Instruction/ maintenance manual of the product 821 Taylor
Go to page of 95
Model 811, 813, 819, 821 Series Auto Lift Gas Grills Original Operating Instructions 073625-M 9/15/ 10 (Ori ginal P ubli cati on) (Updat ed 4/19/ 13).
Com plete this pa ge for quick r efer ence w hen ser vice is r equi red: Taylor Distributor: Address: Phone: Serv ice: Par ts: Date of Installation: Infor mati on found on data plate : Model Number: S.
Tab le of Co nt ents Mo del 811, 813, 819, 821 Series T able of Contents Section 1 To the Installer 1 ............................................ Installer Safety 1 ........................................................ Site P reparation 1 ........
Mo del 811, 813, 819, 821 Series Tab le of Co nt ents Table of Contents - P age 2 Section 6 Operating Pr ocedu res 17 ..................................... Daily Openi ng Procedures 17 .............................................. Loading Store Menu Items To U SB 23 .
1 Mo del 811, 813, 819, 821 Series To t he In stal ler Section 1 To the Installer The f ollowing are general ins tallat ion inst ruct ions. For complet e installat ion det ails, pleas e see t he checko ut card. Installer Safety In all areas of the world, equipment should be installed i n accordanc e with exis ting loc al codes.
2 Mo del 811, 813, 819, 821 Series To the Insta ller 130304 CAUTI ON: T HIS EQ UIPM ENT MUST BE PROP ERL Y GRO UNDED! FAI L URE TO DO SO CAN RESU LT IN SEVERE PERSONAL INJURY FROM ELECTRICAL SHOCK! Th.
3 Mo del 811, 813, 819, 821 Series To t he Op erato r 120525 Section 2 To the Operator The T aylor gr ills included in t his manual c onsist of the bas e model numbers 811, 813, 819, and 821. Pref ix let ters were added t o the base m odel numbers to denot e minor des ign diff erences : C = S tandard P laten Lengt h (17.
4 Mo del 811, 813, 819, 821 Series Safety 130304 Se cti on 3 Sa fety We, at T aylor Company, ar e concerned about the safet y of the oper ator when he or she com es in contac t wit h the gr ill and its parts .
5 Mo del 811, 813, 819, 821 Series Safet y IMPOR TAN T: DO NOT use a wat er je t or spray excessi ve wat er on or an yw here n ear th e grill. Failure t o follow t his inst ruct ion may r esult in serious electr ical shoc k and cause per manent electr ical and mec hanical damage t o inter nal part s.
6 Mo del 811, 813, 819, 821 Series Safety 130304 Acc ess t o the ser vice ar ea of t he unit is rest rict ed t o persons hav ing knowledge and prac tical experienc e with t he appliance, in par tic ular as f ar as saf ety and hy giene are conc erned. S DO NOT obst ruc t t he vent ilation openings at the r ear of t his appliance.
7 Mo del 811, 813, 819, 821 Series Op erato r Parts Iden ti ficat io n 121003 Section 4 Operator Parts Identif ication C811 E xploded Vi ew Figur e 1 ITE M DESCRIPTI ON PART NO. 1 CAN A.- GREASE X80925 2 SLIDE- GREASE CAN LEFT 069936 3 PANEL-SI DE-UPPER * LEFT 073990 4 SCREW-10- 32X3/8 SLTD TRUS 024298 5 PANEL-SI DE-LOWER * LEFT 073992 *6 KIT A.
8 Mo del 811, 813, 819, 821 Series Op erato r Parts I den ti fi catio n 120907 L811 Expl oded View Figur e 2 ITE M DESCRIPTI ON PART NO. 1 CAN A.- GREASE X80925 2 SLIDE- GREASE CAN LEFT 069936 3 PANEL-SI DE-UPPER * LEFT 073990 4 SCREW-10- 32X3/8 SLTD TRUS 024298 5 PANEL-SI DE-LOWER * LEFT 073992 *6 KIT A.
9 Mo del 811, 813, 819, 821 Series Op erato r Parts Iden ti ficat io n 121003 C813 E xploded Vi ew Figur e 3 ITE M DESCRIPTI ON PART NO. 1 CAN A.- GREASE X80925 2 SLIDE- GREASE CAN LEFT 069936 3 PANEL-SI DE-UPPER * LEFT 073990 4 SCREW-10- 32X3/8 SLTD TRUS 024298 5 PANEL-SI DE-LOWER- LEFT 073992 *6 KIT A.
