Instruction/ maintenance manual of the product HE4900 Sunbeam
Go to page of 12
Euro Plus 2400W Convection Panel Heater Instruction Booklet HE4900 Please read these instructions carefully and retain for future reference..
.
Contents Sunbeam’s Safety Precautions 1 Safety Precautions for your heater 2 Sunbeam’s T otal Safety System 3 Features of your Euro Plus Convection Panel Heater 4 Wall mounting your heater 6 Attac.
2 If you have any concerns regarding the performance and use of your appliance, please visit www .sunbeam.com.au or contact the Sunbeam Consumer Service Line Ensure the above safety precautions are understood.
3 If you have any concerns regarding the performance and use of your appliance, please visit www .sunbeam.com.au or contact the Sunbeam Consumer Service Line Ensure the above safety precautions are understood. Sunbeam’ s Safety Precautions If you have any concerns regarding the performance and use of your appliance, please visit www .
4 Patented SCHWARZ element The patented heating element is designed to heat faster than conventional elements. Its single metal construction ensures optimum heat transfer from the element into the surrounding air , to warm the room faster .
5 5 Thermostat dial The thermostat dial allows you to set your desired temperature level. Accurate to within 1°C, the electromechanical thermostat monitors the room’ s temperature and continuously adjusts the heat output to maintain your selected comfort level.
6 Before using your Euro Plus heater ensure it is securely mounted on a wall. Wall mounting For maximum efficiency this heater should be positioned so that the heat generated mixes with the maximum volume of air . It can be installed in any room of the home, including the bathroom, in accordance with the instructions below .
7 3. Mark the first top screw location on the wall, at least 630mm from the floor or skirting board. The base of the heater must be at least 200mm from the floor to ensure adequate air flow into the air inlet. Drill the first hole using a suitable drill bit.
1. Install the heater in accordance with the instructions above. 2. Insert the plug into a 230-240V power outlet and turn the power on. 3. Ensure that the air inlet vent on the underside of the heater and the air outlet are clear of obstructions. 4. Move the on/off switch to the on position (I).
9 The safety auto shut off detects any abnormally high temperatures within the heater and shuts it off to prevent overheating. Should the safety auto shut off activate and switch off the heater , it will need to be reset. 1. T o reset the heater , move the on/off switch to the OFF position.
Consumer Hotline Australia 1800 025 059 New Zealand (09) 912 0747 Consumer information: 1800 025 059 or www .sunbeam.com.au is a registered T rademark of Sunbeam Corporation Limited. ACN 000 006 771. © Sunbeam Corporation Limited 2002. is a registered T rademark of Sunbeam Corporation Limited.
An important point after buying a device Sunbeam HE4900 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Sunbeam HE4900 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Sunbeam HE4900 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Sunbeam HE4900 you will learn all the available features of the product, as well as information on its operation. The information that you get Sunbeam HE4900 will certainly help you make a decision on the purchase.
If you already are a holder of Sunbeam HE4900, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Sunbeam HE4900.
However, one of the most important roles played by the user manual is to help in solving problems with Sunbeam HE4900. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Sunbeam HE4900 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
