Instruction/ maintenance manual of the product M867SF12 Spalding
Go to page of 17
1 08/06 ID# M867SF12 In-Ground Basketball System Owners Manual Customer Service Center • N53 W24700 South Corporate Circle • Sussex, WI 53089 • U.S.A. T oll-Free Customer Service Number for U.S: 1-800-334-91 1 1 Internet Address: http://www .sp alding.
2 ID# M867SF12 08/06 IMPORT ANT! WRITE MODEL NUMBER FROM BOX ONTO P AGE 1 OF THIS OWNERS MANUAL Owner must ensure that all players know and follow these rules for safe operation of the system. W ARNING • DO NOT HANG on the rim or any part of the system including backboard, support braces or net.
Item Qty. Part No. Description 1 1 858861 Pole 2 1 898850 Plate, Anchor, Black 3 1 Rim Assembly 4 1 Net 5 4 203017 Nut, Hex, 3/8-16 6 4 203300 Washer, Locking, 3/8 7 4 200512 Bolt, Hex, Tap, 3/8-16 x 3.
4 ID# M867SF12 08/06 Item #13 (1) Item #5 (4) Item #9 (1) Item #16 (4) Item #24 (9) Item #21 (24) Item #7 (2) Item #25 (12) Item #22 (13) HARDW ARE IDENTIFIER (OTHER - NOT ACTUAL SIZE) Item #8 (1) HAR.
5 08/06 ID# M867SF12 Ensure ground is level with playing surface, then dig pole hole. Install threaded ends of J-bolt s (19) through holes in mounting plate (2) and secure as shown. 2 25 25 25 19 19 Install nut (25) to J-bolt (19) as shown. Repeat procedure for remaining three J-bolts (19).
6 ID# M867SF12 08/06 Insert J-bolts (19) from mounting plate (2) into cement as shown. Move assembly around to release any air pockets in cement, then rest mounting plate on cement drainage hill. Apply some pressure to level mounting plate on top of drainage hill.
7 08/06 ID# M867SF12 Insert bushings (26 and 27) into areas shown. 27 11 27 27 27 26 26 6. 27 27 27 27 17 26 26 17 27 26 IMPORT ANT! Bushing types are identified with a letter .
8 ID# M867SF12 08/06 Rest top of pole (1) on a piece of scrap wood (not included) and line up holes in pole to holes in mounting plate (2) as shown. 7A. 22 23 1 PLA YING SURF ACE 2 Insert bolt (23) through holes in plate and pole and secure with nut (22).
9 08/06 ID# M867SF12 THREE PEOPLE REQUIRED FOR THIS PROCEDURE. FAILURE TO FOLLOW THIS WARNING COULD RESULT IN SERIOUS INJURY AND/OR PROPERTY DAMAGE. W ARNING! 8. TWO people are required to lift pole into position so that the threaded assembly rod (14) can be installed and secured by the THIRD person.
10 ID# M867SF12 08/06 While still in forward position, attach both yokes (17) to pole as shown. 9. 22 17 17 THREE PEOPLE REQUIRED FOR THIS PROCEDURE. FAILURE TO FOLLOW THIS WARNING COULD RESULT IN SERIOUS INJURY AND/OR PROPERTY DAMAGE. W ARNING! 20 12 12 21 21 3.
11 08/06 ID# M867SF12 Attach backboard (1 1) to upper and lower yokes (17). First attach board (1 1) to upper yoke (17), using TWO people to hold the board and ONE person to attach hardware (FIG . A). Use hardware as shown in FIG . B. 10. A. FIG. A FIG.
12 ID# M867SF12 08/06 11 . 5 8 Refer T o Instructions Included With Rim Hardware For Rim Assembly . Rim Assembly 6 11 7 Before starting, tighten assembly bolt (14) at 6-3/4” from the end of the bolt to the top of the nut (18) (Figure C). Remove rim cover (16), attach rim assembly (3) to backboard (1 1) and reattach rim cover (16).
13 08/06 ID# M867SF12 12. 2. 4. 3. 1. Install net (4) to rim as shown. Apply name plate stickers (15) to lower yoke as shown. 13. 15 15.
14 ID# M867SF12 08/06 7 PLA YING SURF A CE 1 25 24 14. 1 18 Upright pole (1) by tightening nut (18). Using 15/16” wrench, turn nut (18) clockwise to begin standing pole upright. Continue to turn nut (18) until pole has come to rest against washers (24) and pole is vertical.
15 08/06 ID# M867SF12 15. After pole has been secured to plate (2) loosen nut (18), remove cotter pin (8), and pull out pin (13). This will allow the removal of the assembly bolt (14) which is no longer necessary for the remainder of the assembly and installation of system.
16 ID# M867SF12 08/06 17. Regulation height is 10 feet. 10 feet (3.05 m) READ AND UNDERSTAND WARNINGS LABELS BEFORE USING THIS UNIT. FAILURE TO FOLLOW OPERATING INSTRUCTIONS COULD RESULT IN INJURY OR DAMAGE TO PROPERTY. W ARNING! Check system leveling.
17 08/06 ID# M867SF12 Subject to proper installation and normal use, S palding ® warrants, subject to limit ations below , to the original retail purchaser all structural components of the S palding ® system to be free of defects in material and workmanship for the duration of ownership by the original retail purchaser .
An important point after buying a device Spalding M867SF12 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Spalding M867SF12 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Spalding M867SF12 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Spalding M867SF12 you will learn all the available features of the product, as well as information on its operation. The information that you get Spalding M867SF12 will certainly help you make a decision on the purchase.
If you already are a holder of Spalding M867SF12, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Spalding M867SF12.
However, one of the most important roles played by the user manual is to help in solving problems with Spalding M867SF12. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Spalding M867SF12 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
