Instruction/ maintenance manual of the product 82S6XL010D Solid State Logic
Go to page of 18
Multichannel Compressor Owner ’ s Manual.
.
Solid State Logic Super -Analogue™ Outboar d Owner ’s Manual 82S6XL010D S U P E R A N A L O G U E M U L T I C H A N N E L C O M P R E S S O R.
XLogic Multichannel Compressor Owner ’ s Manual As resear ch and development is a continual process, Solid State Logic r eserves the right to change the features and specifications described her ein.
Page 1 Contents 1.0 Introduction 3 2.0 Safety Considerations 4 Safety W arnings 4 3.0 Installation 6 Setting the mains voltage selector 6 Mounting 6 Connections 6 4.
XLogic Multichannel Compressor (rear) XLogic Multichannel Compressor (front) Page 2 XLogic Multichannel Compressor Owner ’ s Manual FADER MAKE-UP 0 RELEASE - S RATIO 2 4 ATTACK - mS .
Page 3 Introduction 1.0 Introduction The XLogic Multichannel Compressor is a 2U rack-mounting six-channel compr essor . It utilises classic SSL Centre Section compr essor design elements within a SuperAnalogue design topology .
Page 4 XLogic Multichannel Compressor Owner ’ s Manual 2.0 Safety considerations This section contains definitions and warnings, and practical information to ensure a safe working envir onment. Please take time to read this section befor e undertaking any installation work.
Page 5 Safety Considerations Mains Supply and Phases Solid State Logic equipment is designed for connection to single phase supplies with the Neutral conductor at earth potential – category TN – and is fitted with a protective fuse in the Live conductor only .
Page 6 XLogic Multichannel Compressor Owner ’ s Manual 3.0 Installation 3.1 V oltage Selection Before connecting the mains supply ensur e that the voltage range selector next to the IEC socket on the rear of the unit is correctly set. The input setting must be confirmed before applying power .
Page 7 4.0 Operation The XLogic Multichannel Compressor unit is a 2U rack-mounting six-channel compr essor designed to provide extremely flexible contr ol over a 5.1 channel mix, or to be used as two separate compressors when working on stereo material.
The ISO switches isolate their r espective channels from the compr essor . When pressed that channel will not contribute to the side chain and will not be affected by the compr essor . It is still controlled by the Master Fader and AutoFade controls. Another example may help: your mix has low level ster eo reverb placed in the surr ound channels.
Page 9 Appendix A – Internal links and fuses Fuses (Mains Inlet) The mains inlet contains a single 1 amp 1.25" time delay fuse (SSL Part No. 35FJJ310). T o change it disconnect the mains inlet, then using a small screwdriver prise open the mains selector cover .
Page 10 XLogic Multichannel Compressor Owner ’ s Manual Appendix C – Performance Specification Conditions Source impedance 50Ω unless otherwise stated. All measurements ar e RMS and are made using a 22Hz to 22kHz filter unless otherwise stated. Noise Input terminated with 50Ω.
Page 11 Appendix D - Calibration Information The XLogic Multi Channel compressor is factory calibrated and should only need calibration if a potentiometer or other component has been replaced or if it is suspected that ther e is a problem with calibration.
Page 12 XLogic Multichannel Compressor Owner ’ s Manual Distortion Null Equipment Required: Calibrated audio oscillator , audio distortion analyser and oscilloscope T est Signal: 1kHz sinewave at +24dBu Input and Output: Oscillator to the Input of the channel being tested, Output to the distortion analyser .
Appendix E – Physical specification * Depth: 325mm/12.8 inches not including heatsink 365mm/14.3 inches including heatsink 400mm/15.75 inches including connectors Height: 89mm/3.5 inches (2 RU) W idth: 480mm/19 inches W eight: 5kg/1 1 pounds Power: 55 W atts/67 V A Boxed size: 520mm x 520mm x 182mm (20.
Notes Page 14 XLogic Multichannel Compressor Owner ’ s Manual.
An important point after buying a device Solid State Logic 82S6XL010D (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Solid State Logic 82S6XL010D yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Solid State Logic 82S6XL010D - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Solid State Logic 82S6XL010D you will learn all the available features of the product, as well as information on its operation. The information that you get Solid State Logic 82S6XL010D will certainly help you make a decision on the purchase.
If you already are a holder of Solid State Logic 82S6XL010D, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Solid State Logic 82S6XL010D.
However, one of the most important roles played by the user manual is to help in solving problems with Solid State Logic 82S6XL010D. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Solid State Logic 82S6XL010D along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