10 Mo del 811, 813, 819, 821 Series Op erato r Parts I den ti fi catio n 120907 L813 Expl oded View Figur e 4 ITE M DESCRIPTI ON PART NO. 1 CAN A.- GREASE X80925 2 SLIDE- GREASE CAN LEFT 069936 3 PANEL-SI DE-UPPER * LEFT 073990 4 SCREW-10- 32X3/8 SLTD TRUS 024298 5 PANEL-SI DE-LOWER- LEFT 073992 *6 KIT A.
11 Mo del 811, 813, 819, 821 Series Op erato r Parts Iden ti ficat io n 121 106 C819 E xploded Vi ew Figur e 5 ITE M DESCRIPTI ON PART NO. 1 CAN A.- GREASE X80925 2 SLIDE- GREASE CAN LEFT 069936 3 PANEL-SI DE UPPER-LEFT 073990 4 SCREW-10- 32X3/8 SLTD TRUS 024298 5 PANEL-SI DE-LOWER- LEFT 073992 6 SLIDE- GREASE CAN RIGHT 069935 7 PANEL A.
12 Mo del 811, 813, 819, 821 Series Op erato r Parts I den ti fi catio n 130316 L819 Expl oded View Figur e 6 ITE M DESCRIPTI ON PART NO. 1 CAN A.- GREASE X80925 2 SLIDE- GREASE CAN LEFT 069936 3 PANEL-SI DE UPPER-LEFT 073990 4 SCREW-10- 32X3/8 SLTD TRUS 024298 5 PANEL-SI DE-LOWER- LEFT 073992 6 SLIDE- GREASE CAN RIGHT 069935 7 PANEL A.
13 Mo del 811, 813, 819, 821 Series Op erato r Parts Iden ti ficat io n 121 106 C821 E xploded Vi ew Figur e 7 ITE M DESCRIPTI ON PART NO. 1 CAN A.- GREASE X80925 2 SLIDE- GREASE CAN LEFT 069936 3 PANEL-SI DE UPPER-LEFT 073990 4 SCREW-10- 32X3/8 SLTD TRUS 024298 5 PANEL-SI DE-LOWER- LEFT 073992 6 PANEL A.
14 Mo del 811, 813, 819, 821 Series Op erato r Parts I den ti fi catio n 130318 L821 Expl oded View Figur e 8 ITE M DESCRIPTI ON PART NO. 1 CAN A.- GREASE X80925 2 SLIDE- GREASE CAN LEFT 069936 3 PANEL-SI DE UPPER-LEFT 073990 4 SCREW-10- 32X3/8 SLTD TRUS 024298 5 PANEL-SI DE-LOWER- LEFT 073992 6 PANEL A.
15 Mo del 811, 813, 819, 821 Series Op erato r Parts Iden ti ficat io n 120720 Accessor ies Figur e 9 ITE M DESCRIPTI ON PART NO. 1 SHEET-RELEASE - BOX OF 9 (C811, C813, C819, C821) 073442 *2 RETAINER.
16 Mo del 811, 813, 819, 821 Series Impor tant : To the Opera tor 120604 Section 5 Important: To the Operator Note : The Model 81 1 thr ee pla ten grill has be en se lec te d for illustr ation purpo ses.
17 Model 811 , 813, 819, 821 Series Operating Proced ures 130206 Section 6 Operating Procedures The three p laten Model L8 11 has been sel ected to illustrate the step-by-s tep procedures. For grills equipped with less than three platens, perform the following steps as appropriate for your grill platen configuration.
18 Model 811, 813, 8 19, 821 Series Operating Pr ocedures 130205 Step 4 Place the release she et clips over the release sheet. Press them into pla ce over the release sheet bar at the top of the platen. Figure 14 Step 5 Check the tightness of the r elease sheet against the upper pla ten.
19 Model 811 , 813, 819, 821 Series Operating Proced ures 1 10602 Care of Release Sheets DO NOT: S DO NOT fold or crea se. Figure 17 S DO NOT touch with sharp objects, grill scrapers, or abrasive pads. S DO NOT place under other equi pment or objects.
