Instruction/ maintenance manual of the product M304 Stanton
Go to page of 11
M M . . 3 3 0 0 4 4 PROFESSIONAL DJ MIXER ST ANTON MAGNETICS, INC information@stantondj.com www .stantondj.com OWNER’S M A N U A L.
PLEASE READ CAREFULL Y BEFORE USE F AILURE TO FOLLOW THE INSTRUCTIONS PRINTED BELOW MA Y VOID W ARRANTY • Follow all security advice printed on your mixer • When removing the unit's AC plug from the power source, grasp and pull the plug, NEVER the cord itself! • Avoid placing your mixer near heat sources, such as power amplifiers.
When Stanton set out to design its new M.304 3- Channel DJ Mixer , compro- mise was not an option. This 10" professional mixer boasts a wide range of intu- itive controls, superb sound, and high-quality components including a genuine Penny & Giles crossfader .
DESCRIPTION OF FUNCTIONS.
1. Microphone 1 input - This combo (1/4”/XLR) connector is used to connect a microphone. The volume is controlled by the MIC 1 knob. 2. Microphone 2 input - This 1/4” connector is used to connect a microphone. The volume is controlled by the MIC 2 knob.
DESCRIPTION OF FUNCTIONS 18. Master output level - Controls the overall output level of the mixer . 19. Output meters - These LEDs let you know if the audio coming out of the mixer is loud enough (or too loud!). If the LEDs reach the red, the mixer is probably clipping, or distorting.
DESCRIPTION OF FUNCTIONS Power : This is the power switch to turn the mixer "ON" or "OFF" AC IN : This is the Input connection for the included power supply . Send and Return : These connectors are used to connect an outboard signal processor (such as the Stanton DFX-1).
Removing a fader : 1. Make sure mixer is powered off and power supply is disconnected from back of mixer . 3. Remove the fader to be cleaned or replaced by unscrewing the 2 outer screws on the fader plate (removing the 2 inner screws will detach the fader from the fader plate).
ing all traces of dirt and contamination. 4. Remove the fader track (G) by slowly withdrawing from the unit. Place fader track on desk or working surface with black contacts facing upwards. If necessary , the track can be washed in warm water , wiped gently then dried thor- oughly using a dry cloth.
Line Inputs: 2 (RCA) x 3 channels, -10 dBV /10 kOhm Phono Inputs 2 (RCA) x 3 channels, -50 dBV / 47 kOhm Mic Inputs 1(1/4")/ 1 XLR -50 dBV /4.7 kOhm Return Inputs 2 (1/4"), -10 dBV / 10 kOhm.
W ARRANTY Stanton Magnetics, Inc. – W arranty Provision – Returns for Repairs or Replacement W arranty Through Stanton’s authorized dealers around the World, Stanton, or one of Stanton’ s authorized distributors outside the U.
An important point after buying a device Stanton M304 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Stanton M304 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Stanton M304 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Stanton M304 you will learn all the available features of the product, as well as information on its operation. The information that you get Stanton M304 will certainly help you make a decision on the purchase.
If you already are a holder of Stanton M304, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Stanton M304.
However, one of the most important roles played by the user manual is to help in solving problems with Stanton M304. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Stanton M304 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
