Instruction/ maintenance manual of the product CVC5300DPVF/CVC5300DPVFW Speco Technologies
Go to page of 29
INSTR UCTION MANU AL PIR Sensor Camera Speco T echnologies is constantly de veloping pr oduct impr o vements. W e r eserve the right to modify pr oduct design and specifications without notice and without incurring any obligation.
1 Contents ◑ Contents ...................................................... 1 ◑ Precautions ................................................. 2, 3 ◑ Safety Instructions ...................................... 4 ◑ Package Contents .
2 Do not install the camer a in extr eme temperatur e conditions. Do not touch the fr ont lens of the camer a. Never k eep the camera pointed dir ectly at str ong light. Do not expose the camer a to r adioactivity. Do not install the camer a under unstable lighting conditions.
3 CA UTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOC K DO NOT REMOVE COVER(OR BACK). NO USER-SERVICEABLE P ARTS INSIDE. REFER SER VICING TO QUALIFIED SERVICE PERSONNEL. ISO14001 CA UTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOC K DO NOT REMOVE COVER(OR BACK).
4 S af et y Instructions Pr ecautions f or use Please handle this camer a car efully : ◑ This camera should be installed by qualied personnel only ◑ There are no user serviceable parts inside .
5 Package Contents Please make sure that the following items are included in the Package: 1) CVC5300DPVF , CVC5300DPVFW • 1 Video T est Connector , P ower J ack • 2 Wrenches • Set Screw - 3 T ap.
6 CAMERA INST ALLA TION jv uul j{ Gw v~ ly Gj hi sl G XU G~ ol uG |z pu nG XYG }v s{ zG kj GO G G WWG hP G YU G~ ol uG |z pu nG Y[G }v s{ zG hj GO.
7 CAMERA INST ALLA TION Compatibility 1) CVC5300DPVF , CVC5300DPVFW INTWM INTPM JB03TG.
8 CAMERA INST ALLA TION 1. CVC5300DPVF , CVC5300DPVFW BALL DOME BASE BALL DOME BODY T APPING SCREW 4X25, 3EA BALL DOME ASSEMBL Y HEXAGON SOCKET SCREW M6X20, 2EA.
9 SPECIFICATIONS PIR Sensor Weatherproof Dome Camera DC Auto Iris V arifocal Lens(2.8mm-12mm) 1/3” Sony Super HAD ll CCD NTSC, P AL NTSC=811(H) * 508(V) / P AL=795(H) * 596(V) NTSC=768(H) * 494(V) / P AL=752(H) * 582(V) NTSC=15.734KHz(H) & 59.94Hz(V) / P AL=15.
10 CAMERA DIMENSION 1) CVC5300DPVF , CVC5300DPVFW 5.47” dia 4.36” 3.34” 3.70”.
11 Gener al F eatur es ◑ Ultr a High S ensitivit y - T he built-in high sensitivity COLOR CCD produces a clear image even in 0Lux(B/W , IR-LED ON)or lower illumination.
12 OSD Contr ol Button 1. T ype A, T ype B, T ype C of OSD button could be used when it needs to OSD control. 2. T ype D is extra Option (wired Remote controller) ▲ Up button: Moves the cursor upwards. Use this button to select an item or adjust the parameters.
13 ● Menu S etup ● Lens S etting 1. Pr ess the F unction Setup switch. - Main setup menu is displayed on the monitor scr een. 3. THE Lens mode has sub menu items as listed below. - BRIGHTNESS : A djusts the video brightness. Using this function, you can contr ol the scr een brightness.
14 - F OCUS ADJ : T o adjust the DC lens f ocus corr ectly, you must activate the F ocus S ettings mode under each lens menu. A ctivate the F ocus S ettings mode, adjust the lens f ocus, and then deactivate the settings mode. ☞ NO TE ■ If color r olling occur s when using a DC lens, set Shutter to Fixed (---).
15 ◆ A GC(A UT O GAIN CONTROL) : The higher the gain le v el, the brighter the scr een - but the higher the noise. * OFF : Deactivates the A GC function. * L OW : Allows automatic gain contr ol fr om 5.3dB to 32dB. * HIGH : Allows automatic gain contr ol fr om 5.