20 Model 811, 813, 8 19, 821 Series Operating Pr ocedures The control will di splay the word “INITIALIZATION” for five seconds an d then will enter the O FF mode, displaying the message “OFF”. The te mperature indicators will not be illu minated.
21 Model 811 , 813, 819, 821 Series Operating Proced ures Progr amming Menu Items To enter the Program Mode, the grill control mus t be in the OFF o r IDLE mode. Step 1 Press and hold the PROGRAM ke y for approximately fi ve seconds to enter the Program Mode.
22 Model 811, 813, 8 19, 821 Series Operating Pr ocedures MENU EDIT Key The MENU EDIT key is used to program a menu item. When the MENU EDIT key is pre ssed, the following screen will display. Figure 28 If there is more t han one screen of menu item s, press the Previous or Next arrow keys to access the other menu items.
23 Model 811 , 813, 819, 821 Series Operating Proced ures 1 10603 MULTIPLE TIMING FUNCTIONS: There is one timing function for clam items and a maximum of 3 timing functions for e ach flat menu item. Each function has a set of parameters associated with it.
24 Model 811, 813, 8 19, 821 Series Operating Pr ocedures 1 10603 Step 5 Press the M ENU EDIT key. Figure 34 Step 6 Press the STORE MENU TO U SB key. Figure 35 Step 7 Enter a file name (up to 8 characters) to save the menu items, using the keyboa rd displayed on the control.
25 Model 811 , 813, 819, 821 Series Operating Proced ures 130312 Patty Placement & Removal Placement pro cedures of meat pr oducts must be followed on the grill. The m eat must be placed on the lower grill surface fr om front to back. When the cook cycle is comple te, the upper platen will raise.
26 Model 811, 813, 8 19, 821 Series Operating Pr ocedures 130312 Patty Placement & Removal (continued) C Series Grills (Shorter Platen Ver sion).
27 Model 811 , 813, 819, 821 Series Operating Proced ures Operating Procedures Cooking Produc t Step 1 S e l e c tt h em e n ui t e mt ob ec o o k e d .T h eg r i l li sa tt h e correct temperature if the control doe s not display any temperatu re statements and the grill temperature indicators are green.
28 Model 811, 813, 8 19, 821 Series Operating Pr ocedures Standby Proc edures Whenever the grill i s idle and product is not being c o o k e d ,t h eu p p e rp l a t e nm u s tb ep l a c e di nt h e STANDBY position. Step 1 To place the upper platen i n the STANDBY position, press the STANDBY button twice from the o pen position.
29 Model 811 , 813, 819, 821 Series Operating Proced ures 120127 Step 2 Use the wiper squeege e to clean the release sheet on the upper platen. Hold the handle at a slight upward angl e.
30 Model 811, 813, 8 19, 821 Series Operating Pr ocedures 130205 Step 2 Press the CLEAN ke y. When the cook surf aces reach the pr oper temper ature for clean ing, an alarm will sound and the message “READY TO CLEAN” will be displayed. Figure 45 Step 3 Press the RAISE b utton to cancel th e alarm.
31 Model 811 , 813, 819, 821 Series Operating Proced ures 120524 Step 6 Remove the release sheet clip, release sheet retainer, and th e release shee t. Take these parts to t h es i n kt ob ew a s h e da n dr i n s e d . Figure 49 Step 7 Repeat steps 1 th rough 6 for the remaining up per platen(s).
32 Model 811, 813, 8 19, 821 Series Operating Pr ocedures 130201 Step 13 Using an approved high tempe rature grill cleaner, pour approxi mately 3 oz. (90 ml) onto each 12” (305 mm) co ok zone. Figure 54 Step 14 Firmly attac h the non-abrasive pa d to the grill cleaning pad holde r.
33 Model 811 , 813, 819, 821 Series Operating Proced ures 1 10610 Step 19 Apply grill cleaner to the back side of the upper platens. Figure 58 Step 20 Apply grill cle aner to the outer edges of the right and left platens. Step 21 Press the STANDBY button twice to lower one of the platens.
