Instruction/ maintenance manual of the product ERS-1.0 SpeakerCraft
Go to page of 11
OWNER’S MANUAL ERS- 1 .0 Web Server Ethernet/RS232 Adapter Revision 1.
KIT INCLUDES: • (1) RSA-1.0 • (1) ERS-1.0 • (1) 6 ft. DB9F to DB9F Null Modem Cable • (1) ERS-1.0 Quick Start Guide EQUIPMENT NEEDED: • (2) 6 ft. Network Patch Cord (Straight Through) • (1) Fully Functional MZC System programmed with MODE keypads using the latest Firmware • (1) Wireless Router • (1) ERS-1.
WIRELESS NETWORKING 101 OVERVIEW: This section is to provide you with the basic knowledge on how networks are set up and operate. Step 1 - CHOOSE YOUR WIRELESS EQUIPMENT The rst step is to make sur e that you have the equipment you need.
• If you curr ently have your computer connected to a router: Unplug the network cable connected to the Internet, W AN, or WLAN port from your current router , and plug this end of the cable into the Inter net, W AN, or WLAN port on your wireless router .
2. The Wireless Network Connection window should appear and you should see your wireless network listed with the network name you chose. If you don’t see your network, click Refresh network list in the upper-left cor ner . Click your network, and then click Connect in the lower-right corner .
RSA-1.0 (Included) MZC-88 5 HOOK UP DIAGRAM Wireless Router iPhone ® CA T 5 Patch Cord - 50 FT . Max 6ft DB9F to DB9F Null Mode Cable (Included) WiFi ERS-1.
SYSTEM SETUP (continued) With all related devices connected, apply power to the wireless router; once the router has fully booted up, then apply power to the MZC, then the ERS-1.0. Boot up time may vary depending on how many zones are congured on the system.
SYSTEM SETUP (continued) Notice the SpeakerCraft icon shows up. Y ou can call the link whatever you like, in this case SpeakerCraft, then pr ess ADD. See Figure 5. Notice that the icon is now on the main page. To access the MZC system, press the icon.
WEB BROWSERS The ERS can be accessed through a web browser on a PC or MAC. Simply type in the IP address for the ERS into the browser (192.168.1.254) as shown below.
9 GUI INTERFACE Here is a layout of the main page and the button relation to the MZC project. Predened buttons: Predened buttons are buttons that cannot be programmed in any way. Programmable Buttons: Any button that has a number reference to it can have command placed under it.
LIT97605(rev4) LIT07110A 940 Columbia A ve., Riverside CA 92507 | USA (800) 448 0976 Fax (951) 787 8747 Inter national +1 951 787 0543 | www. speakercraft.
An important point after buying a device SpeakerCraft ERS-1.0 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought SpeakerCraft ERS-1.0 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data SpeakerCraft ERS-1.0 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, SpeakerCraft ERS-1.0 you will learn all the available features of the product, as well as information on its operation. The information that you get SpeakerCraft ERS-1.0 will certainly help you make a decision on the purchase.
If you already are a holder of SpeakerCraft ERS-1.0, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime SpeakerCraft ERS-1.0.
However, one of the most important roles played by the user manual is to help in solving problems with SpeakerCraft ERS-1.0. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device SpeakerCraft ERS-1.0 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
