Instruction/ maintenance manual of the product M88604C1 Spalding
Go to page of 20
1 08/06 ID# M88604C1 T oll-Free Customer Service Number for U.S: 1-800-334-91 1 1 Sp alding Internet Address: http://www .sp alding.com W rite Model Number From Box Here: W ARNING! READ AND UNDERSTAND OPERATOR'S MANUAL BEFORE USING THIS UNIT. FAILURE TO FOLLOW OPERATING INSTRUCTIONS COULD RESULT IN INJURY OR DAMAGE TO PROPERTY.
2 ID# M88604C1 08/06 Owner must ensure that all players know and follow these rules for safe operation of the system. W ARNING • DO NOT HANG on the rim or any part of the system including backboard, support braces or net.
3 08/06 ID# M88604C1 Item Qty. Part No. Description 1 1 968880 Pole 2 1 908266 Tube, Ground Anchor, Black 3 1 Rim Assembly 4 1 Net 5 4 205702 Nut, Hex, 3/8-16 6 4 203300 Washer, Locking, 3/8 7 4 205700 Bolt, Hex, 3/8-16 x 3.5” Long 8 1 204922 Pin, Hitch 9 1 204923 Pin, Cotter, #8 10 3 204993 Rebar, .
4 ID# M88604C1 08/06 Item #5 (4) HARDW ARE IDENTIFIER (BOL TS & SCREWS) Item #34 (4) Item #24 (9) Item #21 (16) Item #28 (2)* Item #26 (1) Item #25 (4) Item #22 (9)* HARDW ARE IDENTIFIER (NUTS, W .
5 08/06 ID# M88604C1 Ensure ground is level with playing surface, then dig pole hole. CONTACT UTILITIES BEFORE DIGGING. W ARNING! 24" (61 cm) 48" (121.9 cm) PLAYING SURFACE GROUND SURFACE 24" (61 cm) 48" (121.9 cm) 1. Install nut s (25) onto the ground tube bolts as shown.
6 ID# M88604C1 08/06 1" (2.54 cm) SIDE VIEW DRAINAGE HILL PLAYING SURFACE Fill hole with concrete. T amp down concrete to release air pockets and build drainage hill.
7 08/06 ID# M88604C1 IMPORT ANT!: W AIT A MINIMUM OF 72 HOURS BEFORE GOING ON T O NEXT STEP . CONCRETE MUST CURE. ALLOW ADDITIONAL TIME FOR COLD, WET OR HUMID WEA THER. IMPORT ANT! Check leveling of mounting plate several times with carpenter’s level while concrete is curing.
8 ID# M88604C1 08/06 Insert bushings (19) into areas shown. 6. 19 19 19 1 13 19 19 17 18 19 19 19 19 19 19 19 19 19 19 19 19 19 19 19 19.
9 08/06 ID# M88604C1 Rest top of pole on a piece of scrap wood (not included) and line up holes in pole (1) to holes in mounting plate (2) as shown. 7A. 22 23 1 PLA YING SURF ACE 2 Insert bolt (23) through holes in plate and pole and secure with nut (22).
10 ID# M88604C1 08/06 8. 26 24 15 9 8 14 Completed Assembly TWO people are required to lift pole into position so that the threaded assembly rod (14) can be installed and secured by the THIRD person. While pole is being supported by TWO capable adult s, position rod (14) and lock into place with hitch pin (8) and cotter pin (9).
11 08/06 ID# M88604C1 While still in forward position, attach both upper and lower yokes (17 & 18) to pole as shown. 9. 22 21 28 21 17 18 THREE CAPABLE ADULTS REQUIRED FOR THIS PROCEDURE. FAILURE TO FOLLOW THIS WARNING COULD RESULT IN SERIOUS INJURY AND/OR PROPERTY DAMAGE.
12 ID# M88604C1 08/06 22 12 19 21 20 18 21 19 Attach elevator adjustment (12) to lower yoke (18). 10. THREE CAPABLE ADULTS REQUIRED FOR THIS PROCEDURE.
13 08/06 ID# M88604C1 Attach elevator adjustment (12) to pole bracket. 11 . 12 23 21 22 33 33 21 THREE CAPABLE ADULTS REQUIRED FOR THIS PROCEDURE. FAILURE TO FOLLOW THIS WARNING COULD RESULT IN SERIOUS INJURY AND/OR PROPERTY DAMAGE.
14 ID# M88604C1 08/06 Attach backboard (13) to upper and lower yokes (18 & 17). First attach board (13) to upper yoke (17), using TWO people to hold the board and ONE person to attach hardware (FIG . A). Use hardware as shown in FIG . B. 12. A. FIG.
15 08/06 ID# M88604C1 13. 5 7 Refer T o Instructions Included With Rim Hardware For Rim Assembly . 3 Rim Assembly 6 13 7 IMPORT ANT! Carefully cut and peel protective film away from board prior to attaching rim. Before starting rim assembly , tighten nut (26) until it is positioned 6-3/4” from the end of the rod as shown (Figure A).
16 ID# M88604C1 08/06 14. A. 15. Apply height indicator labels (32 & 31) to height indicators (30). 2. 4. 3. 1. Install net (4) to rim as shown. 7 8 9 10 7 8 9 10 7 8 9 10 7 8 9 10 Set-up For Right Side Set-up For Lef t Side 32 31 30 30 B.
17 08/06 ID# M88604C1 PLA YING SURF A CE WAR NING F AILURE T O FOLLO W THESE W ARNINGS MA Y RESUL T IN SERIOUS INJUR Y AND/OR PR OPER TY D AMA GE. Owner m ust ensure that all pla y er s kno w and f ollow these rules f or saf e operation of the system.
18 ID# M88604C1 08/06 17. After pole has been secured to the anchor plate (2) loosen nut (26), remove cotter pin (9), and pull out pin (8). This will allow the removal of the assembly rod (14) which is no longer necessary for the remainder of the assembly and installation of system.
19 08/06 ID# M88604C1 12 19. Apply height adjust ment label (1 1). Adjust system by turning crank until desired height is reached per height indicator (30). 11 30 10 feet (3.05 m) READ AND UNDERSTAND WARNING & HEIGHT ADJUSTMENT LABELS BEFORE USING THIS UNIT.
20 ID# M88604C1 08/06 Subject to proper installation and normal use, S palding ® warrants, subject to limit ations below , to the original retail purchaser all structural components of the S palding ® system to be free of defects in material and workmanship for the duration of ownership by the original retail purchaser .
An important point after buying a device Spalding M88604C1 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Spalding M88604C1 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Spalding M88604C1 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Spalding M88604C1 you will learn all the available features of the product, as well as information on its operation. The information that you get Spalding M88604C1 will certainly help you make a decision on the purchase.
If you already are a holder of Spalding M88604C1, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Spalding M88604C1.
However, one of the most important roles played by the user manual is to help in solving problems with Spalding M88604C1. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Spalding M88604C1 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