34 Model 811, 813, 8 19, 821 Series Operating Pr ocedures 130201 Step 32 With a clean, sanitizer-soaked grill cloth, rinse the bottom of the platen handles, a nd the front, sides, and back of the pl aten surfaces . Figure 61 Step 33 With a clean, sanitizer-soaked grill cloth, rinse the platen cook surfaces.
35 Model 811 , 813, 819, 821 Series Operating Proced ures IMPORTANT! DO NOT use a jet of water to clea n or rinse the grill. DO NOT use cold water or ice to cool the upper plate n or the lower cook sur face.
36 Model 811, 813, 8 19, 821 Series Operating Pr ocedures 130107 Step 42 Place the release she ets flat on the lower grill surface. Gently clean b oth sides of the sheets with an approved hi gh temperature grill cleaner an d the grill cleaning pad and h older.
37 Model 811 , 813, 819, 821 Series Operating Proced ures 120830 Non-24 Hour Stores Only: Step 50 Apply a light coat of vegeta ble oil to the entire lower grill surface. Figure 70 Step 51 Leave the upper platens in the OPEN position overnight. Step 52 Place the power switch in the OFF position.
38 Model 811, 813, 8 19, 821 Series Troubleshooting Guide 120521 Section 7 Troubleshooting Guide PROBLEM PROBABLE CAUSE REMEDY 1. One side of the grill will not heat. The control will display the message, “PROBE FAULT”. a. One power conn ection is not connected.
39 Model 811, 813, 819 , 821 Series Troubleshooting Guide 120521 PROBLEM PROBABLE CAUSE REMEDY 6. The upper plate n will not stay in the COOK or STANDBY position. a. Temper ature is ins ufficient to satisfy the indicator LED's. a. Wait until the indicato r LED's turn green.
40 Model 811, 813, 8 19, 821 Series Troubleshooting Guide 130201 PROBLEM PROBABLE CAUSE REMEDY 11. The platen will n ot lower to preset gap height. a. Excessive carbon build-up on the shields. a. Follow closing proce dures to properly clean and remove carbon build-up from the shields.
41 Model 811, 813, 819 , 821 Series Troubleshooting Guide 130201 PROBLEM PROBABLE CAUSE REMEDY 13. The product is not cooking evenly. a. The upper pla ten or lower grill surface is not clean and/or has carbon build-up. a. Follow closing proce dures to properly clean th e upper platen and the lower grill surface and to remove carbon build-up.
42 Model 811, 813, 8 19, 821 Series Troubleshooting Guide GAS ZONES ONLY PROBLEM PROBABLE CAUSE REMEDY 1. The display read s “BLOWER FAILURE”. a. The blower is faulty. a. Call a service technician. b. The pressure switch is faulty. b. Call a service technician.
43 Model 811 , 813, 819, 821 Series Warranty Expla nation 121003 Section 8 Warranty Explanation Class 103 Parts The warranty for new equipme nt Class 103 parts is one year from th e original date of unit installa tion, with a repla cement part s warranty o f three mo nths.
Section 9 Parts List 44 Parts Li st Mo del 811, 813, 819, 821 Series 130416 DESCRI PT IO N PART NUMBER C811 QTY. L811 QTY. WARR. CLASS RE MARKS C81123N000 & L81123NW00 NATURAL GAS - 3 PLATEN GRILLS ACTUATOR -HOME SWITCH 079792 3 3 103 ADAPTOR-H I TEMP 1/4X1/4 OD 058769-2 1 1 103 ADAPTOR 076745 3 3 103 BACKSPLASH A.
45 Mo del 811, 813, 819, 821 Series Parts List DESCRI PT IO N REMARKS WARR. CLASS L811 QTY. C811 QTY. PART NUMBER +BRACKET -BURNER *C 845*-S HO RT 073016 6 6 103 BUS HIN G-F LG .
46 Parts Li st Mo del 811, 813, 819, 821 Series DESCRI PT IO N REMARKS WARR. CLASS L811 QTY. C811 QTY. PART NUMBER +WIRE A .-IG NITO R *C 845* X73147-12 3 3 103 CONTROL- LIM IT W/ SCREWS 078721 3 3 103 PLATEN CO NTR OL- MOTO R *C 811* X 69621-SER 3 3 212 CO VER A.