16 ※ Select one of the f ollowing 5 modes, as appr opriate f or your purpose. ◆ A T W : Select this when the color temperatur e is between 1,700˚K and 11,000˚K. ◆ OUTDOOR : Select this when the color temperatur e is between 1,700˚K and 11,000˚K.
17 ● Backlight S etting Unlik e conv entional camer as, the C VC5300DPVF and C V C5400DPVF ar e designed to deliv er a distinctiv e subject and back gr ound at the same time, e ven when the subject is backlight, by using the f eatur es of the pr oprietar y W-V DSP chip.
18 BLC SETUP HLC SETUP Press Set to Return Press Set to Return LEVEL TOP BOTTOM LEFT RIGHT LEVEL LIMITS MASK COLOR MASK TONE TOP BOTTOM LEFT RIGHT LOW 38 109 54 121 MIDDLE NIGHT ONL Y BLACK 1 5 120 5 .
19 3. Set the DNR3 mode to 'ON' and press the F unction S etup switch. Then you can adjust the noise r eduction le v el. ☞ NO TE ■ Y ou cannot set the DNR3 to ‘ON’ or ‘OFF’ when the A GC mode of the EXPOSURE menu is ‘OFF’.
20 ◆ A UT O : The mode is switched to 'Color' in a normal environment, but switches to 'B/W' mode when ambient illumination is low. T o set up the switching time f or A UT O mode, pr ess the F unction Setup switch. Y ou can turn on or off the burst signal on B/W mode.
21 2. Select a desired mode using the F unction S etup switch. SPECIAL IMAGE SETUP 1.IMAGE ADJ 2.CAM TITLE 3.SYNC 4.MOTION DET 5.PRIV ACY 6.DIS 7.COMM ADJ 8.LANGUAGE 9.RETURN 1.V -REV 2.H-REV 3.D-ZOOM 4.FONT COLOR 5.SHARPNESS 6.MONITOR 7.RETURN OFF INT OFF OFF OFF ENGLISH OFF OFF WHITE ON LCD ◆ IMA GE ADJ.
22 ☞ NO TE ■ W hen the V -REV or H-REV mode is enabled, the te xt on the screen does not ip. ■ If you increase the SHARPNESS lev el too high, the pictur e may become distor ted or noise may appear . ☞ NO TE ■ W hen the CAM TITLE menu is ‘OFF’, no title will be displayed on the monitor screen ev en if you enter one.
23 ☞ NO TE ■ W hen using AC po wer a t 60Hz(NTSC), 50Hz(P AL), frequency , you can use the L/L type synchronization. ■ W hen the pow er is DC 12V , the SYNC menu is xed to the ‘INT’ mode.
24 1) When the SPECIAL menu scr een is displayed, pr ess the F unction Setup switch so that the arrow indicates 'PRIV A C Y'. 2) Set up the mode using the Function Setup switch. - ARE A : Y ou can select up to 12 PRIV A C Y ar eas. - MODE : Determines whether to use the ar ea selected in the AREA.
25 ● T r ouble Shooting PR OBLEM Northing appears on the screen. ☞ Check the power cable, power supply output and video connection between the camera and monitor . ☞ Are the camera lens or the lens glass dirty? Clean the lens / glass with a soft clean cloth.
26.
27 ▶ MEMO.
200 New Highway Amityville, NY 1 1701 631-957-8700 1 800 645 5516 www .specotech.com.
An important point after buying a device Speco Technologies CVC5300DPVF/CVC5300DPVFW (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Speco Technologies CVC5300DPVF/CVC5300DPVFW yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Speco Technologies CVC5300DPVF/CVC5300DPVFW - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Speco Technologies CVC5300DPVF/CVC5300DPVFW you will learn all the available features of the product, as well as information on its operation. The information that you get Speco Technologies CVC5300DPVF/CVC5300DPVFW will certainly help you make a decision on the purchase.
If you already are a holder of Speco Technologies CVC5300DPVF/CVC5300DPVFW, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Speco Technologies CVC5300DPVF/CVC5300DPVFW.
However, one of the most important roles played by the user manual is to help in solving problems with Speco Technologies CVC5300DPVF/CVC5300DPVFW. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Speco Technologies CVC5300DPVF/CVC5300DPVFW along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
