downloaded.
Argent Terminal Adaptor - User Guide Version 1.1 Telstra Corporation Limited Page 13/29 ACN 051 775 556 3.6.14 Point-to-Point Protocol (PPP) Installation PPP is used to connect to Internet or other ISDN TAs using the common Windows, Unix, Macintosh interfaces.
Argent Terminal Adaptor - User Guide Version 1.1 Telstra Corporation Limited Page 14/29 ACN 051 775 556 5. Click on Add 6. Tick Don’t detect my modem; I will select from list 7. Click on Next 8. Select Standard Modem Types – Standard 33600 bps Modem 9.
Argent Terminal Adaptor - User Guide Version 1.1 Telstra Corporation Limited Page 15/29 ACN 051 775 556 11. Click on Finish 12. Click on Properties 13.
Argent Terminal Adaptor - User Guide Version 1.1 Telstra Corporation Limited Page 16/29 ACN 051 775 556 3.6.16 Configuring Dial-Up Networking (DUN) 1. Open My Computer from your Desktop 2. Open Dial-Up Networking 3. Double click on Make New Connection 4.
Argent Terminal Adaptor - User Guide Version 1.1 Telstra Corporation Limited Page 17/29 ACN 051 775 556 8. Click Next 10. Click Finish 3.6.17 V.120 Setup V.120 allows a device using a serial port to connect to another remote device using a serial port.
Argent Terminal Adaptor - User Guide Version 1.1 Telstra Corporation Limited Page 18/29 ACN 051 775 556 3.7 ATA Maintenance In the case where the Argent TA fails to operate, contact your Service Provider for assistance. 3.7.1 Check the Seven Segment display Check the ATA Seven Segment Display for indication of possible fault conditions.
Argent Terminal Adaptor - User Guide Version 1.1 Telstra Corporation Limited Page 19/29 ACN 051 775 556 3.7.7 Maintenance by Telstra Telstra Service Assurance contracts are available for the ATA which can cover labour and parts for maintenance activity during contracted hours (please note that some exclusions do apply eg unfair wear & tear).
Argent Terminal Adaptor - User Guide Version 1.1 Telstra Corporation Limited Page 20/29 ACN 051 775 556 3.8.4 ATA out of Warranty - with Telstra Service Assurance If an ATA, which is out of warranty, .
Argent Terminal Adaptor - User Guide Version 1.1 Telstra Corporation Limited Page 21/29 ACN 051 775 556 4 V.24 SERIAL PORT ‘AT’ COMMANDS 4.1 Introduction The Argent Terminal Adaptor (ATA) is an ISDN device with powerful features for interconnection.
Argent Terminal Adaptor - User Guide Version 1.1 Telstra Corporation Limited Page 22/29 ACN 051 775 556 AT Description ATQ0 (default) Enable result codes output to the terminal. ATQ1 Disables result codes to the terminal. ATQ2 Disable result code in answer mode only.
Argent Terminal Adaptor - User Guide Version 1.1 Telstra Corporation Limited Page 23/29 ACN 051 775 556 Register Description allows multiple phone numbers on an ISDN service. S59 ISDN connection status can only be read ATS59? Returns 0 for connection not synchronised to Telstra network ATS59? Returns 1 for connection ready for calls.
Argent Terminal Adaptor - User Guide Version 1.1 Telstra Corporation Limited Page 24/29 ACN 051 775 556 5.1.1 Abbreviations used in the POTS feature descriptions [.
Argent Terminal Adaptor - User Guide Version 1.1 Telstra Corporation Limited Page 25/29 ACN 051 775 556 5.2 Telephone Port (POTS) Features 5.2.1 Call Waiting (CW) Call Waiting is an Easycall ™ feature so the customer can detect the presence of another call, while a call is in progress.
Argent Terminal Adaptor - User Guide Version 1.1 Telstra Corporation Limited Page 26/29 ACN 051 775 556 If you do not have access to a computer, you can enable CLIR on a permanent basis using the foll.
Argent Terminal Adaptor - User Guide Version 1.1 Telstra Corporation Limited Page 27/29 ACN 051 775 556 5.2.5 Call Forward Call forward allows calls to be forwarded to any other telephone including mobiles either immediately, when busy or if the call is not answered.
Argent Terminal Adaptor - User Guide Version 1.1 Telstra Corporation Limited Page 28/29 ACN 051 775 556 All voice phone calls and data calls will be answered if a telephone number is not entered into the AT command registers.
An important point after buying a device Telstra Argent (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Telstra Argent yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Telstra Argent - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Telstra Argent you will learn all the available features of the product, as well as information on its operation. The information that you get Telstra Argent will certainly help you make a decision on the purchase.
If you already are a holder of Telstra Argent, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Telstra Argent.
However, one of the most important roles played by the user manual is to help in solving problems with Telstra Argent. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Telstra Argent along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