47 Mo del 811, 813, 819, 821 Series Parts List DESCRI PT IO N REMARKS WARR. CLASS L811 QTY. C811 QTY. PART NUMBER GUARD-FAN 028534-1 1 1 103 GUIDE-PATTY PLACEMENT GEN MKT 073440 1 1 103 HANDLE-PLATEN 073250 3 103 HANDLE-PLATEN 080588-B 3 103 HAR NES S A.
48 Parts Li st Mo del 811, 813, 819, 821 Series DESCRI PT IO N REMARKS WARR. CLASS L811 QTY. C811 QTY. PART NUMBER +CLA MP-HOSE 7 /16-WI RE DICHROMA T 051742 3 3 000 INSULATOR -TEFLON-2 HO LE 079810 9 9 000 INS ULATI ON- SHR OU D* C845* IN 073106 3 3 000 KIT A.
49 Mo del 811, 813, 819, 821 Series Parts List DESCRI PT IO N REMARKS WARR. CLASS L811 QTY. C811 QTY. PART NUMBER FITT ING-CROSS 3/ 8FPT -BLACK 078906 1 1 103 FITT ING-REDUCER-1/ 2FPT-3 /8F PT 077364 1 1 103 PLUG-3/8MPT-BL ACK 078907 1 1 103 VALV E-GAS REDUNDANT 3- 1/2 WC 079329- 02 3 3 103 MANIFOLD A.
50 Parts Li st Mo del 811, 813, 819, 821 Series DESCRI PT IO N REMARKS WARR. CLASS L811 QTY. C811 QTY. PART NUMBER PAN EL-SI DE- LOWE R *C810* LE FT 073992 1 1 103 C811 S/N M1073522 & U P PAN EL A.-B ACK S ERV ICE * C811* X73513 1 103 C811 S/ N M1073521 & PR IO R PANEL A.
51 Mo del 811, 813, 819, 821 Series Parts List DESCRI PT IO N REMARKS WARR. CLASS L811 QTY. C811 QTY. PART NUMBER RO D-A IR SHU TTE R ADJ US T *C845* 073304 3 3 103 SCR EW- SHO ULD ER 4- 40X.3755 SO C 058381 18 18 103 SCR EW- SHO ULD ER 3/8X3- 1/4 052010 12 12 103 SCR EW- SHO ULD ER 10-32X1/ 4X.
52 Parts Li st Mo del 811, 813, 819, 821 Series DESCRI PT IO N REMARKS WARR. CLASS L811 QTY. C811 QTY. PART NUMBER SWITCH-PRESSUR E 074314 3 3 103 UPPER CONTRO L SWITC H- PRE SSU RE 240V,3H P 077879-C 1 1 103 COMPRESSO R A.
53 Mo del 811, 813, 819, 821 Series Parts List DESCRI PT IO N REMARKS WARR. CLASS L811 QTY. C811 QTY. PART NUMBER WIRE A .-IGNI TOR X73147-12 3 3 103 C81123N921 - JIB GAG E A.
54 Parts Li st Mo del 811, 813, 819, 821 Series DESCRI PT IO N REMARKS WARR. CLASS L811 QTY. C811 QTY. PART NUMBER HARNESS-FAN *C 819* 069716 1 1 103 HARNESS-FAN *C 819* 069717 1 1 103 HARNESS-MC BOARD SUPPLY-2 073460 1 1 103 HARNESS-MC TRANS TO BLOCK 081709 1 1 103 HARNESS-SWITCH 073424 1 1 103 KIT A.
55 Mo del 811, 813, 819, 821 Series Parts List 130416 DESCRI PT IO N PART NUMBER C813 QTY. L813 QTY. WARR. CLASS CO MM ENTS C81323N CL2 (P LATE N D OU BLE L EFT) & L81323NW 79 (RO HS CANADA) NATURAL GAS ACTUATOR -HOME SWITCH 079792 2 2 103 ADAPTOR-H I TEMP 1/4X1/4 OD 058769- 2 1 1 103 ADAPTOR 076745 3 3 103 BACKSPLASH A.
56 Parts Li st Mo del 811, 813, 819, 821 Series DESCRI PT IO N COMM ENT S WARR. CLASS L813 QTY. C813 QTY. PART NUMBER BUSHING -SNAP 11/16 ID X 7 /8OD 010548 6 6 103 BUS HIN G-S NAP 1- 3/8ID X 1- 3/4OD 027712 5 5 000 BUSHING-SN AP 3/4ID X 1"OD BLK 053144 3 3 000 BUSHING-SN AP 5/8ID X 3/ 4OD-BLK 017462 1 1 000 BUSHING -SNAP .
