Instruction/ maintenance manual of the product HE2800 Sunbeam
Go to page of 12
Oscillating Digital Ceramic Heater Instruction Booklet HE2800 Please read these instructions carefully and retain for future reference..
Sunbeam’s Safety Precautions 1 Safety Precautions for your heater 2 Sunbeam’s T otal Safety System 3 Features of your Oscillating Digital Ceramic Heater 4 Using your Oscillating Digital Ceramic He.
1 Sunbeam are very safety conscious when designing and manufacturing consumer products, but it is essential that the product user also exercise care when using an electrical appliance.
2 If you have any concerns regarding the performance and use of your appliance, please visit www .sunbeam.com.au or contact the Sunbeam Consumer Service Line. Ensure the above safety precautions are understood. Sunbeam’ s Safety Precautions • This heater becomes hot during use.
3 Safety auto shut off Y our Sunbeam Oscillating Digital Ceramic Heater is equipped with a safety system that detects any abnormally high temperatures within the heater and automatically shuts it off to prevent overheating. This first stage of the safety system requires the user to manually reset the heater for it to resume operation.
Control panel The compact control panel houses all of the buttons required to operate the various functions of the heater . Mode button Pres the mode button to select the desired operating mode: Low Heat, High Heat or Auto mode. Auto mode Select the AUTO mode to operate the thermostat.
5 LCD screen The LCD screen displays the current settings, including the ambient room temperature, the selected mode or heat setting, and the timer icon if activated. It features a blue backlight for easy adjustment in the dark. Remote control The handy remote allows you to control the heater from wherever you are in the room.
6 1. Place the heater on a flat level surface and ensure that the air intake and air outlet are clear of obstructions. 2. Insert the plug into a 230-240V power outlet and turn the power on. 3. Move the on/off switch at the rear of the unit to the on (I) position.
7 Activating the Oscillation function Press the OSC button on the control panel or remote to activate the oscillation. The heater will continue to oscillate from side to side, distributing warm air around the room, until the OSC button is pressed again.
8 Y our Oscillating Digital Ceramic heater is equipped with a safety system that detects any abnormally high temperatures within the heater and automatically shuts it off to prevent overheating. Should the safety auto shut off activate and switch the heater off, it will need to be reset.
is a registered trademark of Sunbeam Corporation Limited. Made in China. Due to minor changes in design or otherwise, the product you buy may differ from the one shown in this leaflet. Backed by Sunbeam‘s 2 Y ear Replacement Guarantee and National Service Network.
Consumer Hotline Australia 1800 025 059 New Zealand (09) 912 0747 www .sunbeam.com.au.
An important point after buying a device Sunbeam HE2800 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Sunbeam HE2800 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Sunbeam HE2800 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Sunbeam HE2800 you will learn all the available features of the product, as well as information on its operation. The information that you get Sunbeam HE2800 will certainly help you make a decision on the purchase.
If you already are a holder of Sunbeam HE2800, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Sunbeam HE2800.
However, one of the most important roles played by the user manual is to help in solving problems with Sunbeam HE2800. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Sunbeam HE2800 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
