Instruction/ maintenance manual of the product M7900412 Spalding
Go to page of 14
1 05/06 ID# M7900412 Toll-Free Customer Service Number for U.S: 1-800-558-5234, For Canada: 1-800-284-8339 , For Europe: 00 800 555 85234 (Sweden: 009 555 85234 ), For Australia: 1-800-632 7921 Internet Address: http://www.
2 ID# M7900412 05/06 Owner must ensure that all players know and follow these rules for safe operation of the system. W ARNING • DO NOT HANG on the rim or any part of the system including backboard, support braces or net.
3 05/06 ID# M7900412 P ARTS LIST - See Hardware Identifier HARDW ARE IDENTIFIER (BOL TS) Item Qty . Part No. Description 1 1 Rim 2 2 20260401 Bolt, Carriage 3/8 x 4.75” Long 3 2 203474 W asher , Flat, 1”O.D. 4 2 203017 Hex Nut, 3/8” 5 4 203063 Nylon Nut, 3/8” 6 8 203232 W asher , 3/4” O.
4 ID# M7900412 05/06 HARDW ARE IDENTIFIER (NUTS, W ASHERS & SP ACERS) HARDW ARE IDENTIFIER (Not Actual Size) #31 (1) #27 (1) #18 (1) #13 (1) #14 (1) #15 (1) LO G O #19 (1) #22 (2) #28 (1) Item #30.
5 05/06 ID# M7900412 T OOLS REQUIRED 1/2" 9/16" 3/4" 1/2" 9/16" 3/4" AND/OR This is what your system will look like when you’ve finished this section: ASSEMBLE THE BACKBOARD AND RIM W ARNING! IF YOUR SYSTEM IS EQUIPPED WITH AN ACRYLIC BACKBOARD, EXAMINE BACKBOARD FOR ANY DAMAGE THAT MAY HAVE OCCURRED DURING SHIPMENT.
6 ID# M7900412 05/06 Attach foam p ad (22) to both front and back of backboard so that holes on pad line up with holes on backboard as shown. Attach foam (28) to H-Frame (27) as shown. 22 TWO CAPABLE ADULTS REQUIRED FOR THIS PROCEDURE. FAILURE TO FOLLOW THIS WARNING COULD RESULT IN SERIOUS INJURY AND/OR PROPERTY DAMAGE.
7 05/06 ID# M7900412 Lift backboard upright and insert bolt (20) through board into H-frame (27). Secure using nut (17) as shown. 20 17 20 17 27 28 2. TWO CAPABLE ADULTS REQUIRED FOR THIS PROCEDURE. FAILURE TO FOLLOW THIS WARNING COULD RESULT IN SERIOUS INJURY AND/OR PROPERTY DAMAGE.
8 ID# M7900412 05/06 Place a special locking nut (25) approximately half-way up on each carriage bolt (2) as shown. Keep the two special locking nuts (25) at the same level. NOTE: COMPLETED ASSEMBL Y 2 25 4. RIM ASSEMBL Y & INST ALLA TION 1 3 2 24 4 Install two carriage bolt s (2) through rim (1), washers (3), and lock washers (24) as shown.
9 05/06 ID# M7900412 1 13 25 Then, insert spacer (10) through back bracket (13), nylon washers (23) and rim assembly (1). BOTTOM VIEW 13 10 Spacer flush with bracket BOTTOM VIEW 13 23 23 10 1 Ends of spacer (10) should be flush on both sides of board bracket (13).
10 ID# M7900412 05/06 Install bolt (1 1) through top holes on bracket (13) using washers (6) and nut (5) as shown. T ighten completely . 11 6 6 10 5 23 23 Attach rim assembly to backboard and support structure by inserting bolt s (16) through bottom holes in back bracket (13).
11 05/06 ID# M7900412 Position rim assembly (1) 90 degrees to back bracket (13) as shown. Place inner-bracket (14) over both carriage bolts (2) followed by springs (7), washers (8) and special nut s (26). NOTE: COMPLETED ASSEMBL Y T ighten special nuts (26) until flush with end of carriage bolts (2) as shown.
12 ID# M7900412 05/06 First, test fit spacer (10) into back bracket (13) and Carefully rock in a circular motion to ream out any excess paint from holes if necessary . Insert spacer (10) through bottom holes in board bracket (13) and inner bracket (14).
13 05/06 ID# M7900412 11 6 5 6 Then, install bolt (1 1), washers (6), and nut (5) through spacer (10) and tighten completely . LEVELING AND TENSION ADJUSTING INSTRUCTIONS: Place level on rim (1) and adjust nut (25) until level. T ighten nut (26) to set rim tension for playing.
14 ID# M7900412 05/06 Secure net (18) to rim (1). 1 2 3 4 1 OUTSIDE VIEW Apply logo label (19) to cover plate (15). Install cover plate (15) on rim (1) using self t apping screws (12) as shown (note orientation of cover plate). 12 15 19 15 Cover plate (15) will fit INSIDE back bracket.
An important point after buying a device Spalding M7900412 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Spalding M7900412 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Spalding M7900412 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Spalding M7900412 you will learn all the available features of the product, as well as information on its operation. The information that you get Spalding M7900412 will certainly help you make a decision on the purchase.
If you already are a holder of Spalding M7900412, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Spalding M7900412.
However, one of the most important roles played by the user manual is to help in solving problems with Spalding M7900412. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Spalding M7900412 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