57 Mo del 811, 813, 819, 821 Series Parts List DESCRI PT IO N COMM ENT S WARR. CLASS L813 QTY. C813 QTY. PART NUMBER CO NTR OL-H I-LI MIT 450F R ESET 070279 3 3 103 CONTROL- IGNITOR UTC X70301-02S 3 3 103 +WIRE A.-IG NITOR X73147-12 3 3 103 CONTROL- LIM IT W/ SCREWS 078721 2 2 103 CO NTR OL- MOTO R *C 811* X 69621-SER 3 3 212 CO VER A.
58 Parts Li st Mo del 811, 813, 819, 821 Series DESCRI PT IO N COMM ENT S WARR. CLASS L813 QTY. C813 QTY. PART NUMBER GUIDE-PATTY PLACEMENT GEN MKT 073440 1 1 103 HANDLE-PLATEN 073250 2 103 HANDLE-PLATEN, BLK PENTAT 080588-B 3 103 HAR NES S A.-C OMP .
59 Mo del 811, 813, 819, 821 Series Parts List DESCRI PT IO N COMM ENT S WARR. CLASS L813 QTY. C813 QTY. PART NUMBER INSULATOR -TEFLON-2 HO LE 079810 6 6 000 INSULA TION-SHROUD 073106 3 3 000 KIT A.
60 Parts Li st Mo del 811, 813, 819, 821 Series DESCRI PT IO N COMM ENT S WARR. CLASS L813 QTY. C813 QTY. PART NUMBER LABEL-WARN-GRILL-MCD-SVC- 072658-CA N 3 000 LABEL-WARN-GAS GRILL-CANA 078075-CA N 1 000 LENS -MICA 072986 3 3 000 LINE A .-G AS-C ENT ER *C 811* X81005 1 1 103 LINE A .
61 Mo del 811, 813, 819, 821 Series Parts List DESCRI PT IO N COMM ENT S WARR. CLASS L813 QTY. C813 QTY. PART NUMBER O- RIN G-1- 1/16OD X . 103W 052733-118 4 4 000 ORIFIC E A.-IGN ITOR 073826-005 3 3 103 ORIFICE-H EX PLUG GAS-#40 076554-40 3 3 103 ORIFICE-H EX PLUG GAS-#53 076554-53 3 3 103 PAN EL A.
62 Parts Li st Mo del 811, 813, 819, 821 Series DESCRI PT IO N COMM ENT S WARR. CLASS L813 QTY. C813 QTY. PART NUMBER ROD-AIR SHUTT ER ADJUST 073304 3 3 103 SCR EW- SHO ULD ER 4- 40X.3755 SO C 058381 18 18 103 SCR EW- SHO ULD ER 3/8X3- 1/4 052010 8 8 103 SCR EW- SHO ULD ER 10-32X1/ 4X.
63 Mo del 811, 813, 819, 821 Series Parts List DESCRI PT IO N COMM ENT S WARR. CLASS L813 QTY. C813 QTY. PART NUMBER SWITCH-RO CKER-DPST-10AMP IP65 076989- WP 1 1 103 SWIT CH-SCREW TERM INAL 075780 2 .
64 Parts Li st Mo del 811, 813, 819, 821 Series DESCRI PT IO N COMM ENT S WARR. CLASS L813 QTY. C813 QTY. PART NUMBER LABEL-INST-LIGHT*15E* 079567 1 1 000 LABEL-INST-LIGHT*15E*FRENCH 079567-F 1 1 000 .
65 Mo del 811, 813, 819, 821 Series Parts List 130419 DESCRI PT IO N PART NUMBER C819 QTY. L819 QTY. WARR. CLASS RE MARKS C81923NW00 208V 60HZ 3PH & L81923NW00 208V 60HZ 4PH - NATURAL GAS - ROHS COMPLIANT ACTUATOR -HOME SWITCH 079792 2 2 103 ADAPTOR-1/4MPT X 1/4 OD TUB E 052563- 2 2 2 103 ADAPTOR 076745 2 2 103 BACKSPLASH A.
