Instruction/ maintenance manual of the product CVC5715DNV Speco Technologies
Go to page of 41
INSTR UCTION MANU AL Intense-IR Camera CVC5715DNV CVC5715DNVW.
◑ Contents ...................................................... 1 ◑ Precautions ................................................. 2, 3 ◑ Safety Instructions ...................................... 4 ◑ Package Contents ........................
Only use the camera under conditions where temperatures are between -10°C and +50°C. Be especially careful to provide ventilation when operating under high temperatures . T his is one of the most important parts of the camera. Be careful not to leave fingerprints on the lens cover .
CA UTION RISK OF ELECTRIC SHOCK DO NOT OPEN C AU TI O N :T O RE DU C E TH E RI SK OF EL E C TR I C S HO C K DO NO T R EM O VE C O VE R( OR BA C K) . NO U SE R - SE R VI C EA B L E P AR T S I N SI DE . R E F ER S ER VI CI N G T O QU A LI F IE D S E R VI CE PE R SO NN E L.
◑ ◑ There are no user serviceable parts inside ◑ Do not disassemble this camera other than to make initial adjustments ◑ Use a UL approved regulated 24 volt AC or 12 volt DC power supply ◑ r.
Package Contents P l e a s e m a ke s ur e th a t t h e f o ll o w i n g i t e ms a r e i n c l ud e d i n th e Pa c k a g e : 1) CVC5715DNV, CVC5715DNVW • 1 Video T est Connector , P ower Jack • .
.
CAMERA INST ALLA TION Compatibility 1) CVC5715DNV, CVC5715DNVW INTCM.
CAMERA INST ALLA TION 1. CVC5715DNV, CVC5715DNVW CAMER WALL A ASSEMBL Y HEXAGON SOCKET SCREW M4X7, 4EA T APPING SCREW 4X20, 4EA 2AXIS BRACKET ADAPTOR 8.
CV C5 71 5D NV CV C5 71 5D NV W 600TV Lines DC Auto Iris V arifocal Lens (4mm-9mm) T rue Day/Night Capability ICR-IR Cut F ilter Remov able 850nm IR LEDs * 14pcs ■ ■ IR LED's 14EA & Heate.
CAMERA INST ALLA TION 1) CVC5715DNV, CVC5715DNVW 1 0 7.63” 4.64” 7.48” 2.87” 2.71” 2.59” 2.71” dia.
1. T ype A, T ype B, T ype C of OSD button could be used when it needs to OSD control. 2. T ype D is extra Option (wired Remote controller) 11.
● 12.
13.
14.
Menu items can be selected by using the OSD buttons of the camera 1. Press the Set Up button. * T he Set Up menu will be displayed on the monitor . 2. Move and select the required function using the Up and Down button. * Move the arrow indicator Up or Down to select the desired feature by pressing the Up or Down button.
3. Change menu settings using the Left or Right button. * Available v alues or Status are displayed by pressing the Left or Right buttons . Press the button until desired value / status is displayed. 4. After Changing the setting move the arrow indicator to EXIT and press the SET button to EXIT .
3. Press the RETURN to return to the SETUP menu. NO TE * When DC is selected, the brightness can be adjusted. T he brightness control range is 1 ~ 100. Lens BRIGHTNESS RETURN 100 T his function is used to select Automatic or Manual shutter speed control.
EXPOSURE SENS-UP SHUTTER AGC SENS-UP BLC D-WDR RETURN SENS-UP RETURN AUTO MIDDLE AUTO OFF OFF RET x 4 NO TE *Shutter: Select Shutter using the Up or Down button, you can adjust the shutter speed from 1/60, FLK, 1/250~1/100,000. → FLK: Select FLK mode if flick ering occurs; caused by the unmatched frequency of electric light.
* OFF: BLC function does not operate . * BLC: Select LOW/MID/HIGH User can select and define a specific area in scene and view the area clearly . Press the "ENTER" button at the AREA menu, you can change the area lik e a picture 1. Press the "ENTER" button again after area setting, you can change the area like a picture 2.
* HSBLE: HSBLC function is especially effective for reading car number plates at the night time . Y ou can select and define the required observation area for the target object and ignore a strong light area. Press the "ENTER" button at the AREA menu, you can change the position as shown in Picture 1.
* D-WDR: T his camera which is using 3D-DNR DSP provides intelligent light level control to overcome even strong backlight conditions . → OFF: D-WDR function does not operate . When there are simultaneous bright & dark image area WDR mak es them both distinct and can be selected as OUTDOOR and INDOOR.
White Balance T he White Balance function is used to control the “on-screen” colors . 1. Move the arrow indicator to WHITE B AL on the SETUP menu screen using the Up and Down button. 2. Select the desired mode by using the Left or Right button. * T here ar e thr ee user selectable W hite Balance settings available.
Day / Night Picture can be displayed in either colour of black and white . 1. Select D A Y / NIGHT using the Up or Down button on the SETUP menu screen. 2. Select the desired mode using the Left and Right buttons . * COLOR : T he picture is always displayed in color .