66 Parts Li st Mo del 811, 813, 819, 821 Series DESCRI PT IO N REMARKS WARR. CLASS L819 QTY. C819 QTY. PART NUMBER BUTTON-O PERATOR-R ED 076011 2 2 000 CABLE-PLATEN-FRONT 073252 4 4 103 CABLE-PLATEN-F-REAR 073251 4 4 103 CAN A.
67 Mo del 811, 813, 819, 821 Series Parts List DESCRI PT IO N REMARKS WARR. CLASS L819 QTY. C819 QTY. PART NUMBER CONTROL-GRILL TOUCH PAD------> *SEE - KIT A.
68 Parts Li st Mo del 811, 813, 819, 821 Series DESCRI PT IO N REMARKS WARR. CLASS L819 QTY. C819 QTY. PART NUMBER GASKET-CON TROL *C 842* 072914 2 2 000 GASKET-FLUE *C 819* 073920 1 1 000 GASKET-FRON.
69 Mo del 811, 813, 819, 821 Series Parts List DESCRI PT IO N REMARKS WARR. CLASS L819 QTY. C819 QTY. PART NUMBER RETAINER-SHEET R ELEASE *C842 072845 2 103 SCRAPER-TEFLON WIPER 075887 1 000 SCR EW- 1.
70 Parts Li st Mo del 811, 813, 819, 821 Series DESCRI PT IO N REMARKS WARR. CLASS L819 QTY. C819 QTY. PART NUMBER MOTO R- GE AR W/C O NN *C 810* 080603 1 103 NUT-1/ 4-20 WHI Z FLANGE LOCK 017523 2 000 PULLEY-PLATEN CABLE 072662 2 103 PULLEY-PLATEN-LEFT 073248-L 1 103 PULLEY-PLATEN-RIGHT 073248-R 1 103 SCR EW- 1/4-20X1- 1/4 SER R.
71 Mo del 811, 813, 819, 821 Series Parts List DESCRI PT IO N REMARKS WARR. CLASS L819 QTY. C819 QTY. PART NUMBER O- RIN G-1- 3/16OD X . 103W 052733-120 8 8 103 O- RIN G-1- 1/16OD X . 103W 052733-118 4 4 103 ORIFIC E A.-IGN ITOR 073826-003 2 2 103 ORIFIC E A.
72 Parts Li st Mo del 811, 813, 819, 821 Series DESCRI PT IO N REMARKS WARR. CLASS L819 QTY. C819 QTY. PART NUMBER REGULATOR -PRESSURE 0-120 PSI 072695-2 1 1 103 RELA Y-3P- 50A 208/240 C OIL 051890-27.
73 Mo del 811, 813, 819, 821 Series Parts List DESCRI PT IO N REMARKS WARR. CLASS L819 QTY. C819 QTY. PART NUMBER SPRING-EXTEN SION LATCH *L 080649 8 000 +PIN-SPRING UPPER * C 810* 080646 4 000 STANDOFF -NYLON 6-32 S NP/THREAD 040280-020 8 8 103 SUPPLY-POWER-10W 12VDC 073336 2 2 103 UPPER CONTRO L SWITCH-HO ME POSITION 073764 2 2 103 CO MPRESSOR A.
74 Parts Li st Mo del 811, 813, 819, 821 Series DESCRI PT IO N REMARKS WARR. CLASS L819 QTY. C819 QTY. PART NUMBER +NIPPLE-3/8 M PT CLOSE BLK 076343 1 1 103 VALV E-GAS REDUNDANT 3- 1/2 WC 079329-02 2 2 103 VALVE-PRESSURE RELIEF 70 PSI 072695- 4 1 1 103 AIR CO MPRESSOR VALVE-SOLENOID 3 WAY 12 VDC 072695- 1 2 2 103 VARISTOR A.
75 Mo del 811, 813, 819, 821 Series Parts List DESCRI PT IO N REMARKS WARR. CLASS L819 QTY. C819 QTY. PART NUMBER LABEL-INST-LIGHT*15E*FRENCH 079567-F 1 000 LABEL-NOTICE-CASTERS-CANAD A 076389-CA N 1 .
76 Parts Li st Mo del 811, 813, 819, 821 Series DESCRI PT IO N REMARKS WARR. CLASS L819 QTY. C819 QTY. PART NUMBER LABEL-FUSE REPLACEMENT 4A 079972 1 1 000 LABEL-NOTICE-CASTERS 076389 1 1 000 LABEL-WARN-GAS GRILL 078075 1 1 000 LABEL-WIRING *M15E/22 E*CO 079538- 12 1 1 000 LINE A .
77 Mo del 811, 813, 819, 821 Series Parts List 130416 DESCRI PT IO N PART NUMBER C821 QTY. L821 QTY. WARR. CLASS RE MARKS C82123NW39 & L82123NW79 - NATURAL GAS - 1-PLATEN - ROHS COMPLIANT ACTUATOR -HOME SWITCH 079792 1 1 103 ADAPTOR-1/4MPT X 1/4 OD TUB E 052563- 2 2 2 103 ADAPTOR 076745 2 2 103 BACKSPLASH A.
78 Parts Li st Mo del 811, 813, 819, 821 Series DESCRI PT IO N REMARKS WARR. CLASS L821 QTY. C821 QTY. PART NUMBER BUSHING -SNAP .391 ID X.500 OD 073910 2 2 103 BUTTON-O PERATOR-BLACK 076012 2 2 103 BUTTON-O PERATOR-R ED 076011 2 2 103 CAN A.
79 Mo del 811, 813, 819, 821 Series Parts List DESCRI PT IO N REMARKS WARR. CLASS L821 QTY. C821 QTY. PART NUMBER +SHIE LD-P OWE R COR D *C 820* 073729 1 1 103 CO VER A.
80 Parts Li st Mo del 811, 813, 819, 821 Series DESCRI PT IO N REMARKS WARR. CLASS L821 QTY. C821 QTY. PART NUMBER HAR NES S A.-MO TO R *C 820* 073892 2 2 103 HARNESS-BLOWER 073608 2 2 103 HARNESS-FAN.
81 Mo del 811, 813, 819, 821 Series Parts List DESCRI PT IO N REMARKS WARR. CLASS L821 QTY. C821 QTY. PART NUMBER RETAINER-SHEET R ELEASE * L810 080594 3 103 SCRAPER-TEFLON WIPER 075887 1 000 SCR EW- .
82 Parts Li st Mo del 811, 813, 819, 821 Series DESCRI PT IO N REMARKS WARR. CLASS L821 QTY. C821 QTY. PART NUMBER +NUT-1 /4-2 0 WHIZ FLA NGE LOCK 017523 2 2 103 O- RIN G-1- 3/16OD X . 103W 052733-120 4 4 000 ORIFIC E A.-IGN ITOR 073826-003 2 2 103 LP G AS ORIFIC E A.
83 Mo del 811, 813, 819, 821 Series Parts List DESCRI PT IO N REMARKS WARR. CLASS L821 QTY. C821 QTY. PART NUMBER RO D-A IR SHU TTE R ADJ US T *C845* 073304 2 2 103 SCRAPER-TEFLON WIPER 075887 1 1 000.
84 Parts Li st Mo del 811, 813, 819, 821 Series DESCRI PT IO N REMARKS WARR. CLASS L821 QTY. C821 QTY. PART NUMBER SHROUD A.-PL ATEN X72835 1 103 SHR OU D A.
85 Mo del 811, 813, 819, 821 Series Parts List DESCRI PT IO N REMARKS WARR. CLASS L821 QTY. C821 QTY. PART NUMBER VALVE-CHECK 1/4M P 020959 1 1 103 VALV E-GAS REDUNDANT 3- 1/2 WC 079329-02 2 2 103 ELB.
811 073475-23 8/12.
811 073475-75 3/13.
813 073725-23 9/12.
819 073814-23 7/12.
819 073814-75 3/13.
821 069842-23 7/12.
An important point after buying a device Taylor 821 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Taylor 821 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Taylor 821 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Taylor 821 you will learn all the available features of the product, as well as information on its operation. The information that you get Taylor 821 will certainly help you make a decision on the purchase.
If you already are a holder of Taylor 821, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Taylor 821.
However, one of the most important roles played by the user manual is to help in solving problems with Taylor 821. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Taylor 821 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