AREA SMART IR ON SMART IR OFF SIZE IR SMART GAIN AREA RETURN 10 RET → A UT O: T he mode will automatically switches to COLOR in normal condition and switches to BW mode when ambient illumination is low . Press the SET button to set the switching time or D → N(A GC), N → D(A GC) in A UT O mode .
3DNR is used to reduce the level of background noise in a low luminance environment. 1. Move the arrow indicator to 3DNR by using the Up and Down button. 2. Select whether or not to activ ate 3DNR by using the Left and Right buttons . * ON: Activates 3DNR - Digial noise reduction can be adjusted between 0 ~ 100.
Special When the SETUP menu screen is displayed, select SPECIAL using the Up and Down buttons. Select one of the mode using the Up and Down button. 1. CAM TITLE : When input, the Camera ID is displayed on the monitor . 1-1) Move the arrow indicator to CAMERA ID using the Up or Down button on the SETUP menu screen.
1-3) Press the SETUP button. CAMERA TITLE CAMERA TITLE 012345678 9 AB C DEFG HIJ KL M N OPQ R ST U VWXY Z ▷ → ← ↑ ↓ ( ) - ㅡ _ □ / = & : ~ , . ← → CLR POS E N D 012345678 9 AB C DEFG HIJ KL M N OPQ R ST U VWXY Z ▷ → ← ↑ ↓ ( ) - ㅡ _ □ / = & : ~ , .
NO TE * In cases where the wrong Camera ID has been input........ Move the cursor to CLR and press SETUP button to erase characters from left to right, and repeat the above steps to input the characters again. 1-5) T o select the position where the Camera ID should be displayed on the screen.
③ Select a new position by using the four directional button, Press the SET button to confirm the position. CAM 1 2. D - EFFECT Move the cursor to D-EFFECT and press the SET button to set the other image functions .
2-2) D - ZOOM: Digital zoom av ailabl e, range x1 ~ x32. P AN : The pan range can be controlled between -10 ~ + 100 TIL T : T he tilt range can be controlled between -10 ~ + 100 * V -FLIP : Flip the image vertically on the screen. * R OTA TE : Flip the horizontal image vertically on the screen.
2-3) GAMMA : Desired gamma v alues can be adjusted between 0.05 ~ 1.00. 2-4) NEG . IMAGE : ON : Activates negative image just lik e film OFF : Normal image 2-5) RETURN : Move the arrow indicator to RETURN after complete the setup to return to SPECIAL menu.
4. PRIV ACY Hide an area you want to hide on the screen. 4-1). When the SPECIAL menu screen is displayed, press the Up and Down buttons to set to PRIV A CY . 4-2). Set up the area mode using the 4 direction buttons . AREA SELECT : Y ou can select up to 8 MD area.
③ Move the arrow indicator to WIDTH to mak e desired width of cells to increase or decrease by using the Left / Right button between the level 0 ~ 100. ④ Move the arrow indicator to HEIGHT to mak e desired height of cells to increase or decrease by using the Left / Right button between the level 0 ~ 100.
ADJUST 1. When the SETUP menu screen is displayed, select ADJUST using the Up and Down buttons . SETUP 1.LENS 2.EXPOSURE 3.WHITE BAL 4.DA Y / NIGHT 5.3DNR 6.SPECIAL 7.ADJUST 8.RESET 9.EXIT DC A TW AUTO ON 2. Select the desired mode by using Up or Down button.
RESET Resets the camera settings to the factory defaults . EXIT Press the SET button in the EXIT menu to save the current settings and exit the SETUP menu. SETUP 1.LENS 2.EXPOSURE 3.WHITE BAL 4.DA Y / NIGHT 5.3DNR 6.SPECIAL 7.ADJUST 8.RESET 9.EXIT DC A TW AUTO ON RESET F ACTOR Y RETURN RET SETUP 1.
Trouble Shooting Northing appears on the screen. ☞ Check the power cable, power supply output and video connection between the camera and monitor . ☞ Are the camera lens or the lens glass dirty? Clean the lens / glass with a soft clean cloth.
37.
- MEMO - 38.
- MEMO - 39.
200 New Highway Amityville, NY 1 1701 631-957-8700 1 800 645 5516 www .specotech.com.
An important point after buying a device Speco Technologies CVC5715DNV (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Speco Technologies CVC5715DNV yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Speco Technologies CVC5715DNV - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Speco Technologies CVC5715DNV you will learn all the available features of the product, as well as information on its operation. The information that you get Speco Technologies CVC5715DNV will certainly help you make a decision on the purchase.
If you already are a holder of Speco Technologies CVC5715DNV, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Speco Technologies CVC5715DNV.
However, one of the most important roles played by the user manual is to help in solving problems with Speco Technologies CVC5715DNV. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Speco Technologies CVC5715DNV along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
